[PATCH 1/3 v2] msm: Add gpio register address mapping information.
From: Gregory Bean
Date: Sat Jun 19 2010 - 12:29:26 EST
Add tables containing iomap information for gpio registers
on all supported MSM7x and QSD8x targets.
Signed-off-by: Gregory Bean <gbean@xxxxxxxxxxxxxx>
---
arch/arm/mach-msm/gpio_hw-7x30.h | 112 ++++++++++++++++++++++++++++++++++++++
arch/arm/mach-msm/gpio_hw-7xxx.h | 97 +++++++++++++++++++++++++++++++++
arch/arm/mach-msm/gpio_hw-8x50.h | 112 ++++++++++++++++++++++++++++++++++++++
arch/arm/mach-msm/gpio_hw.h | 35 ++++++++++++
4 files changed, 356 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-msm/gpio_hw-7x30.h
create mode 100644 arch/arm/mach-msm/gpio_hw-7xxx.h
create mode 100644 arch/arm/mach-msm/gpio_hw-8x50.h
create mode 100644 arch/arm/mach-msm/gpio_hw.h
diff --git a/arch/arm/mach-msm/gpio_hw-7x30.h b/arch/arm/mach-msm/gpio_hw-7x30.h
new file mode 100644
index 0000000..cedd465
--- /dev/null
+++ b/arch/arm/mach-msm/gpio_hw-7x30.h
@@ -0,0 +1,112 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+ * * Neither the name of Code Aurora Forum, Inc. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+#ifndef __ARCH_ARM_MACH_MSM_GPIO_HW_7X30_H
+#define __ARCH_ARM_MACH_MSM_GPIO_HW_7X30_H
+
+/* output value */
+#define GPIO_OUT_0 GPIO1_REG(0x00) /* gpio 15-0 */
+#define GPIO_OUT_1 GPIO2_REG(0x00) /* gpio 43-16 */
+#define GPIO_OUT_2 GPIO1_REG(0x04) /* gpio 67-44 */
+#define GPIO_OUT_3 GPIO1_REG(0x08) /* gpio 94-68 */
+#define GPIO_OUT_4 GPIO1_REG(0x0C) /* gpio 106-95 */
+#define GPIO_OUT_5 GPIO1_REG(0x50) /* gpio 133-107 */
+#define GPIO_OUT_6 GPIO1_REG(0xC4) /* gpio 150-134 */
+#define GPIO_OUT_7 GPIO1_REG(0x214) /* gpio 181-151 */
+
+/* same pin map as above, output enable */
+#define GPIO_OE_0 GPIO1_REG(0x10)
+#define GPIO_OE_1 GPIO2_REG(0x08)
+#define GPIO_OE_2 GPIO1_REG(0x14)
+#define GPIO_OE_3 GPIO1_REG(0x18)
+#define GPIO_OE_4 GPIO1_REG(0x1C)
+#define GPIO_OE_5 GPIO1_REG(0x54)
+#define GPIO_OE_6 GPIO1_REG(0xC8)
+#define GPIO_OE_7 GPIO1_REG(0x218)
+
+/* same pin map as above, input read */
+#define GPIO_IN_0 GPIO1_REG(0x34)
+#define GPIO_IN_1 GPIO2_REG(0x20)
+#define GPIO_IN_2 GPIO1_REG(0x38)
+#define GPIO_IN_3 GPIO1_REG(0x3C)
+#define GPIO_IN_4 GPIO1_REG(0x40)
+#define GPIO_IN_5 GPIO1_REG(0x44)
+#define GPIO_IN_6 GPIO1_REG(0xCC)
+#define GPIO_IN_7 GPIO1_REG(0x21C)
+
+/* same pin map as above, 1=edge 0=level interrupt */
+#define GPIO_INT_EDGE_0 GPIO1_REG(0x60)
+#define GPIO_INT_EDGE_1 GPIO2_REG(0x50)
+#define GPIO_INT_EDGE_2 GPIO1_REG(0x64)
+#define GPIO_INT_EDGE_3 GPIO1_REG(0x68)
+#define GPIO_INT_EDGE_4 GPIO1_REG(0x6C)
+#define GPIO_INT_EDGE_5 GPIO1_REG(0xC0)
+#define GPIO_INT_EDGE_6 GPIO1_REG(0xD0)
+#define GPIO_INT_EDGE_7 GPIO1_REG(0x240)
+
+/* same pin map as above, 1=positive 0=negative */
+#define GPIO_INT_POS_0 GPIO1_REG(0x70)
+#define GPIO_INT_POS_1 GPIO2_REG(0x58)
+#define GPIO_INT_POS_2 GPIO1_REG(0x74)
+#define GPIO_INT_POS_3 GPIO1_REG(0x78)
+#define GPIO_INT_POS_4 GPIO1_REG(0x7C)
+#define GPIO_INT_POS_5 GPIO1_REG(0xBC)
+#define GPIO_INT_POS_6 GPIO1_REG(0xD4)
+#define GPIO_INT_POS_7 GPIO1_REG(0x228)
+
+/* same pin map as above, interrupt enable */
+#define GPIO_INT_EN_0 GPIO1_REG(0x80)
+#define GPIO_INT_EN_1 GPIO2_REG(0x60)
+#define GPIO_INT_EN_2 GPIO1_REG(0x84)
+#define GPIO_INT_EN_3 GPIO1_REG(0x88)
+#define GPIO_INT_EN_4 GPIO1_REG(0x8C)
+#define GPIO_INT_EN_5 GPIO1_REG(0xB8)
+#define GPIO_INT_EN_6 GPIO1_REG(0xD8)
+#define GPIO_INT_EN_7 GPIO1_REG(0x22C)
+
+/* same pin map as above, write 1 to clear interrupt */
+#define GPIO_INT_CLEAR_0 GPIO1_REG(0x90)
+#define GPIO_INT_CLEAR_1 GPIO2_REG(0x68)
+#define GPIO_INT_CLEAR_2 GPIO1_REG(0x94)
+#define GPIO_INT_CLEAR_3 GPIO1_REG(0x98)
+#define GPIO_INT_CLEAR_4 GPIO1_REG(0x9C)
+#define GPIO_INT_CLEAR_5 GPIO1_REG(0xB4)
+#define GPIO_INT_CLEAR_6 GPIO1_REG(0xDC)
+#define GPIO_INT_CLEAR_7 GPIO1_REG(0x230)
+
+/* same pin map as above, 1=interrupt pending */
+#define GPIO_INT_STATUS_0 GPIO1_REG(0xA0)
+#define GPIO_INT_STATUS_1 GPIO2_REG(0x70)
+#define GPIO_INT_STATUS_2 GPIO1_REG(0xA4)
+#define GPIO_INT_STATUS_3 GPIO1_REG(0xA8)
+#define GPIO_INT_STATUS_4 GPIO1_REG(0xAC)
+#define GPIO_INT_STATUS_5 GPIO1_REG(0xB0)
+#define GPIO_INT_STATUS_6 GPIO1_REG(0xE0)
+#define GPIO_INT_STATUS_7 GPIO1_REG(0x234)
+
+#endif
diff --git a/arch/arm/mach-msm/gpio_hw-7xxx.h b/arch/arm/mach-msm/gpio_hw-7xxx.h
new file mode 100644
index 0000000..7bfd812
--- /dev/null
+++ b/arch/arm/mach-msm/gpio_hw-7xxx.h
@@ -0,0 +1,97 @@
+/* Copyright (c) 2007, Google, Inc.
+ * Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+ * * Neither the name of Code Aurora Forum, Inc. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+#ifndef __ARCH_ARM_MACH_MSM_GPIO_HW_7XXX_H
+#define __ARCH_ARM_MACH_MSM_GPIO_HW_7XXX_H
+
+/* output value */
+#define GPIO_OUT_0 GPIO1_REG(0x00) /* gpio 15-0 */
+#define GPIO_OUT_1 GPIO2_REG(0x00) /* gpio 42-16 */
+#define GPIO_OUT_2 GPIO1_REG(0x04) /* gpio 67-43 */
+#define GPIO_OUT_3 GPIO1_REG(0x08) /* gpio 94-68 */
+#define GPIO_OUT_4 GPIO1_REG(0x0C) /* gpio 106-95 */
+#define GPIO_OUT_5 GPIO1_REG(0x50) /* gpio 107-121 */
+
+/* same pin map as above, output enable */
+#define GPIO_OE_0 GPIO1_REG(0x10)
+#define GPIO_OE_1 GPIO2_REG(0x08)
+#define GPIO_OE_2 GPIO1_REG(0x14)
+#define GPIO_OE_3 GPIO1_REG(0x18)
+#define GPIO_OE_4 GPIO1_REG(0x1C)
+#define GPIO_OE_5 GPIO1_REG(0x54)
+
+/* same pin map as above, input read */
+#define GPIO_IN_0 GPIO1_REG(0x34)
+#define GPIO_IN_1 GPIO2_REG(0x20)
+#define GPIO_IN_2 GPIO1_REG(0x38)
+#define GPIO_IN_3 GPIO1_REG(0x3C)
+#define GPIO_IN_4 GPIO1_REG(0x40)
+#define GPIO_IN_5 GPIO1_REG(0x44)
+
+/* same pin map as above, 1=edge 0=level interrupt */
+#define GPIO_INT_EDGE_0 GPIO1_REG(0x60)
+#define GPIO_INT_EDGE_1 GPIO2_REG(0x50)
+#define GPIO_INT_EDGE_2 GPIO1_REG(0x64)
+#define GPIO_INT_EDGE_3 GPIO1_REG(0x68)
+#define GPIO_INT_EDGE_4 GPIO1_REG(0x6C)
+#define GPIO_INT_EDGE_5 GPIO1_REG(0xC0)
+
+/* same pin map as above, 1=positive 0=negative */
+#define GPIO_INT_POS_0 GPIO1_REG(0x70)
+#define GPIO_INT_POS_1 GPIO2_REG(0x58)
+#define GPIO_INT_POS_2 GPIO1_REG(0x74)
+#define GPIO_INT_POS_3 GPIO1_REG(0x78)
+#define GPIO_INT_POS_4 GPIO1_REG(0x7C)
+#define GPIO_INT_POS_5 GPIO1_REG(0xBC)
+
+/* same pin map as above, interrupt enable */
+#define GPIO_INT_EN_0 GPIO1_REG(0x80)
+#define GPIO_INT_EN_1 GPIO2_REG(0x60)
+#define GPIO_INT_EN_2 GPIO1_REG(0x84)
+#define GPIO_INT_EN_3 GPIO1_REG(0x88)
+#define GPIO_INT_EN_4 GPIO1_REG(0x8C)
+#define GPIO_INT_EN_5 GPIO1_REG(0xB8)
+
+/* same pin map as above, write 1 to clear interrupt */
+#define GPIO_INT_CLEAR_0 GPIO1_REG(0x90)
+#define GPIO_INT_CLEAR_1 GPIO2_REG(0x68)
+#define GPIO_INT_CLEAR_2 GPIO1_REG(0x94)
+#define GPIO_INT_CLEAR_3 GPIO1_REG(0x98)
+#define GPIO_INT_CLEAR_4 GPIO1_REG(0x9C)
+#define GPIO_INT_CLEAR_5 GPIO1_REG(0xB4)
+
+/* same pin map as above, 1=interrupt pending */
+#define GPIO_INT_STATUS_0 GPIO1_REG(0xA0)
+#define GPIO_INT_STATUS_1 GPIO2_REG(0x70)
+#define GPIO_INT_STATUS_2 GPIO1_REG(0xA4)
+#define GPIO_INT_STATUS_3 GPIO1_REG(0xA8)
+#define GPIO_INT_STATUS_4 GPIO1_REG(0xAC)
+#define GPIO_INT_STATUS_5 GPIO1_REG(0xB0)
+
+#endif
diff --git a/arch/arm/mach-msm/gpio_hw-8x50.h b/arch/arm/mach-msm/gpio_hw-8x50.h
new file mode 100644
index 0000000..9009f58
--- /dev/null
+++ b/arch/arm/mach-msm/gpio_hw-8x50.h
@@ -0,0 +1,112 @@
+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials provided
+ * with the distribution.
+ * * Neither the name of Code Aurora Forum, Inc. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED "AS IS" AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+ * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
+ * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
+ * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+#ifndef __ARCH_ARM_MACH_MSM_GPIO_HW_8X50_H
+#define __ARCH_ARM_MACH_MSM_GPIO_HW_8X50_H
+
+/* output value */
+#define GPIO_OUT_0 GPIO1_REG(0x00) /* gpio 15-0 */
+#define GPIO_OUT_1 GPIO2_REG(0x00) /* gpio 42-16 */
+#define GPIO_OUT_2 GPIO1_REG(0x04) /* gpio 67-43 */
+#define GPIO_OUT_3 GPIO1_REG(0x08) /* gpio 94-68 */
+#define GPIO_OUT_4 GPIO1_REG(0x0C) /* gpio 103-95 */
+#define GPIO_OUT_5 GPIO1_REG(0x10) /* gpio 121-104 */
+#define GPIO_OUT_6 GPIO1_REG(0x14) /* gpio 152-122 */
+#define GPIO_OUT_7 GPIO1_REG(0x18) /* gpio 164-153 */
+
+/* same pin map as above, output enable */
+#define GPIO_OE_0 GPIO1_REG(0x20)
+#define GPIO_OE_1 GPIO2_REG(0x08)
+#define GPIO_OE_2 GPIO1_REG(0x24)
+#define GPIO_OE_3 GPIO1_REG(0x28)
+#define GPIO_OE_4 GPIO1_REG(0x2C)
+#define GPIO_OE_5 GPIO1_REG(0x30)
+#define GPIO_OE_6 GPIO1_REG(0x34)
+#define GPIO_OE_7 GPIO1_REG(0x38)
+
+/* same pin map as above, input read */
+#define GPIO_IN_0 GPIO1_REG(0x50)
+#define GPIO_IN_1 GPIO2_REG(0x20)
+#define GPIO_IN_2 GPIO1_REG(0x54)
+#define GPIO_IN_3 GPIO1_REG(0x58)
+#define GPIO_IN_4 GPIO1_REG(0x5C)
+#define GPIO_IN_5 GPIO1_REG(0x60)
+#define GPIO_IN_6 GPIO1_REG(0x64)
+#define GPIO_IN_7 GPIO1_REG(0x68)
+
+/* same pin map as above, 1=edge 0=level interrupt */
+#define GPIO_INT_EDGE_0 GPIO1_REG(0x70)
+#define GPIO_INT_EDGE_1 GPIO2_REG(0x50)
+#define GPIO_INT_EDGE_2 GPIO1_REG(0x74)
+#define GPIO_INT_EDGE_3 GPIO1_REG(0x78)
+#define GPIO_INT_EDGE_4 GPIO1_REG(0x7C)
+#define GPIO_INT_EDGE_5 GPIO1_REG(0x80)
+#define GPIO_INT_EDGE_6 GPIO1_REG(0x84)
+#define GPIO_INT_EDGE_7 GPIO1_REG(0x88)
+
+/* same pin map as above, 1=positive 0=negative */
+#define GPIO_INT_POS_0 GPIO1_REG(0x90)
+#define GPIO_INT_POS_1 GPIO2_REG(0x58)
+#define GPIO_INT_POS_2 GPIO1_REG(0x94)
+#define GPIO_INT_POS_3 GPIO1_REG(0x98)
+#define GPIO_INT_POS_4 GPIO1_REG(0x9C)
+#define GPIO_INT_POS_5 GPIO1_REG(0xA0)
+#define GPIO_INT_POS_6 GPIO1_REG(0xA4)
+#define GPIO_INT_POS_7 GPIO1_REG(0xA8)
+
+/* same pin map as above, interrupt enable */
+#define GPIO_INT_EN_0 GPIO1_REG(0xB0)
+#define GPIO_INT_EN_1 GPIO2_REG(0x60)
+#define GPIO_INT_EN_2 GPIO1_REG(0xB4)
+#define GPIO_INT_EN_3 GPIO1_REG(0xB8)
+#define GPIO_INT_EN_4 GPIO1_REG(0xBC)
+#define GPIO_INT_EN_5 GPIO1_REG(0xC0)
+#define GPIO_INT_EN_6 GPIO1_REG(0xC4)
+#define GPIO_INT_EN_7 GPIO1_REG(0xC8)
+
+/* same pin map as above, write 1 to clear interrupt */
+#define GPIO_INT_CLEAR_0 GPIO1_REG(0xD0)
+#define GPIO_INT_CLEAR_1 GPIO2_REG(0x68)
+#define GPIO_INT_CLEAR_2 GPIO1_REG(0xD4)
+#define GPIO_INT_CLEAR_3 GPIO1_REG(0xD8)
+#define GPIO_INT_CLEAR_4 GPIO1_REG(0xDC)
+#define GPIO_INT_CLEAR_5 GPIO1_REG(0xE0)
+#define GPIO_INT_CLEAR_6 GPIO1_REG(0xE4)
+#define GPIO_INT_CLEAR_7 GPIO1_REG(0xE8)
+
+/* same pin map as above, 1=interrupt pending */
+#define GPIO_INT_STATUS_0 GPIO1_REG(0xF0)
+#define GPIO_INT_STATUS_1 GPIO2_REG(0x70)
+#define GPIO_INT_STATUS_2 GPIO1_REG(0xF4)
+#define GPIO_INT_STATUS_3 GPIO1_REG(0xF8)
+#define GPIO_INT_STATUS_4 GPIO1_REG(0xFC)
+#define GPIO_INT_STATUS_5 GPIO1_REG(0x100)
+#define GPIO_INT_STATUS_6 GPIO1_REG(0x104)
+#define GPIO_INT_STATUS_7 GPIO1_REG(0x108)
+
+#endif
diff --git a/arch/arm/mach-msm/gpio_hw.h b/arch/arm/mach-msm/gpio_hw.h
new file mode 100644
index 0000000..627dea5
--- /dev/null
+++ b/arch/arm/mach-msm/gpio_hw.h
@@ -0,0 +1,35 @@
+/* Copyright (c) 2007, Google, Inc.
+ * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#ifndef __ARCH_ARM_MACH_MSM_GPIO_HW_H
+#define __ARCH_ARM_MACH_MSM_GPIO_HW_H
+
+#include <mach/msm_iomap.h>
+
+#if defined(CONFIG_ARCH_MSM7X30)
+#define GPIO1_REG(off) (MSM_GPIO1_BASE + (off))
+#define GPIO2_REG(off) (MSM_GPIO2_BASE + 0x400 + (off))
+#else
+#define GPIO1_REG(off) (MSM_GPIO1_BASE + 0x800 + (off))
+#define GPIO2_REG(off) (MSM_GPIO2_BASE + 0xC00 + (off))
+#endif
+
+#if defined(CONFIG_ARCH_QSD8X50)
+#include "gpio_hw-8x50.h"
+#elif defined(CONFIG_ARCH_MSM7X30)
+#include "gpio_hw-7x30.h"
+#else
+#include "gpio_hw-7xxx.h"
+#endif
+
+#endif
--
1.7.0.4
--
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/