Re: [regression,bisected] Missing boot messages with VESAFB after VT initialization

From: Frans Pop
Date: Mon Apr 19 2010 - 08:03:21 EST

Next message: Thomas Klein: "[PATCH 1/2] ehea: error handling improvement"
Previous message: Michal Hocko: "Re: commit 9630bdd9 changes behavior of the poweroff - bug?"
In reply to: Dave Airlie: "Re: [regression,bisected] Missing boot messages with VESAFB afterVT initialization"
Next in thread: Frans Pop: "Re: [regression,bisected] Missing boot messages with VESAFB after VT initialization"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Sunday 18 April 2010, you wrote:
> On Sat, 2010-04-17 at 17:18 +0200, Frans Pop wrote:
> > Initially all messages from init scripts are displayed correctly, but
> > after the init script to set up the VT1-VT6 is run, messages from init
> > scripts are no longer displayed. Instead the display is blank with
> > only a cursor.
> >
> > However, if I switch back to VT1 from X.Org after the boot has
> > completed, the missing messages are visible.
> >
> > System is x86_64 running Debian stable ("Lenny"). I'm using VESAFB
> > (vga=791) and no KMS.
> >
> > I've bisected this to the following commit:
> > commit 477346ff74f4c2aed50e8a0db96a61069f3e5b80
> > Author: Dave Airlie <airlied@xxxxxxxxxx>
> > Date: Thu Jan 7 17:04:54 2010 +1000
> > x86-64: Allow fbdev primary video code
>
> Can you diff dmesg with/without this?

There is no relevant difference between the dmesg for 477346ff ("bisect-5":
bad) and its predecessor b0483e78 ("bisect-6": good). See attachment.

> It shouldn't do anything unless you have multiple framebuffer drivers.

Unfortunately "shouldn't" isn't always the same as "doesn't" :-)

$ cat /proc/fb
0 VESA VGA

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile
GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 0c)
00:02.1 Display controller [0380]: Intel Corporation Mobile
GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 0c)

Cheers,
FJP

--- ../aragorn/2.6.34-bisect-5 2010-04-19 13:53:01.000000000 +0200
+++ ../aragorn/2.6.34-bisect-6 2010-04-19 13:45:17.000000000 +0200
@@ -1,674 +1,674 @@
-Linux version 2.6.34-bisect (fjp@aragorn) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #10 SMP Sat Apr 17 16:35:15 CEST 2010
+Linux version 2.6.34-bisect (fjp@aragorn) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #11 SMP Sat Apr 17 16:46:53 CEST 2010
Command line: root=/dev/mapper/main-root ro vga=791 quiet
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007e7b0000 (usable)
BIOS-e820: 000000007e7b0000 - 000000007e7c5400 (reserved)
BIOS-e820: 000000007e7c5400 - 000000007e7e7fb8 (ACPI NVS)
BIOS-e820: 000000007e7e7fb8 - 000000007f000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed9a000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
NX (Execute Disable) protection: active
DMI 2.4 present.
No AGP bridge found
last_pfn = 0x7e7b0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-D3FFF write-protect
D4000-EFFFF uncachable
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 07F000000 mask FFF000000 uncachable
2 base 07E800000 mask FFF800000 uncachable
3 base 0FEDA0000 mask FFFFE0000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
initial memory mapped : 0 - 20000000
init_memory_mapping: 0000000000000000-000000007e7b0000
0000000000 - 007e600000 page 2M
007e600000 - 007e7b0000 page 4k
kernel direct mapping tables up to 7e7b0000 @ 8000-c000
-RAMDISK: 37a74000 - 37feffa4
+RAMDISK: 37a74000 - 37fefdac
ACPI: RSDP 00000000000f7980 00024 (v02 HP )
ACPI: XSDT 000000007e7c81c8 0007C (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
ACPI: FACP 000000007e7c8084 000F4 (v04 HP 30C9 00000003 HP 00000001)
ACPI: DSDT 000000007e7c8538 13484 (v01 HP nc2500 00010000 MSFT 03000001)
ACPI: FACS 000000007e7e7d80 00040
ACPI: SLIC 000000007e7c8244 00176 (v01 HPQOEM SLIC-MPC 00000001 HP 00000001)
ACPI: HPET 000000007e7c83bc 00038 (v01 HP 30C9 00000001 HP 00000001)
ACPI: APIC 000000007e7c83f4 00068 (v01 HP 30C9 00000001 HP 00000001)
ACPI: MCFG 000000007e7c845c 0003C (v01 HP 30C9 00000001 HP 00000001)
ACPI: TCPA 000000007e7c8498 00032 (v02 HP 30C9 00000001 HP 00000001)
ACPI: ASF! 000000007e7c84cc 00069 (v16 HP CHIMAYU 00000001 HP 00000000)
ACPI: SSDT 000000007e7db9bc 002BE (v01 HP HPQPAT 00000001 MSFT 03000001)
ACPI: SSDT 000000007e7dc640 0025F (v01 HP Cpu0Tst 00003000 INTL 20060317)
ACPI: SSDT 000000007e7dc89f 000A6 (v01 HP Cpu1Tst 00003000 INTL 20060317)
ACPI: SSDT 000000007e7dc945 004D7 (v01 HP CpuPm 00003000 INTL 20060317)
ACPI: Local APIC address 0xfee00000
(8 early reservations) ==> bootmem [0000000000 - 007e7b0000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0001000000 - 00015bee70] TEXT DATA BSS ==> [0001000000 - 00015bee70]
- #2 [0037a74000 - 0037feffa4] RAMDISK ==> [0037a74000 - 0037feffa4]
+ #2 [0037a74000 - 0037fefdac] RAMDISK ==> [0037a74000 - 0037fefdac]
#3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#4 [00015bf000 - 00015bf18c] BRK ==> [00015bf000 - 00015bf18c]
#5 [0000001000 - 0000003000] TRAMPOLINE ==> [0000001000 - 0000003000]
#6 [0000003000 - 0000007000] ACPI WAKEUP ==> [0000003000 - 0000007000]
#7 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ffffea0000000000-ffffea0001bfffff] PMD -> [ffff880001a00000-ffff8800035fffff] on node 0
Zone PFN ranges:
DMA 0x00000000 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00100000
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000000 -> 0x0000009f
0: 0x00000100 -> 0x0007e7b0
On node 0 totalpages: 517967
DMA zone: 56 pages used for memmap
DMA zone: 105 pages reserved
DMA zone: 3838 pages, LIFO batch:0
DMA32 zone: 7027 pages used for memmap
DMA32 zone: 506941 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
Allocating PCI resources starting at 7f000000 (gap: 7f000000:7fc00000)
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff880001600000 s82008 r8192 d24488 u1048576
pcpu-alloc: s82008 r8192 d24488 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 510779
Kernel command line: root=/dev/mapper/main-root ro vga=791 quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Checking aperture...
No AGP bridge found
-Memory: 2027468k/2072256k available (2732k kernel code, 388k absent, 43660k reserved, 1952k data, 524k init)
+Memory: 2027468k/2072256k available (2732k kernel code, 388k absent, 43660k reserved, 1953k data, 524k init)
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
NR_IRQS:512
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
-Detected 1330.008 MHz processor.
-Calibrating delay loop (skipped), value calculated using timer frequency.. 2660.01 BogoMIPS (lpj=5320032)
+Detected 1329.929 MHz processor.
+Calibrating delay loop (skipped), value calculated using timer frequency.. 2659.85 BogoMIPS (lpj=5319716)
Security Framework initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 256
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
Performance Events: Core2 events, Intel PMU driver.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20091214
ftrace: converting mcount calls to 0f 1f 44 00 00
-ftrace: allocating 13895 entries in 55 pages
+ftrace: allocating 13894 entries in 55 pages
Setting APIC routing to flat
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU U7700 @ 1.33GHz stepping 0d
Booting Node 0, Processors #1 Ok.
CPU1: Thermal monitoring handled by SMI
Brought up 2 CPUs
-Total of 2 processors activated (5319.99 BogoMIPS).
+Total of 2 processors activated (5319.82 BogoMIPS).
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
ACPI: EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
ACPI: Power Resource [C29F] (on)
ACPI: Power Resource [C1C7] (off)
ACPI: Power Resource [C3AD] (off)
ACPI: Power Resource [C3B0] (off)
ACPI: Power Resource [C3C3] (off)
ACPI: Power Resource [C3C4] (off)
ACPI: Power Resource [C3C5] (off)
ACPI: Power Resource [C3C6] (off)
ACPI: Power Resource [C3C7] (off)
ACPI: No dock devices found.
ACPI: PCI Root Bridge [C003] (0000:00)
pci_root PNP0A08:00: ignoring host bridge windows from ACPI; boot with "pci=use_crs" to use them
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x7e800000-0xfedfffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xfffffffe] invalid; aligning end to 16-byte boundary
pci_root PNP0A08:00: host bridge window [mem 0xfee01000-0xffffffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000dffff] (ignored)
pci 0000:00:02.0: reg 10: [mem 0xe0400000-0xe04fffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0x2000-0x2007]
pci 0000:00:02.1: reg 10: [mem 0xe0500000-0xe05fffff 64bit]
pci 0000:00:03.0: reg 10: [mem 0xe0600000-0xe060000f 64bit]
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:03.2: reg 10: [io 0x2008-0x200f]
pci 0000:00:03.2: reg 14: [io 0x2010-0x2013]
pci 0000:00:03.2: reg 18: [io 0x2018-0x201f]
pci 0000:00:03.2: reg 1c: [io 0x2020-0x2023]
pci 0000:00:03.2: reg 20: [io 0x2030-0x203f]
pci 0000:00:03.3: reg 10: [io 0x2040-0x2047]
pci 0000:00:03.3: reg 14: [mem 0xe0601000-0xe0601fff]
pci 0000:00:19.0: reg 10: [mem 0xe0620000-0xe063ffff]
pci 0000:00:19.0: reg 14: [mem 0xe0640000-0xe0640fff]
pci 0000:00:19.0: reg 18: [io 0x2060-0x207f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io 0x2080-0x209f]
pci 0000:00:1a.1: reg 20: [io 0x20a0-0x20bf]
pci 0000:00:1a.7: reg 10: [mem 0xe0641000-0xe06413ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xe0644000-0xe0647fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x20c0-0x20df]
pci 0000:00:1d.1: reg 20: [io 0x20e0-0x20ff]
pci 0000:00:1d.2: reg 20: [io 0x2100-0x211f]
pci 0000:00:1d.7: reg 10: [mem 0xe0648000-0xe06483ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x1100-0x113f] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0500 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 02e8 (mask 0007)
pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 20: [io 0x2120-0x212f]
pci 0000:00:1c.0: PCI bridge to [bus 08-08]
pci 0000:10:00.0: reg 10: [mem 0xe0000000-0xe0001fff 64bit]
pci 0000:10:00.0: PME# supported from D0 D3hot D3cold
pci 0000:10:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 10-10]
pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe00fffff]
pci 0000:02:06.0: reg 10: [mem 0xe0100000-0xe0100fff]
pci 0000:02:06.0: supports D1 D2
pci 0000:02:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:06.0: PME# disabled
pci 0000:02:06.1: reg 10: [mem 0xe0101000-0xe01017ff]
pci 0000:02:06.1: supports D1 D2
pci 0000:02:06.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:06.1: PME# disabled
pci 0000:02:06.2: reg 10: [mem 0xe0102000-0xe01020ff]
pci 0000:02:06.2: supports D1 D2
pci 0000:02:06.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:06.2: PME# disabled
pci 0000:02:06.3: reg 10: [mem 0xe0103000-0xe01030ff]
pci 0000:02:06.3: supports D1 D2
pci 0000:02:06.3: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:02:06.3: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xe0100000-0xe03fffff]
pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0B2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C11F._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.C003.C133._PRT]
ACPI: PCI Interrupt Link [C12F] (IRQs *10 11)
ACPI: PCI Interrupt Link [C130] (IRQs *10 11)
ACPI: PCI Interrupt Link [C131] (IRQs 10 *11)
ACPI: PCI Interrupt Link [C132] (IRQs 10 11) *5
ACPI: PCI Interrupt Link [C142] (IRQs *10 11)
ACPI: PCI Interrupt Link [C143] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [C144] (IRQs 10 *11)
ACPI Exception: AE_NOT_FOUND, Evaluating _PRS (20091214/pci_link-184)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:00: [mem 0x00100000-0x7e7fffff] could not be reserved
system 00:0a: [io 0x0500-0x055f] has been reserved
system 00:0a: [io 0x0800-0x080f] has been reserved
system 00:0a: [mem 0xffb00000-0xffbfffff] has been reserved
system 00:0a: [mem 0xfff00000-0xffffffff] has been reserved
system 00:0c: [io 0x04d0-0x04d1] has been reserved
system 00:0c: [io 0x02f8-0x02ff] has been reserved
system 00:0c: [io 0x03f8-0x03ff] has been reserved
system 00:0c: [io 0x1000-0x107f] has been reserved
system 00:0c: [io 0x1100-0x113f] has been reserved
system 00:0c: [io 0x1200-0x121f] has been reserved
system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0c: [mem 0xfec00000-0xfec000ff] could not be reserved
system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0c: [mem 0xfed90000-0xfed99fff] has been reserved
system 00:0d: [mem 0x000cee00-0x000cffff] has been reserved
system 00:0d: [mem 0x000d2000-0x000d3fff] has been reserved
system 00:0d: [mem 0xfeda0000-0xfedbffff] has been reserved
system 00:0d: [mem 0xfee00000-0xfee00fff] has been reserved
pci 0000:00:1e.0: BAR 9: assigned [mem 0x80000000-0x83ffffff pref]
pci 0000:00:1e.0: BAR 7: assigned [io 0x3000-0x3fff]
pci 0000:00:1c.0: PCI bridge to [bus 08-08]
pci 0000:00:1c.0: bridge window [io disabled]
pci 0000:00:1c.0: bridge window [mem disabled]
pci 0000:00:1c.0: bridge window [mem pref disabled]
pci 0000:00:1c.1: PCI bridge to [bus 10-10]
pci 0000:00:1c.1: bridge window [io disabled]
pci 0000:00:1c.1: bridge window [mem 0xe0000000-0xe00fffff]
pci 0000:00:1c.1: bridge window [mem pref disabled]
pci 0000:02:06.0: BAR 9: assigned [mem 0x80000000-0x83ffffff pref]
pci 0000:02:06.0: BAR 10: assigned [mem 0x84000000-0x87ffffff]
pci 0000:02:06.0: BAR 7: assigned [io 0x3000-0x30ff]
pci 0000:02:06.0: BAR 8: assigned [io 0x3400-0x34ff]
pci 0000:02:06.0: CardBus bridge to [bus 03-06]
pci 0000:02:06.0: bridge window [io 0x3000-0x30ff]
pci 0000:02:06.0: bridge window [io 0x3400-0x34ff]
pci 0000:02:06.0: bridge window [mem 0x80000000-0x83ffffff pref]
pci 0000:02:06.0: bridge window [mem 0x84000000-0x87ffffff]
pci 0000:00:1e.0: PCI bridge to [bus 02-03]
pci 0000:00:1e.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1e.0: bridge window [mem 0xe0100000-0xe03fffff]
pci 0000:00:1e.0: bridge window [mem 0x80000000-0x83ffffff pref]
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci 0000:02:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:10: resource 1 [mem 0xe0000000-0xe00fffff]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xe0100000-0xe03fffff]
pci_bus 0000:02: resource 2 [mem 0x80000000-0x83ffffff pref]
pci_bus 0000:02: resource 3 [io 0x0000-0xffff]
pci_bus 0000:02: resource 4 [mem 0x00000000-0xffffffffffffffff]
pci_bus 0000:03: resource 0 [io 0x3000-0x30ff]
pci_bus 0000:03: resource 1 [io 0x3400-0x34ff]
pci_bus 0000:03: resource 2 [mem 0x80000000-0x83ffffff pref]
pci_bus 0000:03: resource 3 [mem 0x84000000-0x87ffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
UDP hash table entries: 1024 (order: 4, 98304 bytes)
UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 5615k freed
audit: initializing netlink socket (disabled)
-type=2000 audit(1271677647.651:1): initialized
+type=2000 audit(1271677401.651:1): initialized
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 3972
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004100000, using 3072k, total 7616k
vesafb: mode is 1024x768x16, linelength=2048, pages=3
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Linux agpgart interface v0.103
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
0000:00:03.3: ttyS0 at I/O 0x2040 (irq = 17) is a 16550A
brd: module loaded
PNP: PS/2 Controller [PNP0303:C29C,PNP0f13:C29D] at 0x60,0x64 irq 1,12
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
registered taskstats version 1
-rtc_cmos 00:06: setting system clock to 2010-04-19 11:47:28 UTC (1271677648)
+rtc_cmos 00:06: setting system clock to 2010-04-19 11:43:22 UTC (1271677402)
Freeing unused kernel memory: 524k freed
input: AT Translated Set 2 keyboard as /class/input/input0
ACPI: Fan [C3B1] (off)
ACPI: Fan [C3B2] (off)
ACPI: Fan [C3C8] (off)
ACPI: Fan [C3C9] (off)
ACPI: Fan [C3CA] (off)
ACPI: Fan [C3CB] (off)
ACPI: Fan [C3CC] (off)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ6] (25 C)
thermal LNXTHERM:02: registered as thermal_zone1
-ACPI: Thermal Zone [TZ0] (54 C)
+ACPI: Thermal Zone [TZ0] (53 C)
thermal LNXTHERM:03: registered as thermal_zone2
ACPI: Thermal Zone [TZ1] (55 C)
thermal LNXTHERM:04: registered as thermal_zone3
ACPI: Thermal Zone [TZ3] (43 C)
thermal LNXTHERM:05: registered as thermal_zone4
ACPI: Thermal Zone [TZ4] (30 C)
thermal LNXTHERM:06: registered as thermal_zone5
-ACPI: Thermal Zone [TZ5] (49 C)
-ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
-ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
-ehci_hcd 0000:00:1a.7: setting latency timer to 64
-ehci_hcd 0000:00:1a.7: EHCI Host Controller
-ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
-ehci_hcd 0000:00:1a.7: debug port 1
-ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
+ACPI: Thermal Zone [TZ5] (50 C)
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k2
e1000e: Copyright (c) 1999 - 2009 Intel Corporation.
-SCSI subsystem initialized
-ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0641000
-ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
-hub 1-0:1.0: USB hub found
-hub 1-0:1.0: 4 ports detected
e1000e 0000:00:19.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 26 for MSI/MSI-X
+ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ricoh-mmc: Ricoh MMC Controller disabling driver
ricoh-mmc: Copyright(c) Philip Langdale
ricoh-mmc: Ricoh MMC controller found at 0000:02:06.3 [1180:0843] (rev 11)
ricoh-mmc: Controller is now disabled.
+SCSI subsystem initialized
libata version 3.00 loaded.
-ohci1394 0000:02:06.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
-ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[e0101000-e01017ff] Max Packet=[2048] IR/IT contexts=[4/4]
sdhci-pci 0000:02:06.2: SDHCI controller found [1180:0822] (rev 21)
sdhci-pci 0000:02:06.2: PCI INT C -> GSI 20 (level, low) -> IRQ 20
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:02:06.2] using PIO
+ohci1394 0000:02:06.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
+ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[e0101000-e01017ff] Max Packet=[2048] IR/IT contexts=[4/4]
0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1e:68:5e:3b:04
0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
0000:00:19.0: eth0: MAC: 6, PHY: 6, PBA No: ffffff-0ff
+ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
+ehci_hcd 0000:00:1a.7: setting latency timer to 64
+ehci_hcd 0000:00:1a.7: EHCI Host Controller
+ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
+ehci_hcd 0000:00:1a.7: debug port 1
+ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
+ehci_hcd 0000:00:1a.7: irq 18, io mem 0xe0641000
+ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
+hub 1-0:1.0: USB hub found
+hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe0648000
-usb 1-2: new high speed USB device using ehci_hcd and address 3
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: quirky BIOS, skipping spindown on poweroff and hibernation
ata_piix 0000:00:1f.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x2120 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x2128 irq 15
+ata2: port disabled. ignoring.
pata_acpi 0000:00:03.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pata_acpi 0000:00:03.2: setting latency timer to 64
pata_acpi 0000:00:03.2: PCI INT C disabled
-ata2: port disabled. ignoring.
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00002080
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 17, io base 0x000020a0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 20, io base 0x000020c0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 22, io base 0x000020e0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002100
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
-hub 1-2:1.0: USB hub found
-hub 1-2:1.0: 4 ports detected
ata1.00: ATA-7: SAMSUNG HS122JC, GQ100-04, max UDMA/100
ata1.00: 234441648 sectors, multi 16: LBA
ata1.01: ATAPI: MATSHITADVD-RAM UJ-852S, 1.02, max MWDMA2
ata1.00: configured for UDMA/100
ata1.01: configured for MWDMA2
scsi 0:0:0:0: Direct-Access ATA SAMSUNG HS122JC GQ10 PQ: 0 ANSI: 5
scsi 0:0:1:0: CD-ROM MATSHITA DVD-RAM UJ-852S 1.02 PQ: 0 ANSI: 5
Uniform Multi-Platform E-IDE driver
sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda3 sda4 < sda5 sda6 sda7 >
+sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
Uniform CD-ROM driver Revision: 3.20
sr 0:0:1:0: Attached scsi CD-ROM sr0
-sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 0:0:1:0: Attached scsi generic sg1 type 5
+usb 1-2: new high speed USB device using ehci_hcd and address 3
+hub 1-2:1.0: USB hub found
+hub 1-2:1.0: 4 ports detected
usb 3-1: new full speed USB device using uhci_hcd and address 2
-usb 5-2: new full speed USB device using uhci_hcd and address 2
-ieee1394: Host added: ID:BUS[0-00:1023] GUID[001b249929192210]
device-mapper: ioctl: 4.16.0-ioctl (2009-11-05) initialised: dm-devel@xxxxxxxxxx
+ieee1394: Host added: ID:BUS[0-00:1023] GUID[001b249929192210]
+usb 5-2: new full speed USB device using uhci_hcd and address 2
usb 1-2.2: new full speed USB device using ehci_hcd and address 4
usb 1-2.3: new low speed USB device using ehci_hcd and address 5
usbcore: registered new interface driver hiddev
input: Logitech USB Receiver as /class/input/input1
generic-usb 0003:046D:C50D.0001: input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1a.7-2.3/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 1-2.4: new low speed USB device using ehci_hcd and address 6
input: USB Compliant Keyboard as /class/input/input2
generic-usb 0003:05A4:9841.0002: input: USB HID v1.10 Keyboard [USB Compliant Keyboard] on usb-0000:00:1a.7-2.4/input0
input: USB Compliant Keyboard as /class/input/input3
generic-usb 0003:05A4:9841.0003: input: USB HID v1.10 Device [USB Compliant Keyboard] on usb-0000:00:1a.7-2.4/input1
PM: Starting manual resume from disk
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-1): mounted filesystem with ordered data mode
udevd version 125 started
input: Sleep Button as /class/input/input4
ACPI: Sleep Button [C2BF]
input: Lid Switch as /class/input/input5
ACPI: Lid Switch [C155]
input: Power Button as /class/input/input6
ACPI: Power Button [PWRF]
ACPI: SSDT 000000007e7dbd42 0027F (v01 HP Cpu0Ist 00003000 INTL 20060317)
ACPI: SSDT 000000007e7dc046 005FA (v01 HP Cpu0Cst 00003001 INTL 20060317)
ACPI: AC Adapter [C23B] (on-line)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Marking TSC unstable due to TSC halts in idle
-Switching to clocksource hpet
ACPI: SSDT 000000007e7dbc7a 000C8 (v01 HP Cpu1Ist 00003000 INTL 20060317)
ACPI: SSDT 000000007e7dbfc1 00085 (v01 HP Cpu1Cst 00003000 INTL 20060317)
+Switching to clocksource hpet
agpgart-intel 0000:00:00.0: Intel 965GM Chipset
agpgart-intel 0000:00:00.0: detected 7676K stolen memory
+agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
ACPI: Battery Slot [C23D] (battery present)
ACPI: WMI: Mapper loaded
-agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
lis3lv02d: hardware type NC2510 found.
lis3lv02d: 12 bits sensor found
-tpm_tis 00:02: 1.2 TPM (device-id 0xB, rev-id 16)
input: ST LIS3LV02DL Accelerometer as /class/input/input7
Registered led device: hp::hddprotect
lis3lv02d driver loaded.
+tpm_tis 00:02: 1.2 TPM (device-id 0xB, rev-id 16)
input: PC Speaker as /class/input/input8
+usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x3102
+usbcore: registered new interface driver usblp
+input: PS/2 Generic Mouse as /class/input/input9
cfg80211: Using static regulatory domain info
cfg80211: Regulatory domain: 00
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (600 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 2000 mBm)
cfg80211: Calling CRDA to update world regulatory domain
cfg80211: Calling CRDA for country: EU
yenta_cardbus 0000:02:06.0: CardBus bridge found [103c:30c9]
yenta_cardbus 0000:02:06.0: ISA IRQ mask 0x0cb8, PCI irq 18
yenta_cardbus 0000:02:06.0: Socket status: 30000006
pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe03fffff
yenta_cardbus 0000:02:06.0: pcmcia: parent PCI bridge Memory window: 0x80000000 - 0x83ffffff
-usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x3102
-usbcore: registered new interface driver usblp
-input: HP WMI hotkeys as /class/input/input9
+input: HP WMI hotkeys as /class/input/input10
+Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa00000
+input: SynPS/2 Synaptics TouchPad as /class/input/input11
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 2.6.34-bisect-kd
iwlagn: Copyright(c) 2003-2009 Intel Corporation
iwlagn 0000:10:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:10:00.0: setting latency timer to 64
iwlagn 0000:10:00.0: Detected Intel Wireless WiFi Link 4965AGN REV=0x4
iwlagn 0000:10:00.0: Tunable channels: 11 802.11bg, 13 802.11a channels
iwlagn 0000:10:00.0: irq 27 for MSI/MSI-X
phy0: Selected rate control algorithm 'iwl-agn-rs'
-input: PS/2 Generic Mouse as /class/input/input10
HDA Intel 0000:00:1b.0: power state changed by ACPI to D0
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:00:1b.0: irq 28 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
-input: HDA Digital PCBeep as /class/input/input11
-Synaptics Touchpad, model: 1, fw: 6.3, id: 0x1a0b1, caps: 0xa04711/0xa00000
-input: SynPS/2 Synaptics TouchPad as /class/input/input12
+input: HDA Digital PCBeep as /class/input/input12
EXT3-fs (dm-1): using internal journal
loop: module loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-5): using internal journal
EXT3-fs (dm-5): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-2): using internal journal
EXT3-fs (dm-2): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-3): using internal journal
EXT3-fs (dm-3): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-4): using internal journal
EXT3-fs (dm-4): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-6): using internal journal
EXT3-fs (dm-6): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-9): using internal journal
EXT3-fs (dm-9): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-12): using internal journal
EXT3-fs (dm-12): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-8): using internal journal
EXT3-fs (dm-8): mounted filesystem with ordered data mode
kjournald starting. Commit interval 5 seconds
EXT3-fs (dm-10): using internal journal
EXT3-fs (dm-10): mounted filesystem with ordered data mode
Adding 2097144k swap on /dev/mapper/main-swap. Priority:-1 extents:1 across:2097144k
iwlagn 0000:10:00.0: firmware: requesting iwlwifi-4965-2.ucode
iwlagn 0000:10:00.0: loaded firmware version 228.57.2.23
wlan0: direct probe to AP 00:14:c1:38:e5:15 (try 1)
wlan0: direct probe responded
wlan0: authenticate with AP 00:14:c1:38:e5:15 (try 1)
wlan0: authenticated
wlan0: associate with AP 00:14:c1:38:e5:15 (try 1)
wlan0: RX AssocResp from 00:14:c1:38:e5:15 (capab=0x411 status=0 aid=1)
wlan0: associated
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
wlan0: no IPv6 routers present
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:02.0: setting latency timer to 64
pci 0000:00:02.0: irq 29 for MSI/MSI-X
acpi device:00: registered as cooling_device9
input: Video Bus as /class/input/input13
ACPI: Video Device [C09A] (multi-head: yes rom: no post: no)
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0

Next message: Thomas Klein: "[PATCH 1/2] ehea: error handling improvement"
Previous message: Michal Hocko: "Re: commit 9630bdd9 changes behavior of the poweroff - bug?"
In reply to: Dave Airlie: "Re: [regression,bisected] Missing boot messages with VESAFB afterVT initialization"
Next in thread: Frans Pop: "Re: [regression,bisected] Missing boot messages with VESAFB after VT initialization"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]