Re: [PATCH 05/11] ST SPEAr: Added clock framework for SPEAr platform and machines

From: Linus Walleij
Date: Fri Mar 12 2010 - 03:46:11 EST


2010/3/11 Shiraz HASHIM <shiraz.hashim@xxxxxx>:
> On 3/11/2010 12:30 PM, Linus Walleij wrote:
>> 2010/3/3 Viresh KUMAR <viresh.kumar@xxxxxx>:
>> (...)
>>> +       if (unlikely(clk->flags & RESET_TO_ENABLE))
>>> +               val &= ~(1 << clk->en_reg_bit);
>>> +       else
>>> +               val |= 1 << clk->en_reg_bit;
>>> +       writel(val, clk->en_reg);
>>
>> I don't understand one bit of this. (...)
>
> The intention to use RESET_TO_ENABLE flag is to generalize clock
> enable/disable across platforms.

I misread the entire thing, there was some bad parsing inside my head...
Sorry about this.

>> OMAP uses CPUfreq but that is really about the CPU. As it happens, all
>> their clk:s always change frequency at the same operating points as the
>> CPU. So they can have pre/post calls from CPUfreq in their code, but
>> this will not work with things like PrimeCells where other users of the cell
>> may not have operating points correlated with CPU operating points.
>>
>> (I'm not requesting you to solve this problem, more to be aware of it.)
>
> I think generally in embedded systems (at least in our case :) ) the CPU clock
> itself is not completly independent. It is generally tied with some system
> clock, which has an impact on bus and peripheral clocks. In that sense cpu freq
> would be a better mean to notify frequency change.
> In any case, clock framework don't intend to do it. It only need to reflect
> correct system state. Is this understanding correct?

Currently it's like that but I think clk really needs a frequency change
notification mechanism. I will have to deal with it some day I think :-/

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/