[PATCH 10/13] serial: bfin_sport_uart: only enable SPORT TX if data is to be sent

From: Mike Frysinger
Date: Tue Mar 09 2010 - 12:23:59 EST


From: Sonic Zhang <sonic.zhang@xxxxxxxxxx>

Rather than always turn on the SPORT TX interrupt, only do it when we've
actually queued up data for transmission. This avoids useless interrupt
processing.

Signed-off-by: Sonic Zhang <sonic.zhang@xxxxxxxxxx>
Signed-off-by: Mike Frysinger <vapier@xxxxxxxxxx>
---
drivers/serial/bfin_sport_uart.c | 30 +++++++++++++++++++++---------
1 files changed, 21 insertions(+), 9 deletions(-)

diff --git a/drivers/serial/bfin_sport_uart.c b/drivers/serial/bfin_sport_uart.c
index 1b22c59..9d777e4 100644
--- a/drivers/serial/bfin_sport_uart.c
+++ b/drivers/serial/bfin_sport_uart.c
@@ -53,7 +53,7 @@ struct sport_uart_port {
#endif
};

-static void sport_uart_tx_chars(struct sport_uart_port *up);
+static int sport_uart_tx_chars(struct sport_uart_port *up);
static void sport_stop_tx(struct uart_port *port);

static inline void tx_one_byte(struct sport_uart_port *up, unsigned int value)
@@ -306,18 +306,24 @@ static int sport_startup(struct uart_port *port)
return ret;
}

-static void sport_uart_tx_chars(struct sport_uart_port *up)
+/*
+ * sport_uart_tx_chars
+ *
+ * ret 1 means need to enable sport.
+ * ret 0 means do nothing.
+ */
+static int sport_uart_tx_chars(struct sport_uart_port *up)
{
struct circ_buf *xmit = &up->port.state->xmit;

if (SPORT_GET_STAT(up) & TXF)
- return;
+ return 0;

if (up->port.x_char) {
tx_one_byte(up, up->port.x_char);
up->port.icount.tx++;
up->port.x_char = 0;
- return;
+ return 1;
}

if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
@@ -328,7 +334,7 @@ static void sport_uart_tx_chars(struct sport_uart_port *up)
*/
if (SPORT_GET_STAT(up) & TXHRE)
sport_stop_tx(&up->port);
- return;
+ return 0;
}

while(!(SPORT_GET_STAT(up) & TXF) && !uart_circ_empty(xmit)) {
@@ -339,6 +345,8 @@ static void sport_uart_tx_chars(struct sport_uart_port *up)

if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(&up->port);
+
+ return 1;
}

static unsigned int sport_tx_empty(struct uart_port *port)
@@ -360,6 +368,9 @@ static void sport_stop_tx(struct uart_port *port)

pr_debug("%s enter\n", __func__);

+ if (!(SPORT_GET_TCR1(up) & TSPEN))
+ return;
+
/* Although the hold register is empty, last byte is still in shift
* register and not sent out yet. So, put a dummy data into TX FIFO.
* Then, sport tx stops when last byte is shift out and the dummy
@@ -382,11 +393,12 @@ static void sport_start_tx(struct uart_port *port)
pr_debug("%s enter\n", __func__);

/* Write data into SPORT FIFO before enable SPROT to transmit */
- sport_uart_tx_chars(up);
+ if (sport_uart_tx_chars(up)) {
+ /* Enable transmit, then an interrupt will generated */
+ SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN));
+ SSYNC();
+ }

- /* Enable transmit, then an interrupt will generated */
- SPORT_PUT_TCR1(up, (SPORT_GET_TCR1(up) | TSPEN));
- SSYNC();
pr_debug("%s exit\n", __func__);
}

--
1.7.0.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/