Re: Kernel Bug in ATA or SMART area

[Mikael Pettersson]

Axel Uhl writes:
 > I now enabled IO/APIC in my kernel. See attached .config. I also enabled 
 >   pata_via but was unsure which IDE driver to disable.

That would be VIA82CXXX. But all your PATA/SATA controllers are now driven
by libata, so you can disable IDE, i.e. set CONFIG_IDE=n.

 > The kernel 
 > rebooted fine. The following appeared in my syslog when the smartctl 
 > command spinned up the disk:
 > 
 > Feb 19 18:57:09 homemp3 kernel: ata5.00: exception Emask 0x0 SAct 0x0 
 > SErr 0x0 action 0x6 frozen
 > Feb 19 18:57:09 homemp3 kernel: ata5.00: failed command: SMART
 > Feb 19 18:57:09 homemp3 kernel: ata5.00: cmd 
 > b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0
 > Feb 19 18:57:09 homemp3 kernel:          res 
 > 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
 > Feb 19 18:57:09 homemp3 kernel: ata5.00: status: { DRDY }
 > Feb 19 18:57:09 homemp3 kernel: ata5: soft resetting link
 > Feb 19 18:57:09 homemp3 kernel: ata5.00: configured for UDMA/133
 > Feb 19 18:57:09 homemp3 kernel: ata5: EH complete
 > 
 > 
 > At least it seems that the kernel recovered better from this exception 
 > than before. In particular, IRQ10 didn't get disabled and so I/O 
 > continued to work fine. Thanks for the hint.
 > 
 > Would you consider the exception above a serious problem that should be 
 > taken care of somehow?

Apparently this disk likes to complain when issued a SMART command while spun
down, but as libata EH recovers nicely there's no real reason to worry.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/