[PATCH net-next 12/15] drivers/net/sky2.c: Use (pr|netdev)_<level> macro helpers

From: Joe Perches
Date: Wed Feb 17 2010 - 20:03:42 EST


Add #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
Remove #define PFX
Use pr_<level>
Use netdev_<level>

Signed-off-by: Joe Perches <joe@xxxxxxxxxxx>
---
drivers/net/sky2.c | 63 ++++++++++++++++++++++-----------------------------
1 files changed, 27 insertions(+), 36 deletions(-)

diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c
index a1198f1..d1e98e2 100644
--- a/drivers/net/sky2.c
+++ b/drivers/net/sky2.c
@@ -22,6 +22,8 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/

+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/crc32.h>
#include <linux/kernel.h>
#include <linux/module.h>
@@ -51,7 +53,6 @@

#define DRV_NAME "sky2"
#define DRV_VERSION "1.27"
-#define PFX DRV_NAME " "

/*
* The Yukon II chipset takes 64 bit command blocks (called list elements)
@@ -1212,8 +1213,7 @@ static void sky2_rx_stop(struct sky2_port *sky2)
== sky2_read8(hw, RB_ADDR(rxq, Q_RL)))
goto stopped;

- printk(KERN_WARNING PFX "%s: receiver stop failed\n",
- sky2->netdev->name);
+ netdev_warn(sky2->netdev, "receiver stop failed\n");
stopped:
sky2_write32(hw, Q_ADDR(rxq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST);

@@ -1555,7 +1555,7 @@ static void sky2_hw_up(struct sky2_port *sky2)
if (ramsize > 0) {
u32 rxspace;

- pr_debug(PFX "%s: ram buffer %dK\n", sky2->netdev->name, ramsize);
+ netdev_dbg(sky2->netdev, "ram buffer %dK\n", ramsize);
if (ramsize < 16)
rxspace = ramsize / 2;
else
@@ -2070,13 +2070,12 @@ static int sky2_autoneg_done(struct sky2_port *sky2, u16 aux)
advert = gm_phy_read(hw, port, PHY_MARV_AUNE_ADV);
lpa = gm_phy_read(hw, port, PHY_MARV_AUNE_LP);
if (lpa & PHY_M_AN_RF) {
- printk(KERN_ERR PFX "%s: remote fault", sky2->netdev->name);
+ netdev_err(sky2->netdev, "remote fault\n");
return -1;
}

if (!(aux & PHY_M_PS_SPDUP_RES)) {
- printk(KERN_ERR PFX "%s: speed/duplex mismatch",
- sky2->netdev->name);
+ netdev_err(sky2->netdev, "speed/duplex mismatch\n");
return -1;
}

@@ -2195,10 +2194,10 @@ static void sky2_tx_timeout(struct net_device *dev)

netif_err(sky2, timer, dev, "tx timeout\n");

- printk(KERN_DEBUG PFX "%s: transmit ring %u .. %u report=%u done=%u\n",
- dev->name, sky2->tx_cons, sky2->tx_prod,
- sky2_read16(hw, sky2->port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
- sky2_read16(hw, Q_ADDR(txqaddr[sky2->port], Q_DONE)));
+ netdev_printk(KERN_DEBUG, dev, "transmit ring %u .. %u report=%u done=%u\n",
+ sky2->tx_cons, sky2->tx_prod,
+ sky2_read16(hw, sky2->port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
+ sky2_read16(hw, Q_ADDR(txqaddr[sky2->port], Q_DONE)));

/* can't restart safely under softirq */
schedule_work(&hw->restart_work);
@@ -2614,8 +2613,7 @@ static int sky2_status_intr(struct sky2_hw *hw, int to_do, u16 idx)

default:
if (net_ratelimit())
- printk(KERN_WARNING PFX
- "unknown status opcode 0x%x\n", opcode);
+ pr_warning("unknown status opcode 0x%x\n", opcode);
}
} while (hw->st_idx != idx);

@@ -2634,41 +2632,37 @@ static void sky2_hw_error(struct sky2_hw *hw, unsigned port, u32 status)
struct net_device *dev = hw->dev[port];

if (net_ratelimit())
- printk(KERN_INFO PFX "%s: hw error interrupt status 0x%x\n",
- dev->name, status);
+ netdev_info(dev, "hw error interrupt status 0x%x\n", status);

if (status & Y2_IS_PAR_RD1) {
if (net_ratelimit())
- printk(KERN_ERR PFX "%s: ram data read parity error\n",
- dev->name);
+ netdev_err(dev, "ram data read parity error\n");
/* Clear IRQ */
sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_RD_PERR);
}

if (status & Y2_IS_PAR_WR1) {
if (net_ratelimit())
- printk(KERN_ERR PFX "%s: ram data write parity error\n",
- dev->name);
+ netdev_err(dev, "ram data write parity error\n");

sky2_write16(hw, RAM_BUFFER(port, B3_RI_CTRL), RI_CLR_WR_PERR);
}

if (status & Y2_IS_PAR_MAC1) {
if (net_ratelimit())
- printk(KERN_ERR PFX "%s: MAC parity error\n", dev->name);
+ netdev_err(dev, "MAC parity error\n");
sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_CLI_TX_PE);
}

if (status & Y2_IS_PAR_RX1) {
if (net_ratelimit())
- printk(KERN_ERR PFX "%s: RX parity error\n", dev->name);
+ netdev_err(dev, "RX parity error\n");
sky2_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), BMU_CLR_IRQ_PAR);
}

if (status & Y2_IS_TCP_TXA1) {
if (net_ratelimit())
- printk(KERN_ERR PFX "%s: TCP segmentation error\n",
- dev->name);
+ netdev_err(dev, "TCP segmentation error\n");
sky2_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), BMU_CLR_IRQ_TCP);
}
}
@@ -2751,8 +2745,7 @@ static void sky2_le_error(struct sky2_hw *hw, unsigned port, u16 q)
struct net_device *dev = hw->dev[port];
u16 idx = sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_GET_IDX));

- dev_err(&hw->pdev->dev, PFX
- "%s: descriptor error q=%#x get=%u put=%u\n",
+ dev_err(&hw->pdev->dev, "%s: descriptor error q=%#x get=%u put=%u\n",
dev->name, (unsigned) q, (unsigned) idx,
(unsigned) sky2_read16(hw, Y2_QADDR(q, PREF_UNIT_PUT_IDX)));

@@ -2777,9 +2770,10 @@ static int sky2_rx_hung(struct net_device *dev)
/* Check if the PCI RX hang */
(fifo_rp == sky2->check.fifo_rp &&
fifo_lev != 0 && fifo_lev >= sky2->check.fifo_lev))) {
- printk(KERN_DEBUG PFX "%s: hung mac %d:%d fifo %d (%d:%d)\n",
- dev->name, mac_lev, mac_rp, fifo_lev, fifo_rp,
- sky2_read8(hw, Q_ADDR(rxq, Q_WP)));
+ netdev_printk(KERN_DEBUG, dev,
+ "hung mac %d:%d fifo %d (%d:%d)\n",
+ mac_lev, mac_rp, fifo_lev,
+ fifo_rp, sky2_read8(hw, Q_ADDR(rxq, Q_WP)));
return 1;
} else {
sky2->check.last = dev->last_rx;
@@ -2810,8 +2804,7 @@ static void sky2_watchdog(unsigned long arg)
/* For chips with Rx FIFO, check if stuck */
if ((hw->flags & SKY2_HW_RAM_BUFFER) &&
sky2_rx_hung(dev)) {
- pr_info(PFX "%s: receiver hang detected\n",
- dev->name);
+ netdev_info(dev, "receiver hang detected\n");
schedule_work(&hw->restart_work);
return;
}
@@ -3253,8 +3246,7 @@ static int sky2_reattach(struct net_device *dev)
if (netif_running(dev)) {
err = sky2_up(dev);
if (err) {
- printk(KERN_INFO PFX "%s: could not restart %d\n",
- dev->name, err);
+ netdev_info(dev, "could not restart %d\n", err);
dev_close(dev);
} else {
netif_device_attach(dev);
@@ -4032,7 +4024,7 @@ static int sky2_vpd_wait(const struct sky2_hw *hw, int cap, u16 busy)
while ( (sky2_pci_read16(hw, cap + PCI_VPD_ADDR) & PCI_VPD_ADDR_F) == busy) {
/* Can take up to 10.6 ms for write */
if (time_after(jiffies, start + HZ/4)) {
- dev_err(&hw->pdev->dev, PFX "VPD cycle timed out");
+ dev_err(&hw->pdev->dev, "VPD cycle timed out\n");
return -ETIMEDOUT;
}
mdelay(1);
@@ -4366,8 +4358,7 @@ static int sky2_device_event(struct notifier_block *unused,

case NETDEV_GOING_DOWN:
if (sky2->debugfs) {
- printk(KERN_DEBUG PFX "%s: remove debugfs\n",
- dev->name);
+ netdev_printk(KERN_DEBUG, dev, "remove debugfs\n");
debugfs_remove(sky2->debugfs);
sky2->debugfs = NULL;
}
@@ -4931,7 +4922,7 @@ static struct pci_driver sky2_driver = {

static int __init sky2_init_module(void)
{
- pr_info(PFX "driver version " DRV_VERSION "\n");
+ pr_info("driver version " DRV_VERSION "\n");

sky2_debug_init();
return pci_register_driver(&sky2_driver);
--
1.7.0.14.g7e948

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/