Re: [PATCH 8/9] PCI / ACPI / PM: Platform support for PCI PME wake-up (rev. 7)

From: Rafael J. Wysocki
Date: Sun Feb 14 2010 - 08:51:09 EST

On Saturday 13 February 2010, Gary Hade wrote:
> On Sat, Feb 13, 2010 at 01:20:29AM +0100, Rafael J. Wysocki wrote:
> > On Friday 12 February 2010, Rafael J. Wysocki wrote:
> > > On Friday 12 February 2010, Gary Hade wrote:
...
> > In fact there are two problems in there. First, the bridge event notification
> > calls handle_bridge_insertion() which attempts to install a PM notifier for
> > the bridge and that deadlocks, because it tries to acquire the mutex
> > recursively. Second, apparently, init_bridge_misc() may be called in the
> > notification code path and it attempts to unregister the notifier and register
> > it again, which can't be done with pci_acpi_notify_mtx held.
> >
> > I guess there are similar problems on the hot remove notification path.
> >
> > Anyway, I have a new version of the patch and I'm going to test it a bit
> > over the weekend. Unfortunately, I don't have hardware with PCI hotplug
> > capability, so I'll send you the new patch for testing on Monday, if you don't
> > mind.
>
> I don't mind.

Thanks!

> Although I am concerned that my acpiphp only
> testing on our IBM System x boxes may not be sufficient to
> assure that PCI hotplug will work well on other PCI hotplug
> capable systems. I hope that others will also do some early
> testing of this code.

The code that you've been testing is not very hardware-dependent. It only
matters whether or not the hardware is capable of PCI hotplugging
(ACPI-based), so your testing should be sufficient.

In fact I have two patches to test. The first one is an ACPI CA patch that
allows us to use more than one system notify handler per device (below).
Please test it on top of [1-3/9] with the replacement for [4-6/9] I sent
you earlier (http://patchwork.kernel.org/patch/78814/) and (updated) [7/9].

If this works, please apply the patch from
http://git.kernel.org/?p=linux/kernel/git/rafael/suspend-2.6.git;a=patch;h=d42c8b334bafe3a15f2dd43e395dafefe58dc588
on top of the appended one and see if things still work correctly.

For convenience the entire patch series to test is located in the
pci-runtime-pm of my suspend-2.6 tree:

git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6.git pci-runtime-pm

I think you can just try it as a whole and go back to individual patches if it
doesn't work.

Thanks,
Rafael

---
From: Rafael J. Wysocki <rjw@xxxxxxx>
Subject: ACPI / ACPICA: Multiple system notify handlers per device

Currently it only is possible to install one system notify handler
per namespace node, but this is not enough for PCI run-time power
management, because we need to install power management notifiers for
devices that already have hotplug notifiers installed. While in
principle this could be handled at the PCI level, that would be
suboptimal due to the way in which the ACPI-based PCI hotplug code is
designed.

For this reason, modify ACPICA so that it is possible to install more
than one system notify handler per namespace node. Namely, make
acpi_install_notify_handler(), acpi_remove_notify_handler() and
acpi_ev_notify_dispatch() use a list of system notify handler objects
associated with a namespace node.

Make acpi_remove_notify_handler() call acpi_os_wait_events_complete()
upfront to avoid a situation in which concurrent instance of
acpi_remove_notify_handler() removes the handler from under us while
we're waiting for the event queues to flush.

Signed-off-by: Rafael J. Wysocki <rjw@xxxxxxx>
---
drivers/acpi/acpica/acobject.h | 2
drivers/acpi/acpica/evmisc.c | 12 ++
drivers/acpi/acpica/evxface.c | 175 ++++++++++++++++++++++++++++++++---------
3 files changed, 150 insertions(+), 39 deletions(-)

Index: linux-2.6/drivers/acpi/acpica/acobject.h
===================================================================
--- linux-2.6.orig/drivers/acpi/acpica/acobject.h
+++ linux-2.6/drivers/acpi/acpica/acobject.h
@@ -287,8 +287,10 @@ struct acpi_object_buffer_field {

struct acpi_object_notify_handler {
ACPI_OBJECT_COMMON_HEADER struct acpi_namespace_node *node; /* Parent device */
+ u32 handler_type;
acpi_notify_handler handler;
void *context;
+ struct acpi_object_notify_handler *next;
};

struct acpi_object_addr_handler {
Index: linux-2.6/drivers/acpi/acpica/evxface.c
===================================================================
--- linux-2.6.orig/drivers/acpi/acpica/evxface.c
+++ linux-2.6/drivers/acpi/acpica/evxface.c
@@ -218,6 +218,72 @@ ACPI_EXPORT_SYMBOL(acpi_remove_fixed_eve

/*******************************************************************************
*
+ * FUNCTION: acpi_populate_handler_object
+ *
+ * PARAMETERS: handler_obj - Handler object to populate
+ * handler_type - The type of handler:
+ * ACPI_SYSTEM_NOTIFY: system_handler (00-7f)
+ * ACPI_DEVICE_NOTIFY: driver_handler (80-ff)
+ * ACPI_ALL_NOTIFY: both system and device
+ * handler - Address of the handler
+ * context - Value passed to the handler on each GPE
+ * next - Address of a handler object to link to
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Populate a handler object.
+ *
+ ******************************************************************************/
+static void
+acpi_populate_handler_object(struct acpi_object_notify_handler *handler_obj,
+ u32 handler_type,
+ acpi_notify_handler handler, void *context,
+ struct acpi_object_notify_handler *next)
+{
+ handler_obj->handler_type = handler_type;
+ handler_obj->handler = handler;
+ handler_obj->context = context;
+ handler_obj->next = next;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_add_handler_object
+ *
+ * PARAMETERS: parent_obj - Parent of the new object
+ * handler - Address of the handler
+ * context - Value passed to the handler on each GPE
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Create a new handler object and populate it.
+ *
+ ******************************************************************************/
+static acpi_status
+acpi_add_handler_object(struct acpi_object_notify_handler *parent_obj,
+ acpi_notify_handler handler, void *context)
+{
+ struct acpi_object_notify_handler *handler_obj;
+
+ /* The parent must not be a defice notify handler object. */
+ if (parent_obj->handler_type & ACPI_DEVICE_NOTIFY)
+ return AE_BAD_PARAMETER;
+
+ handler_obj = ACPI_ALLOCATE_ZEROED(sizeof(*handler_obj));
+ if (!handler_obj)
+ return AE_NO_MEMORY;
+
+ acpi_populate_handler_object(handler_obj,
+ ACPI_SYSTEM_NOTIFY,
+ handler, context,
+ parent_obj->next);
+ parent_obj->next = handler_obj;
+
+ return AE_OK;
+}
+
+/*******************************************************************************
+ *
* FUNCTION: acpi_install_notify_handler
*
* PARAMETERS: Device - The device for which notifies will be handled
@@ -316,15 +382,32 @@ acpi_install_notify_handler(acpi_handle
obj_desc = acpi_ns_get_attached_object(node);
if (obj_desc) {

- /* Object exists - make sure there's no handler */
+ /* Object exists. */

- if (((handler_type & ACPI_SYSTEM_NOTIFY) &&
- obj_desc->common_notify.system_notify) ||
- ((handler_type & ACPI_DEVICE_NOTIFY) &&
- obj_desc->common_notify.device_notify)) {
+ /* For a device notify, make sure there's no handler. */
+ if ((handler_type & ACPI_DEVICE_NOTIFY) &&
+ obj_desc->common_notify.device_notify) {
status = AE_ALREADY_EXISTS;
goto unlock_and_exit;
}
+
+ /* System notifies may have more handlers installed. */
+ notify_obj = obj_desc->common_notify.system_notify;
+
+ if ((handler_type & ACPI_SYSTEM_NOTIFY) && notify_obj) {
+ struct acpi_object_notify_handler *parent_obj;
+
+ if (handler_type & ACPI_DEVICE_NOTIFY) {
+ status = AE_ALREADY_EXISTS;
+ goto unlock_and_exit;
+ }
+
+ parent_obj = &notify_obj->notify;
+ status = acpi_add_handler_object(parent_obj,
+ handler,
+ context);
+ goto unlock_and_exit;
+ }
} else {
/* Create a new object */

@@ -356,9 +439,10 @@ acpi_install_notify_handler(acpi_handle
goto unlock_and_exit;
}

- notify_obj->notify.node = node;
- notify_obj->notify.handler = handler;
- notify_obj->notify.context = context;
+ acpi_populate_handler_object(&notify_obj->notify,
+ handler_type,
+ handler, context,
+ NULL);

if (handler_type & ACPI_SYSTEM_NOTIFY) {
obj_desc->common_notify.system_notify = notify_obj;
@@ -418,6 +502,10 @@ acpi_remove_notify_handler(acpi_handle d
goto exit;
}

+
+ /* Make sure all deferred tasks are completed */
+ acpi_os_wait_events_complete(NULL);
+
status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
goto exit;
@@ -445,15 +533,6 @@ acpi_remove_notify_handler(acpi_handle d
goto unlock_and_exit;
}

- /* Make sure all deferred tasks are completed */
-
- (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
- acpi_os_wait_events_complete(NULL);
- status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
- if (ACPI_FAILURE(status)) {
- goto exit;
- }
-
if (handler_type & ACPI_SYSTEM_NOTIFY) {
acpi_gbl_system_notify.node = NULL;
acpi_gbl_system_notify.handler = NULL;
@@ -488,28 +567,60 @@ acpi_remove_notify_handler(acpi_handle d
/* Object exists - make sure there's an existing handler */

if (handler_type & ACPI_SYSTEM_NOTIFY) {
+ struct acpi_object_notify_handler *handler_obj;
+ struct acpi_object_notify_handler *parent_obj;
+
notify_obj = obj_desc->common_notify.system_notify;
if (!notify_obj) {
status = AE_NOT_EXIST;
goto unlock_and_exit;
}

- if (notify_obj->notify.handler != handler) {
+ handler_obj = &notify_obj->notify;
+ parent_obj = NULL;
+ while (handler_obj->handler != handler) {
+ if (handler_obj->next) {
+ parent_obj = handler_obj;
+ handler_obj = handler_obj->next;
+ } else {
+ break;
+ }
+ }
+
+ if (handler_obj->handler != handler) {
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
- /* Make sure all deferred tasks are completed */

- (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
- acpi_os_wait_events_complete(NULL);
- status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
- if (ACPI_FAILURE(status)) {
- goto exit;
+ /*
+ * Remove the handler. There are three possible cases.
+ * First, we may need to remove a non-embedded object.
+ * Second, we may need to remove the embedded object's
+ * handler data, while non-embedded objects exist.
+ * Finally, we may need to remove the embedded object
+ * entirely along with its container.
+ */
+ if (parent_obj) {
+ /* Non-embedded object is being removed. */
+ parent_obj->next = handler_obj->next;
+ ACPI_FREE(handler_obj);
+ } else if (notify_obj->notify.next) {
+ /*
+ * The handler matches the embedded object, but
+ * there are more handler objects in the list.
+ * Replace the embedded object's data with the
+ * first next object's data and remove that
+ * object.
+ */
+ parent_obj = &notify_obj->notify;
+ handler_obj = notify_obj->notify.next;
+ *parent_obj = *handler_obj;
+ ACPI_FREE(handler_obj);
+ } else {
+ /* No more handler objects in the list. */
+ obj_desc->common_notify.system_notify = NULL;
+ acpi_ut_remove_reference(notify_obj);
}
-
- /* Remove the handler */
- obj_desc->common_notify.system_notify = NULL;
- acpi_ut_remove_reference(notify_obj);
}

if (handler_type & ACPI_DEVICE_NOTIFY) {
@@ -523,14 +634,6 @@ acpi_remove_notify_handler(acpi_handle d
status = AE_BAD_PARAMETER;
goto unlock_and_exit;
}
- /* Make sure all deferred tasks are completed */
-
- (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
- acpi_os_wait_events_complete(NULL);
- status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
- if (ACPI_FAILURE(status)) {
- goto exit;
- }

/* Remove the handler */
obj_desc->common_notify.device_notify = NULL;
Index: linux-2.6/drivers/acpi/acpica/evmisc.c
===================================================================
--- linux-2.6.orig/drivers/acpi/acpica/evmisc.c
+++ linux-2.6/drivers/acpi/acpica/evmisc.c
@@ -259,9 +259,15 @@ static void ACPI_SYSTEM_XFACE acpi_ev_no

handler_obj = notify_info->notify.handler_obj;
if (handler_obj) {
- handler_obj->notify.handler(notify_info->notify.node,
- notify_info->notify.value,
- handler_obj->notify.context);
+ struct acpi_object_notify_handler *notifier;
+
+ notifier = &handler_obj->notify;
+ while (notifier) {
+ notifier->handler(notify_info->notify.node,
+ notify_info->notify.value,
+ notifier->context);
+ notifier = notifier->next;
+ }
}

/* All done with the info object */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/