[PATCH 01/39] KVM: PPC: Enable lightweight exits again
From: Avi Kivity
Date: Sat Feb 13 2010 - 03:02:59 EST
From: Alexander Graf <agraf@xxxxxxx>
The PowerPC C ABI defines that registers r14-r31 need to be preserved across
function calls. Since our exit handler is written in C, we can make use of that
and don't need to reload r14-r31 on every entry/exit cycle.
This technique is also used in the BookE code and is called "lightweight exits"
there. To follow the tradition, it's called the same in Book3S.
So far this optimization was disabled though, as the code didn't do what it was
expected to do, but failed to work.
This patch fixes and enables lightweight exits again.
Signed-off-by: Alexander Graf <agraf@xxxxxxx>
Signed-off-by: Marcelo Tosatti <mtosatti@xxxxxxxxxx>
---
arch/powerpc/kvm/book3s.c | 4 +-
arch/powerpc/kvm/book3s_64_interrupts.S | 106 ++++++++++++++++---------------
2 files changed, 57 insertions(+), 53 deletions(-)
diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 492dcc1..fd2a4d5 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -539,8 +539,6 @@ int kvmppc_handle_pagefault(struct kvm_run *run, struct kvm_vcpu *vcpu,
r = kvmppc_emulate_mmio(run, vcpu);
if ( r == RESUME_HOST_NV )
r = RESUME_HOST;
- if ( r == RESUME_GUEST_NV )
- r = RESUME_GUEST;
}
return r;
@@ -645,7 +643,7 @@ int kvmppc_handle_exit(struct kvm_run *run, struct kvm_vcpu *vcpu,
er = kvmppc_emulate_instruction(run, vcpu);
switch (er) {
case EMULATE_DONE:
- r = RESUME_GUEST;
+ r = RESUME_GUEST_NV;
break;
case EMULATE_FAIL:
printk(KERN_CRIT "%s: emulation at %lx failed (%08x)\n",
diff --git a/arch/powerpc/kvm/book3s_64_interrupts.S b/arch/powerpc/kvm/book3s_64_interrupts.S
index 7b55d80..d95d0d9 100644
--- a/arch/powerpc/kvm/book3s_64_interrupts.S
+++ b/arch/powerpc/kvm/book3s_64_interrupts.S
@@ -40,6 +40,26 @@
mtmsrd r0,1
.endm
+#define VCPU_LOAD_NVGPRS(vcpu) \
+ ld r14, VCPU_GPR(r14)(vcpu); \
+ ld r15, VCPU_GPR(r15)(vcpu); \
+ ld r16, VCPU_GPR(r16)(vcpu); \
+ ld r17, VCPU_GPR(r17)(vcpu); \
+ ld r18, VCPU_GPR(r18)(vcpu); \
+ ld r19, VCPU_GPR(r19)(vcpu); \
+ ld r20, VCPU_GPR(r20)(vcpu); \
+ ld r21, VCPU_GPR(r21)(vcpu); \
+ ld r22, VCPU_GPR(r22)(vcpu); \
+ ld r23, VCPU_GPR(r23)(vcpu); \
+ ld r24, VCPU_GPR(r24)(vcpu); \
+ ld r25, VCPU_GPR(r25)(vcpu); \
+ ld r26, VCPU_GPR(r26)(vcpu); \
+ ld r27, VCPU_GPR(r27)(vcpu); \
+ ld r28, VCPU_GPR(r28)(vcpu); \
+ ld r29, VCPU_GPR(r29)(vcpu); \
+ ld r30, VCPU_GPR(r30)(vcpu); \
+ ld r31, VCPU_GPR(r31)(vcpu); \
+
/*****************************************************************************
* *
* Guest entry / exit code that is in kernel module memory (highmem) *
@@ -67,12 +87,16 @@ kvm_start_entry:
SAVE_NVGPRS(r1)
/* Save LR */
- mflr r14
- std r14, _LINK(r1)
+ std r0, _LINK(r1)
+
+ /* Load non-volatile guest state from the vcpu */
+ VCPU_LOAD_NVGPRS(r4)
-/* XXX optimize non-volatile loading away */
kvm_start_lightweight:
+ ld r9, VCPU_PC(r4) /* r9 = vcpu->arch.pc */
+ ld r10, VCPU_SHADOW_MSR(r4) /* r10 = vcpu->arch.shadow_msr */
+
DISABLE_INTERRUPTS
/* Save R1/R2 in the PACA */
@@ -81,29 +105,6 @@ kvm_start_lightweight:
ld r3, VCPU_HIGHMEM_HANDLER(r4)
std r3, PACASAVEDMSR(r13)
- /* Load non-volatile guest state from the vcpu */
- ld r14, VCPU_GPR(r14)(r4)
- ld r15, VCPU_GPR(r15)(r4)
- ld r16, VCPU_GPR(r16)(r4)
- ld r17, VCPU_GPR(r17)(r4)
- ld r18, VCPU_GPR(r18)(r4)
- ld r19, VCPU_GPR(r19)(r4)
- ld r20, VCPU_GPR(r20)(r4)
- ld r21, VCPU_GPR(r21)(r4)
- ld r22, VCPU_GPR(r22)(r4)
- ld r23, VCPU_GPR(r23)(r4)
- ld r24, VCPU_GPR(r24)(r4)
- ld r25, VCPU_GPR(r25)(r4)
- ld r26, VCPU_GPR(r26)(r4)
- ld r27, VCPU_GPR(r27)(r4)
- ld r28, VCPU_GPR(r28)(r4)
- ld r29, VCPU_GPR(r29)(r4)
- ld r30, VCPU_GPR(r30)(r4)
- ld r31, VCPU_GPR(r31)(r4)
-
- ld r9, VCPU_PC(r4) /* r9 = vcpu->arch.pc */
- ld r10, VCPU_SHADOW_MSR(r4) /* r10 = vcpu->arch.shadow_msr */
-
ld r3, VCPU_TRAMPOLINE_ENTER(r4)
mtsrr0 r3
@@ -247,7 +248,6 @@ kvmppc_handler_highmem:
no_dcbz32_off:
- /* XXX maybe skip on lightweight? */
std r14, VCPU_GPR(r14)(r12)
std r15, VCPU_GPR(r15)(r12)
std r16, VCPU_GPR(r16)(r12)
@@ -267,9 +267,6 @@ no_dcbz32_off:
std r30, VCPU_GPR(r30)(r12)
std r31, VCPU_GPR(r31)(r12)
- /* Restore non-volatile host registers (r14 - r31) */
- REST_NVGPRS(r1)
-
/* Save guest PC (R10) */
std r10, VCPU_PC(r12)
@@ -351,42 +348,51 @@ kvm_return_point:
/* Jump back to lightweight entry if we're supposed to */
/* go back into the guest */
+
+ /* Pass the exit number as 3rd argument to kvmppc_handle_exit */
mr r5, r3
+
/* Restore r3 (kvm_run) and r4 (vcpu) */
REST_2GPRS(3, r1)
bl KVMPPC_HANDLE_EXIT
-#if 0 /* XXX get lightweight exits back */
+ /* If RESUME_GUEST, get back in the loop */
cmpwi r3, RESUME_GUEST
- bne kvm_exit_heavyweight
+ beq kvm_loop_lightweight
- /* put VCPU and KVM_RUN back into place and roll again! */
- REST_2GPRS(3, r1)
- b kvm_start_lightweight
+ cmpwi r3, RESUME_GUEST_NV
+ beq kvm_loop_heavyweight
-kvm_exit_heavyweight:
- /* Restore non-volatile host registers */
- ld r14, _LINK(r1)
- mtlr r14
- REST_NVGPRS(r1)
+kvm_exit_loop:
- addi r1, r1, SWITCH_FRAME_SIZE
-#else
ld r4, _LINK(r1)
mtlr r4
- cmpwi r3, RESUME_GUEST
- bne kvm_exit_heavyweight
+ /* Restore non-volatile host registers (r14 - r31) */
+ REST_NVGPRS(r1)
+
+ addi r1, r1, SWITCH_FRAME_SIZE
+ blr
+
+kvm_loop_heavyweight:
+ ld r4, _LINK(r1)
+ std r4, (16 + SWITCH_FRAME_SIZE)(r1)
+
+ /* Load vcpu and cpu_run */
REST_2GPRS(3, r1)
- addi r1, r1, SWITCH_FRAME_SIZE
+ /* Load non-volatile guest state from the vcpu */
+ VCPU_LOAD_NVGPRS(r4)
- b kvm_start_entry
+ /* Jump back into the beginning of this function */
+ b kvm_start_lightweight
-kvm_exit_heavyweight:
+kvm_loop_lightweight:
- addi r1, r1, SWITCH_FRAME_SIZE
-#endif
+ /* We'll need the vcpu pointer */
+ REST_GPR(4, r1)
+
+ /* Jump back into the beginning of this function */
+ b kvm_start_lightweight
- blr
--
1.6.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/