Re: usbhid control queue full, due to stuck control request

From: David Fries
Date: Thu Feb 11 2010 - 20:03:53 EST


From: Oliver Neukum <oliver@xxxxxxxxxx>

Some devices do not react to a control request (seen on APC UPS's)
resulting in a slow stream of messages,
"generic-usb ... control queue full".
Therefore request need a timeout.

Signed-off-by: Oliver Neukum <oliver@xxxxxxxxxx>
Duplicated the change from last_out to last_ctrl and verified.
Signed-off-by: David Fries <david@xxxxxxxxx>
---

Oliver Neukum, this is based on your patch, do you agree with the
changes?

One possible problem with this fix is it drops the stalled URB
transfer. That might pose a problem for one shot messages, possibly
hid_ctrl and hid_irq_out could resubmit the same urb when -ECONNRESET
is received, assuming the message content wasn't the reason it
timedout in the first place.
David Fries <david@xxxxxxxxx>

drivers/hid/usbhid/hid-core.c | 28 ++++++++++++++++++++++++++--
drivers/hid/usbhid/usbhid.h | 2 ++
2 files changed, 28 insertions(+), 2 deletions(-)

diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 3c1fcb7..076a29a 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -318,6 +318,7 @@ static int hid_submit_out(struct hid_device *hid)
err_hid("usb_submit_urb(out) failed");
return -1;
}
+ usbhid->last_out = jiffies;
} else {
/*
* queue work to wake up the device.
@@ -379,6 +380,7 @@ static int hid_submit_ctrl(struct hid_device *hid)
err_hid("usb_submit_urb(ctrl) failed");
return -1;
}
+ usbhid->last_ctrl = jiffies;
} else {
/*
* queue work to wake up the device.
@@ -513,9 +515,20 @@ void __usbhid_submit_report(struct hid_device *hid, struct hid_report *report, u
usbhid->out[usbhid->outhead].report = report;
usbhid->outhead = head;

- if (!test_and_set_bit(HID_OUT_RUNNING, &usbhid->iofl))
+ if (!test_and_set_bit(HID_OUT_RUNNING, &usbhid->iofl)) {
if (hid_submit_out(hid))
clear_bit(HID_OUT_RUNNING, &usbhid->iofl);
+ } else {
+ /*
+ * the queue is known to run
+ * but an earlier request may be stuck
+ * we may need to time out
+ * no race because this is called under
+ * spinlock
+ */
+ if (time_after(jiffies, usbhid->last_out + HZ * 5))
+ usb_unlink_urb(usbhid->urbout);
+ }
return;
}

@@ -536,9 +549,20 @@ void __usbhid_submit_report(struct hid_device *hid, struct hid_report *report, u
usbhid->ctrl[usbhid->ctrlhead].dir = dir;
usbhid->ctrlhead = head;

- if (!test_and_set_bit(HID_CTRL_RUNNING, &usbhid->iofl))
+ if (!test_and_set_bit(HID_CTRL_RUNNING, &usbhid->iofl)) {
if (hid_submit_ctrl(hid))
clear_bit(HID_CTRL_RUNNING, &usbhid->iofl);
+ } else {
+ /*
+ * the queue is known to run
+ * but an earlier request may be stuck
+ * we may need to time out
+ * no race because this is called under
+ * spinlock
+ */
+ if (time_after(jiffies, usbhid->last_ctrl + HZ * 5))
+ usb_unlink_urb(usbhid->urbctrl);
+ }
}

void usbhid_submit_report(struct hid_device *hid, struct hid_report *report, unsigned char dir)
diff --git a/drivers/hid/usbhid/usbhid.h b/drivers/hid/usbhid/usbhid.h
index 08f505c..ec20400 100644
--- a/drivers/hid/usbhid/usbhid.h
+++ b/drivers/hid/usbhid/usbhid.h
@@ -80,12 +80,14 @@ struct usbhid_device {
unsigned char ctrlhead, ctrltail; /* Control fifo head & tail */
char *ctrlbuf; /* Control buffer */
dma_addr_t ctrlbuf_dma; /* Control buffer dma */
+ unsigned long last_ctrl; /* record of last output for timeouts */

struct urb *urbout; /* Output URB */
struct hid_output_fifo out[HID_CONTROL_FIFO_SIZE]; /* Output pipe fifo */
unsigned char outhead, outtail; /* Output pipe fifo head & tail */
char *outbuf; /* Output buffer */
dma_addr_t outbuf_dma; /* Output buffer dma */
+ unsigned long last_out; /* record of last output for timeouts */

spinlock_t lock; /* fifo spinlock */
unsigned long iofl; /* I/O flags (CTRL_RUNNING, OUT_RUNNING) */
--
1.5.6.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/