Re: No PCI-X / PCI-E cards ...

[Xavier Bestel]

On Fri, 2009-12-18 at 16:26 +0100, Krzysztof Halasa wrote:
> Xavier Bestel <xavier.bestel@xxxxxxx> writes:
> 
> >> I first plugged a wifi PCI card into a PCI-X slot (there's no PCI slot),
> >> it didn't appear in lspci. As I thought it was a voltage problem (PCI-X
> >> only accept 3.3v, not 5v IIRC)
> 
> The card has to force 33 MHz non-PCI-X mode. I'd check if the "pins" 38B
> (PCIXCAP) and 49B (M66EN) are both connected to GND. Also you can try
> inserting another PCI card into another PCI-X slot (in the same bus
> segment), this may force 33 PCI mode (check if the other card is
> detected).

BTW, when I try 2 PCI cards in both PCI-X slots, the machine doesn't
start (it stays in soft-off state).

	Xav



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/