Re: 2.6.32.2 SATA link detect failed, 2.6.32.1 works fine

[Robert Hancock]

On Mon, Dec 21, 2009 at 7:02 PM, fengxiangjun <fengxiangjun@xxxxxxxxxxx> wrote:
>
> Yeah, running 2.6.32.1 now, no problem.
>
> dmesg shows:
>
> ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>
> When booting 2.6.32.2 with the same config, I get
>
> ata1.00: SATA link down (SStatus 0 SControl 301)
>
> Weird.

CCing linux-ide and Tejun. Could be some kind of timing difference
triggering the problem, perhaps?

>
> On Mon, 21 Dec 2009, Robert Hancock wrote:
>
>> On 12/21/2009 05:12 AM, fengxiangjun wrote:
>> >
>> > Hi,
>> >
>> > after upgrading to 2.6.32.2,
>> > with the attached config,
>> > kernel booting always(just tried 10+ times) failed at:
>> >
>> > ata1.00: SATA link down (SStatus 0 SControl 301)
>> > ...
>> > VFS: Cannot open root device ...
>>
>> There were no libata changes in 2.6.32.2 that should have affected this. Are
>> you sure the .config is unchanged? Have you rechecked that 2.6.31.1 still
>> works?
>>
> ---------------------------------------------------------------------------------------------------
> Confidentiality Notice: The information contained in this e-mail and any accompanying attachment(s)
> is intended only for the use of the intended recipient and may be confidential and/or privileged of
> Neusoft Corporation, its subsidiaries and/or its affiliates. If any reader of this communication is
> not the intended recipient, unauthorized use, forwarding, printing,  storing, disclosure or copying
> is strictly prohibited, and may be unlawful.If you have received this communication in error,please
> immediately notify the sender by return e-mail, and delete the original message and all copies from
> your system. Thank you.
> ---------------------------------------------------------------------------------------------------
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/