Re: [PATCH] ARM: Add spi controller driver support for NUC900

[Wan ZongShun]

2009/11/19 Russell King - ARM Linux <linux@xxxxxxxxxxxxxxxx>:
> On Thu, Nov 19, 2009 at 04:40:50PM +0800, Wan ZongShun wrote:
>> 2009/11/19 Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>:
>> > I don't know, because I don't know what operation the hardware needs to
>> > stop it from generating interrupts. ÂPerhaps that's clk_disable()?
>>
>> The interrupt will be not occur as long as I run clk_disable().
>>
>> > Once you've stopped the source of interrupts then the code should wait
>> > for the IRQ handler to complete if it's running on another CPU. ÂYes,
>> > free_irq() does that.
>>
>> So, regarding my system of single CPU, maybe I need put this
>> 'clk_disable()' in the front of function of w90p910_spi_remove().
>>
>> right?
>
> Depending on the hardware, that's not the right answer. ÂIf turning off
> the clock also causes register accesses to the device to abort, it is
> a very dangerous thing to do.
>
> It can also be dangerous if the clock is used to synchronise the interrupt
> output - it can lead to the output being permanently asserted if the clock
> is turned off with it asserted.
>
> Normally devices have an "interrupt enable" register. ÂYou should disable
> all interrupts from the device using this register after unregistering
> the driver from the (SPI) subsystem.

sir, so I need implement a API to disable spi device interrupt by
"interrupt enable" register?
but I did not find the operation in other ARM platform when they close
your spi driver.

or something I missed?

>



-- 
linux-arm-kernel mailing list
linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/