[PATCH v2] [RFC] NEXIO (or iNexio) support for usbtouchscreen
From: Ondrej Zary
Date: Wed Nov 18 2009 - 07:18:57 EST
On Tuesday 17 November 2009, Oliver Neukum wrote:
> Am Montag, 16. November 2009 15:14:59 schrieb Ondrej Zary:
>
> Hi,
>
> firstly can you please send patches with -up? It makes them more readable.
>
> > ---
> >
> > @@ -92,7 +95,7 @@
> > dma_addr_t data_dma;
> > unsigned char *buffer;
> > int buf_len;
> > - struct urb *irq;
> > + struct urb *irq, *ack;
>
> Where is this urb handled in case of disconnection?
See the new patch below.
> > +#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
> > + /* ignore the comm interface */
> > + {USB_DEVICE_AND_INTERFACE_INFO(0x10f0, 0x2002, 0x02, 0x02, 0x00),
> > + .driver_info = DEVTYPE_IGNORE},
> > + {USB_DEVICE_AND_INTERFACE_INFO(0x1870, 0x0001, 0x02, 0x02, 0x00),
> > + .driver_info = DEVTYPE_IGNORE},
> > + /* normal device IDs */
> > + {USB_DEVICE(0x10f0, 0x2002), .driver_info = DEVTYPE_NEXIO},
> > + {USB_DEVICE(0x1870, 0x0001), .driver_info = DEVTYPE_NEXIO},
>
> Why not go for the interfaces you want?
See the new patch below.
> > +static unsigned char nexio_ack[2] = { 0xaa, 0x02 };
> > +
> > +static int nexio_init(struct usbtouch_usb *usbtouch)
> > +{
> > + struct usb_device *dev = usbtouch->udev;
> > + int ret = -ENOMEM;
> > + int actual_len;
> > + unsigned char *buf;
> > + unsigned char init[4] = { 0x82, 0x04, 0x0a, 0x0f };
> > + char *firmware_ver;
> > +
> > + buf = kmalloc(NEXIO_BUFSIZE, GFP_KERNEL);
> > + if (!buf)
> > + goto err_nobuf;
> > + /* two reads */
> > + ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, NEXIO_INPUT_EP), buf,
> > + NEXIO_BUFSIZE, &actual_len, NEXIO_TIMEOUT);
> > + if (ret < 0)
> > + goto err_out;
> > + ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, NEXIO_INPUT_EP), buf,
> > + NEXIO_BUFSIZE, &actual_len, NEXIO_TIMEOUT);
> > + if (ret < 0)
> > + goto err_out;
> > + /* send init command */
> > + ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, NEXIO_OUTPUT_EP), init,
> > + sizeof(init), &actual_len, NEXIO_TIMEOUT);
>
> DMA on the kernel stack
I don't know any details about this - what's the correct way to do this?
I tried moving the init[] array outside the function but that didn't work at
all - compiled fine but device was not reporting the name firmware version.
I ended up with copying it to that kmalloced buf.
I'm worried about nexio_ack - that shouldn't work too then. Maybe it really
does not and the device does not care.
I also found another problem: when I disconnect the USB cable, kernel oopses:
BUG: unable to handle kernel NULL pointer dereference
IP: [<f7c794fa>] start_unlink_async+0x63/0xfc
Call Trace:
ehci_urb_dequeue+0x7c/0x11a [ehci_hcd]
unlink1+0xaa/0xc7 [usbcore]
usb_hcd_unlink_urb+0x57/0x84 [usbcore]
usb_kill_urb+0x40/0xbe [usbcore]
default_wake_function+0x0/0x2b
usb_start_wait_urb+0x6e/0xb0 [usbcore]
usb_control_msg+0x10a/0x136 [usbcore]
hub_port_status+0x77/0xf7 [usbcore]
hub_thread+0x56d/0xe14 [usbcore]
autoremove_wake_function+0x0/0x4f
hub_thread+0x0/0xe14 [usbcore]
kthread+0x7a/0x7f
kthread+0x0/0x7f
Are there any other problems with my code that can cause this oops?
--- linux-source-2.6.31/drivers/input/touchscreen/usbtouchscreen.c.orig 2009-09-10 00:13:59.000000000 +0200
+++ linux-source-2.6.31/drivers/input/touchscreen/usbtouchscreen.c 2009-11-18 12:32:19.000000000 +0100
@@ -13,6 +13,7 @@
* - IdealTEK URTC1000
* - General Touch
* - GoTop Super_Q2/GogoPen/PenPower tablets
+ * - NEXIO/iNexio
*
* Copyright (C) 2004-2007 by Daniel Ritz <daniel.ritz@xxxxxx>
* Copyright (C) by Todd E. Johnson (mtouchusb.c)
@@ -71,6 +72,8 @@ struct usbtouch_device_info {
int min_yc, max_yc;
int min_press, max_press;
int rept_size;
+ bool no_urb_in_open;
+ int endpoint, interval;
void (*process_pkt) (struct usbtouch_usb *usbtouch, unsigned char *pkt, int len);
@@ -92,7 +95,7 @@ struct usbtouch_usb {
dma_addr_t data_dma;
unsigned char *buffer;
int buf_len;
- struct urb *irq;
+ struct urb *irq, *ack;
struct usb_device *udev;
struct input_dev *input;
struct usbtouch_device_info *type;
@@ -118,6 +121,7 @@ enum {
DEVTYPE_IDEALTEK,
DEVTYPE_GENERAL_TOUCH,
DEVTYPE_GOTOP,
+ DEVTYPE_NEXIO,
};
#define USB_DEVICE_HID_CLASS(vend, prod) \
@@ -191,6 +195,14 @@ static struct usb_device_id usbtouch_dev
{USB_DEVICE(0x08f2, 0x00f4), .driver_info = DEVTYPE_GOTOP},
#endif
+#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
+ /* data interface only */
+ {USB_DEVICE_AND_INTERFACE_INFO(0x10f0, 0x2002, 0x0a, 0x00, 0x00),
+ .driver_info = DEVTYPE_NEXIO},
+ {USB_DEVICE_AND_INTERFACE_INFO(0x1870, 0x0001, 0x0a, 0x00, 0x00),
+ .driver_info = DEVTYPE_NEXIO},
+#endif
+
{}
};
@@ -563,6 +575,170 @@ static int gotop_read_data(struct usbtou
}
#endif
+/*****************************************************************************
+ * NEXIO Part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
+
+#define NEXIO_OUTPUT_EP 0x01
+#define NEXIO_INPUT_EP 0x82
+#define NEXIO_TIMEOUT 5000
+#define NEXIO_BUFSIZE 1024
+#define NEXIO_THRESHOLD 50
+
+struct nexio_touch_packet {
+ u8 flags; /* 0xe1 = touch, 0xe1 = release */
+ __be16 data_len; /* total bytes of touch data */
+ __be16 x_len; /* bytes for X axis */
+ __be16 y_len; /* bytes for Y axis */
+ u8 data[];
+} __attribute__ ((packed));
+
+static unsigned char nexio_ack_pkt[2] = { 0xaa, 0x02 };
+static unsigned char nexio_init_pkt[4] = { 0x82, 0x04, 0x0a, 0x0f };
+
+static int nexio_init(struct usbtouch_usb *usbtouch)
+{
+ struct usb_device *dev = usbtouch->udev;
+ int ret = -ENOMEM;
+ int actual_len;
+ unsigned char *buf;
+ char *firmware_ver;
+
+ buf = kmalloc(NEXIO_BUFSIZE, GFP_KERNEL);
+ if (!buf)
+ goto err_nobuf;
+ /* two reads */
+ ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, NEXIO_INPUT_EP), buf,
+ NEXIO_BUFSIZE, &actual_len, NEXIO_TIMEOUT);
+ if (ret < 0)
+ goto err_out;
+ ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, NEXIO_INPUT_EP), buf,
+ NEXIO_BUFSIZE, &actual_len, NEXIO_TIMEOUT);
+ if (ret < 0)
+ goto err_out;
+ /* send init command */
+ memcpy(buf, nexio_init_pkt, sizeof(nexio_init_pkt));
+ ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, NEXIO_OUTPUT_EP),
+ buf, sizeof(nexio_init_pkt), &actual_len,
+ NEXIO_TIMEOUT);
+ if (ret < 0)
+ goto err_out;
+ /* read it back */
+ ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, NEXIO_INPUT_EP), buf,
+ NEXIO_BUFSIZE, &actual_len, NEXIO_TIMEOUT);
+ if (ret < 0)
+ goto err_out;
+ /* read firmware version */
+ ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, NEXIO_INPUT_EP), buf,
+ NEXIO_BUFSIZE, &actual_len, NEXIO_TIMEOUT);
+ if (ret < 0)
+ goto err_out;
+ buf[buf[1]] = 0; /* second byte is data(string) length */
+ firmware_ver = kstrdup(&buf[2], GFP_KERNEL);
+ /* read device name */
+ ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, NEXIO_INPUT_EP), buf,
+ NEXIO_BUFSIZE, &actual_len, NEXIO_TIMEOUT);
+ if (ret < 0) {
+ kfree(firmware_ver);
+ goto err_out;
+ }
+ buf[buf[1]] = 0;
+ printk(KERN_INFO "Nexio device: %s, firmware version %s\n",
+ &buf[2], firmware_ver);
+ kfree(firmware_ver);
+
+ /* prepare ACK URB */
+ usbtouch->ack = usb_alloc_urb(0, GFP_KERNEL);
+ if (!usbtouch->ack) {
+ dbg("%s - usb_alloc_urb failed: ack_urb", __func__);
+ return 0;
+ }
+ usb_fill_bulk_urb(usbtouch->ack, usbtouch->udev,
+ usb_sndbulkpipe(usbtouch->udev, NEXIO_OUTPUT_EP),
+ nexio_ack_pkt, sizeof(nexio_ack_pkt), NULL,
+ usbtouch);
+ /* submit first IRQ URB */
+ ret = usb_submit_urb(usbtouch->irq, GFP_KERNEL);
+err_out:
+ kfree(buf);
+err_nobuf:
+ return ret;
+}
+
+static int nexio_read_data(struct usbtouch_usb *usbtouch, unsigned char *pkt)
+{
+ int x, y, begin_x, begin_y, end_x, end_y, w, h, ret;
+ struct nexio_touch_packet *packet = (void *) pkt;
+
+ /* got touch data? */
+ if ((pkt[0] & 0xe0) != 0xe0)
+ return 0;
+
+ /* send ACK */
+ ret = usb_submit_urb(usbtouch->ack, GFP_KERNEL);
+
+ if (!usbtouch->type->max_xc) {
+ usbtouch->type->max_xc = 2 * be16_to_cpu(packet->x_len);
+ input_set_abs_params(usbtouch->input, ABS_X, 0,
+ 2 * be16_to_cpu(packet->x_len), 0, 0);
+ usbtouch->type->max_yc = 2 * be16_to_cpu(packet->y_len);
+ input_set_abs_params(usbtouch->input, ABS_Y, 0,
+ 2 * be16_to_cpu(packet->y_len), 0, 0);
+ }
+ /* The device reports state of IR sensors on X and Y axes.
+ * Each byte represents "darkness" percentage (0-100) of one element.
+ * 17" touchscreen reports only 64 x 52 bytes so the resolution is low.
+ * This also means that there's a limited multi-touch capability but
+ * it's disabled (and untested) here as there's no X driver for that.
+ */
+ begin_x = end_x = begin_y = end_y = -1;
+ for (x = 0; x < be16_to_cpu(packet->x_len); x++) {
+ if (begin_x == -1 && packet->data[x] > NEXIO_THRESHOLD) {
+ begin_x = x;
+ continue;
+ }
+ if (end_x == -1 && begin_x != -1 && packet->data[x] < NEXIO_THRESHOLD) {
+ end_x = x - 1;
+ for (y = be16_to_cpu(packet->x_len);
+ y < be16_to_cpu(packet->data_len); y++) {
+ if (begin_y == -1 && packet->data[y] > NEXIO_THRESHOLD) {
+ begin_y = y - be16_to_cpu(packet->x_len);
+ continue;
+ }
+ if (end_y == -1 &&
+ begin_y != -1 && packet->data[y] < NEXIO_THRESHOLD) {
+ end_y = y - 1 - be16_to_cpu(packet->x_len);
+ w = end_x - begin_x;
+ h = end_y - begin_y;
+ /* multi-touch */
+/* input_report_abs(usbtouch->input,
+ ABS_MT_TOUCH_MAJOR, max(w,h));
+ input_report_abs(usbtouch->input,
+ ABS_MT_TOUCH_MINOR, min(x,h));
+ input_report_abs(usbtouch->input,
+ ABS_MT_POSITION_X, 2*begin_x+w);
+ input_report_abs(usbtouch->input,
+ ABS_MT_POSITION_Y, 2*begin_y+h);
+ input_report_abs(usbtouch->input,
+ ABS_MT_ORIENTATION, w > h);
+ input_mt_sync(usbtouch->input);*/
+ /* single touch */
+ usbtouch->x = 2 * begin_x + w;
+ usbtouch->y = 2 * begin_y + h;
+ usbtouch->touch = packet->flags & 0x01;
+ begin_y = end_y = -1;
+ return 1;
+ }
+ }
+ begin_x = end_x = -1;
+ }
+
+ }
+ return 0;
+}
+#endif
+
/*****************************************************************************
* the different device descriptors
@@ -702,6 +878,17 @@ static struct usbtouch_device_info usbto
.read_data = gotop_read_data,
},
#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
+ [DEVTYPE_NEXIO] = {
+ .rept_size = 128,
+ .no_urb_in_open = 1,
+ .endpoint = NEXIO_INPUT_EP,
+ .interval = 0xff,
+ .read_data = nexio_read_data,
+ .init = nexio_init,
+ },
+#endif
};
@@ -852,8 +1039,9 @@ static int usbtouch_open(struct input_de
usbtouch->irq->dev = usbtouch->udev;
- if (usb_submit_urb(usbtouch->irq, GFP_KERNEL))
- return -EIO;
+ if (!usbtouch->type->no_urb_in_open)
+ if (usb_submit_urb(usbtouch->irq, GFP_KERNEL))
+ return -EIO;
return 0;
}
@@ -862,7 +1050,8 @@ static void usbtouch_close(struct input_
{
struct usbtouch_usb *usbtouch = input_get_drvdata(input);
- usb_kill_urb(usbtouch->irq);
+ if (!usbtouch->type->no_urb_in_open)
+ usb_kill_urb(usbtouch->irq);
}
@@ -960,10 +1149,12 @@ static int usbtouch_probe(struct usb_int
type->max_press, 0, 0);
usb_fill_int_urb(usbtouch->irq, usbtouch->udev,
- usb_rcvintpipe(usbtouch->udev, endpoint->bEndpointAddress),
+ usb_rcvintpipe(usbtouch->udev,
+ type->endpoint ? type->endpoint
+ : endpoint->bEndpointAddress),
usbtouch->data, type->rept_size,
- usbtouch_irq, usbtouch, endpoint->bInterval);
-
+ usbtouch_irq, usbtouch,
+ type->interval ? type->interval : endpoint->bInterval);
usbtouch->irq->dev = usbtouch->udev;
usbtouch->irq->transfer_dma = usbtouch->data_dma;
usbtouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
@@ -1007,8 +1198,10 @@ static void usbtouch_disconnect(struct u
dbg("%s - usbtouch is initialized, cleaning up", __func__);
usb_set_intfdata(intf, NULL);
usb_kill_urb(usbtouch->irq);
+ usb_kill_urb(usbtouch->ack);
input_unregister_device(usbtouch->input);
usb_free_urb(usbtouch->irq);
+ usb_free_urb(usbtouch->ack);
usbtouch_free_buffers(interface_to_usbdev(intf), usbtouch);
kfree(usbtouch);
}
--
Ondrej Zary
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/