[PATCH] Do not read IIR in serial8250_start_tx when UART_BUG_TXEN

[Jiri Kosina]

The patch below has been lost several times (the last submission happened 
probably on [1]). I am currently aware of a real hardware which triggers 
this problem quite reliably, so we should rather have that really fixed.

[1] http://lkml.org/lkml/2009/3/12/379




From: Ian Jackson <ian.jackson@xxxxxxxxxxxxx>

Do not read IIR in serial8250_start_tx when UART_BUG_TXEN

Reading the IIR clears some oustanding interrupts so it is not safe.
Instead, simply transmit immediately if the buffer is empty without
regard to IIR.

Signed-off-by: Ian Jackson <ian.jackson@xxxxxxxxxxxxx>
Reviewed-by: Markus Armbruster <armbru@xxxxxxxxxx>
Reviewed-by: Jiri Kosina <jkosina@xxxxxxx>

---
 drivers/serial/8250.c |    8 +++-----
 1 files changed, 3 insertions(+), 5 deletions(-)

diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 737b4c9..807042b 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -1339,14 +1339,12 @@ static void serial8250_start_tx(struct uart_port *port)
 		serial_out(up, UART_IER, up->ier);
 
 		if (up->bugs & UART_BUG_TXEN) {
-			unsigned char lsr, iir;
+			unsigned char lsr;
 			lsr = serial_in(up, UART_LSR);
 			up->lsr_saved_flags |= lsr & LSR_SAVE_FLAGS;
-			iir = serial_in(up, UART_IIR) & 0x0f;
 			if ((up->port.type == PORT_RM9000) ?
-				(lsr & UART_LSR_THRE &&
-				(iir == UART_IIR_NO_INT || iir == UART_IIR_THRI)) :
-				(lsr & UART_LSR_TEMT && iir & UART_IIR_NO_INT))
+				(lsr & UART_LSR_THRE) :
+				(lsr & UART_LSR_TEMT))
 				transmit_chars(up);
 		}
 	}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/