Re: [RFC] Block IO Controller V2 - some results

[Alan D. Brunelle]

On Tue, 2009-11-17 at 11:40 -0500, Vivek Goyal wrote:
> On Tue, Nov 17, 2009 at 05:17:53PM +0100, Corrado Zoccolo wrote:
> > Hi Vivek,
> > the performance drop reported by Alan was my main concern about your
> > approach. Probably you should mention/document somewhere that when the
> > number of groups is too large, there is large decrease in random read
> > performance.
> > 
> 
> Hi Corrodo,
> 
> I thought more about it. We idle on sync-noidle group only in case of 
> rotational media not supporting NCQ (hw_tag = 0). So for all the fast
> hardware out there (SSD and fast arrays), we should not be idling on 
> sync-noidle group hence should not additional idling per group.
> 
> This is all subjected to the fact that we have done a good job in
> detecting the queue depth and have updated hw_tag accordingly.
> 
> On slower rotational hardware, where we will actually do idling on
> sync-noidle per group, idling can infact help you because it will reduce
> the number of seeks (As it does on my locally connected SATA disk).
> 
> > However, we can check few things:
> > * is this kernel built with HZ < 1000? The smallest idle CFQ will do
> > is given by 2/HZ, so running with a small HZ will increase the impact
> > of idling.
> > 
> > On Tue, Nov 17, 2009 at 3:14 PM, Vivek Goyal <vgoyal@xxxxxxxxxx> wrote:
> > > Regarding the reduced throughput for random IO case, ideally we should not
> > > idle on sync-noidle group on this hardware as this seems to be a fast NCQ
> > > supporting hardware. But I guess we might not be detecting the queue depth
> > > properly which leads to idling on per group sync-noidle workload and
> > > forces the queue depth to be 1.
> > 
> > * This can be ruled out testing my NCQ detection fix patch
> > (http://groups.google.com/group/linux.kernel/browse_thread/thread/3b62f0665f0912b6/34ec9456c7da1bb7?lnk=raot)
> 
> This will be a good patch to test here. Alan, can you also apply this
> patch and see if we see any improvement.

Vivek: Do you want me to move this over to the V3 version & apply this
patch, or stick w/ V2?

Thanks,
Alan

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/