32-rc2: runtime_pm is noisy

[Pavel Machek]

Hi!

Maybe it is my config, but pm_runtime_idle is a bit too noisy on
zaurus... ok, I do have pm_debug & pm_verbose set... but still, is it
useful to print message about devices that do not support it? 
								Pavel

Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PM: Adding info for platform:serial8250
platform serial8250: __pm_runtime_idle()!
platform serial8250: __pm_runtime_idle() returns -11!
...
serial8250 serial8250: __pm_runtime_idle()!
serial8250 serial8250: __pm_runtime_idle() returns -11!
...
sharpsl-nand sharpsl-nand: __pm_runtime_idle()!
sharpsl-nand sharpsl-nand: __pm_runtime_idle() returns -11!
...
gpio-keys gpio-keys: __pm_runtime_idle()!
gpio-keys gpio-keys: __pm_runtime_idle() returns -11!
PM: Adding info for No Bus:input1
input: matrix-keypad as /class/input/input1
PM: Adding info for No Bus:event1
matrix-keypad matrix-keypad: __pm_runtime_idle()!
matrix-keypad matrix-keypad: __pm_runtime_idle() returns -11!
...
ads7846 spi2.0: __pm_runtime_idle()!
ads7846 spi2.0: __pm_runtime_idle() returns -11!
APM Battery Driver
PM: Adding info for No Bus:hwmon1
max1111 spi2.2: __pm_runtime_idle()!
max1111 spi2.2: __pm_runtime_idle() returns -11!
...
pxa2xx-mci pxa2xx-mci.0: __pm_runtime_idle()!
pxa2xx-mci pxa2xx-mci.0: __pm_runtime_idle() returns -11!
PM: Adding info for No Bus:spitz:amber:charge
Registered led device: spitz:amber:charge
PM: Adding info for No Bus:spitz:green:hddactivity
Registered led device: spitz:green:hddactivity
leds-gpio leds-gpio: __pm_runtime_idle()!
leds-gpio leds-gpio: __pm_runtime_idle() returns -11!
...
sharpsl-pm sharpsl-pm: __pm_runtime_idle()!
sharpsl-pm sharpsl-pm: __pm_runtime_idle() returns -11!
...
ide-gd 0.0: __pm_runtime_idle()!
ide-gd 0.0: __pm_runtime_idle() returns -11!
ide-cs: hda: Vpp = 0.0
ide-cs 1.0: __pm_runtime_idle()!
ide-cs 1.0: __pm_runtime_idle() returns -11!

-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/