[PATCH 3/7] spi-imx: Fix initial chipselect settings

[Uwe Kleine-KÃnig]

From: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>

We can only setup the gpio pins in spi_setup time when we
know the SPI_CS_HIGH setting.

Signed-off-by: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Signed-off-by: Uwe Kleine-KÃnig <u.kleine-koenig@xxxxxxxxxxxxxx>
Cc: David Brownell <dbrownell@xxxxxxxxxxxxxxxxxxxxx>
Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
Cc: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
---
 drivers/spi/spi_imx.c |    7 ++++++-
 1 files changed, 6 insertions(+), 1 deletions(-)

diff --git a/drivers/spi/spi_imx.c b/drivers/spi/spi_imx.c
index a8f9bff..b91a5a8 100644
--- a/drivers/spi/spi_imx.c
+++ b/drivers/spi/spi_imx.c
@@ -478,12 +478,18 @@ static int spi_imx_transfer(struct spi_device *spi,
 
 static int spi_imx_setup(struct spi_device *spi)
 {
+	struct spi_imx_data *spi_imx = spi_master_get_devdata(spi->master);
+	int gpio = spi_imx->chipselect[spi->chip_select];
+
 	if (!spi->bits_per_word)
 		spi->bits_per_word = 8;
 
 	pr_debug("%s: mode %d, %u bpw, %d hz\n", __func__,
 		 spi->mode, spi->bits_per_word, spi->max_speed_hz);
 
+	if (gpio >= 0)
+		gpio_direction_output(gpio, spi->mode & SPI_CS_HIGH ? 0 : 1);
+
 	spi_imx_chipselect(spi, BITBANG_CS_INACTIVE);
 
 	return 0;
@@ -532,7 +538,6 @@ static int __init spi_imx_probe(struct platform_device *pdev)
 			dev_err(&pdev->dev, "can't get cs gpios");
 			goto out_master_put;
 		}
-		gpio_direction_output(spi_imx->chipselect[i], 1);
 	}
 
 	spi_imx->bitbang.chipselect = spi_imx_chipselect;
-- 
1.6.4.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/