[PATCH] twl4030: Initial support for twl5031

From: Ilkka Koskinen
Date: Thu Sep 24 2009 - 11:54:55 EST


TWL5031 introduces two new interrupts in PIH. Moreover, BCI
has changed remarkably and, thus, it's disabled when TWL5031
is in use.

Signed-off-by: Ilkka Koskinen <ilkka.koskinen@xxxxxxxxx>
---
drivers/mfd/twl4030-core.c | 15 +++++-
drivers/mfd/twl4030-irq.c | 126 ++++++++++++++++++++++++++++++++++++++++--
include/linux/i2c/twl4030.h | 47 ++++++++++++++--
3 files changed, 175 insertions(+), 13 deletions(-)

diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c
index cd1008c..952bea5 100644
--- a/drivers/mfd/twl4030-core.c
+++ b/drivers/mfd/twl4030-core.c
@@ -134,6 +134,9 @@
#define TWL4030_BASEADD_PWMB 0x00F1
#define TWL4030_BASEADD_KEYPAD 0x00D2

+#define TWL5031_BASEADD_ACCESSORY 0x0074 /* Replaces Main Charge */
+#define TWL5031_BASEADD_INTERRUPTS 0x00B9 /* Different to TWL4030's one */
+
/* subchip/slave 3 - POWER ID */
#define TWL4030_BASEADD_BACKUP 0x0014
#define TWL4030_BASEADD_INT 0x002E
@@ -164,6 +167,7 @@
/* chip-specific feature flags, for i2c_device_id.driver_data */
#define TWL4030_VAUX2 BIT(0) /* pre-5030 voltage ranges */
#define TPS_SUBSET BIT(1) /* tps659[23]0 have fewer LDOs */
+#define TWL5031 BIT(2) /* twl5031 has different registers */

/*----------------------------------------------------------------------*/

@@ -216,6 +220,8 @@ static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = {
{ 2, TWL4030_BASEADD_PWM1 },
{ 2, TWL4030_BASEADD_PWMA },
{ 2, TWL4030_BASEADD_PWMB },
+ { 2, TWL5031_BASEADD_ACCESSORY },
+ { 2, TWL5031_BASEADD_INTERRUPTS },

{ 3, TWL4030_BASEADD_BACKUP },
{ 3, TWL4030_BASEADD_INT },
@@ -464,7 +470,8 @@ add_children(struct twl4030_platform_data *pdata, unsigned long features)
struct device *child;
struct device *usb_transceiver = NULL;

- if (twl_has_bci() && pdata->bci && !(features & TPS_SUBSET)) {
+ if (twl_has_bci() && pdata->bci &&
+ !((features & TPS_SUBSET) || (features & TWL5031))) {
child = add_child(3, "twl4030_bci",
pdata->bci, sizeof(*pdata->bci),
false,
@@ -707,6 +714,7 @@ static void clocks_init(struct device *dev)

int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end);
int twl_exit_irq(void);
+int twl_init_chip_irq(const char *chip);

static int twl4030_remove(struct i2c_client *client)
{
@@ -780,6 +788,10 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id)
if (client->irq
&& pdata->irq_base
&& pdata->irq_end > pdata->irq_base) {
+ status = twl_init_chip_irq(id->name);
+ if (status < 0)
+ goto fail;
+
status = twl_init_irq(client->irq, pdata->irq_base, pdata->irq_end);
if (status < 0)
goto fail;
@@ -795,6 +807,7 @@ fail:
static const struct i2c_device_id twl4030_ids[] = {
{ "twl4030", TWL4030_VAUX2 }, /* "Triton 2" */
{ "twl5030", 0 }, /* T2 updated */
+ { "twl5031", TWL5031 }, /* TWL5030 updated */
{ "tps65950", 0 }, /* catalog version of twl5030 */
{ "tps65930", TPS_SUBSET }, /* fewer LDOs and DACs; no charger */
{ "tps65920", TPS_SUBSET }, /* fewer LDOs; no codec or charger */
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index aca2670..d781788 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -61,6 +61,7 @@

/* Linux could (eventually) use either IRQ line */
static int irq_line;
+static int chip_is_twl5031;

struct sih {
char name[8];
@@ -82,6 +83,9 @@ struct sih {
/* + 2 bytes padding */
};

+static const struct sih *sih_modules;
+static int nr_sih_modules;
+
#define SIH_INITIALIZER(modname, nbits) \
.module = TWL4030_MODULE_ ## modname, \
.control_offset = TWL4030_ ## modname ## _SIH_CTRL, \
@@ -107,7 +111,7 @@ struct sih {
/* Order in this table matches order in PIH_ISR. That is,
* BIT(n) in PIH_ISR is sih_modules[n].
*/
-static const struct sih sih_modules[6] = {
+static const struct sih sih_modules_twl4030[6] = {
[0] = {
.name = "gpio",
.module = TWL4030_MODULE_GPIO,
@@ -164,6 +168,84 @@ static const struct sih sih_modules[6] = {
/* there are no SIH modules #6 or #7 ... */
};

+static const struct sih sih_modules_twl5031[8] = {
+ [0] = {
+ .name = "gpio",
+ .module = TWL4030_MODULE_GPIO,
+ .control_offset = REG_GPIO_SIH_CTRL,
+ .set_cor = true,
+ .bits = TWL4030_GPIO_MAX,
+ .bytes_ixr = 3,
+ /* Note: *all* of these IRQs default to no-trigger */
+ .edr_offset = REG_GPIO_EDR1,
+ .bytes_edr = 5,
+ .mask = { {
+ .isr_offset = REG_GPIO_ISR1A,
+ .imr_offset = REG_GPIO_IMR1A,
+ }, {
+ .isr_offset = REG_GPIO_ISR1B,
+ .imr_offset = REG_GPIO_IMR1B,
+ }, },
+ },
+ [1] = {
+ .name = "keypad",
+ .set_cor = true,
+ SIH_INITIALIZER(KEYPAD_KEYP, 4)
+ },
+ [2] = {
+ .name = "bci",
+ .module = TWL5031_MODULE_INTERRUPTS,
+ .control_offset = TWL5031_INTERRUPTS_BCISIHCTRL,
+ .bits = 7,
+ .bytes_ixr = 1,
+ .edr_offset = TWL5031_INTERRUPTS_BCIEDR1,
+ /* Note: most of these IRQs default to no-trigger */
+ .bytes_edr = 2,
+ .mask = { {
+ .isr_offset = TWL5031_INTERRUPTS_BCIISR1,
+ .imr_offset = TWL5031_INTERRUPTS_BCIIMR1,
+ }, {
+ .isr_offset = TWL5031_INTERRUPTS_BCIISR2,
+ .imr_offset = TWL5031_INTERRUPTS_BCIIMR2,
+ }, },
+ },
+ [3] = {
+ .name = "madc",
+ SIH_INITIALIZER(MADC, 4)
+ },
+ [4] = {
+ /* USB doesn't use the same SIH organization */
+ .name = "usb",
+ },
+ [5] = {
+ .name = "power",
+ .set_cor = true,
+ SIH_INITIALIZER(INT_PWR, 8)
+ },
+ [6] = {
+ /* ECI/DBI/BSI (ACI) does not have SIH */
+ .name = "aci",
+ },
+ [7] = {
+ /* Accessory */
+ .name = "acc",
+ .module = TWL5031_MODULE_ACCESSORY,
+ .control_offset = TWL5031_ACCSIHCTRL,
+ .bits = 2,
+ .bytes_ixr = 1,
+ .edr_offset = TWL5031_ACCEDR1,
+ /* Note: most of these IRQs default to no-trigger */
+ .bytes_edr = 1,
+ .mask = { {
+ .isr_offset = TWL5031_ACCISR1,
+ .imr_offset = TWL5031_ACCIMR1,
+ }, {
+ .isr_offset = TWL5031_ACCISR2,
+ .imr_offset = TWL5031_ACCIMR2,
+ }, },
+ },
+};
+
#undef TWL4030_MODULE_KEYPAD_KEYP
#undef TWL4030_MODULE_INT_PWR
#undef TWL4030_INT_PWR_EDR
@@ -301,11 +383,20 @@ static int twl4030_init_sih_modules(unsigned line)
/* disable all interrupts on our line */
memset(buf, 0xff, sizeof buf);
sih = sih_modules;
- for (i = 0; i < ARRAY_SIZE(sih_modules); i++, sih++) {
+ for (i = 0; i < nr_sih_modules; i++, sih++) {

/* skip USB -- it's funky */
- if (!sih->bytes_ixr)
+ /* But don't skip TWL5031's ACI */
+ if (!sih->bytes_ixr) {
+ if (chip_is_twl5031 && !strcmp(sih->name, "aci")) {
+ twl4030_i2c_write(TWL5031_MODULE_ACCESSORY,
+ buf, TWL5031_ACIIMR_LSB, 1);
+ twl4030_i2c_write(TWL5031_MODULE_ACCESSORY,
+ buf, TWL5031_ACIIMR_MSB, 1);
+ }
+
continue;
+ }

status = twl4030_i2c_write(sih->module, buf,
sih->mask[line].imr_offset, sih->bytes_ixr);
@@ -331,13 +422,22 @@ static int twl4030_init_sih_modules(unsigned line)
}

sih = sih_modules;
- for (i = 0; i < ARRAY_SIZE(sih_modules); i++, sih++) {
+ for (i = 0; i < nr_sih_modules; i++, sih++) {
u8 rxbuf[4];
int j;

/* skip USB */
- if (!sih->bytes_ixr)
+ /* But don't skip TWL5031's ACI */
+ if (!sih->bytes_ixr) {
+ if (chip_is_twl5031 && !strcmp(sih->name, "aci")) {
+ twl4030_i2c_write(TWL5031_MODULE_ACCESSORY,
+ buf, TWL5031_ACIIDR_LSB, 1);
+ twl4030_i2c_write(TWL5031_MODULE_ACCESSORY,
+ buf, TWL5031_ACIIDR_MSB, 1);
+ }
+
continue;
+ }

/* Clear pending interrupt status. Either the read was
* enough, or we need to write those bits. Repeat, in
@@ -628,7 +728,7 @@ int twl4030_sih_setup(int module)

/* only support modules with standard clear-on-read for now */
for (sih_mod = 0, sih = sih_modules;
- sih_mod < ARRAY_SIZE(sih_modules);
+ sih_mod < nr_sih_modules;
sih_mod++, sih++) {
if (sih->module == module && sih->set_cor) {
if (!WARN((irq_base + sih->bits) > NR_IRQS,
@@ -763,3 +863,17 @@ int twl_exit_irq(void)
}
return 0;
}
+
+int twl_init_chip_irq(const char *chip)
+{
+ if (!strcmp(chip, "twl5031")) {
+ chip_is_twl5031 = 1;
+ sih_modules = sih_modules_twl5031;
+ nr_sih_modules = ARRAY_SIZE(sih_modules_twl5031);
+ } else {
+ sih_modules = sih_modules_twl4030;
+ nr_sih_modules = ARRAY_SIZE(sih_modules_twl4030);
+ }
+
+ return 0;
+}
diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h
index 0dc80ef..838916f 100644
--- a/include/linux/i2c/twl4030.h
+++ b/include/linux/i2c/twl4030.h
@@ -58,13 +58,16 @@
#define TWL4030_MODULE_PWMA 0x0E
#define TWL4030_MODULE_PWMB 0x0F

+#define TWL5031_MODULE_ACCESSORY 0x10
+#define TWL5031_MODULE_INTERRUPTS 0x11
+
/* Slave 3 (i2c address 0x4b) */
-#define TWL4030_MODULE_BACKUP 0x10
-#define TWL4030_MODULE_INT 0x11
-#define TWL4030_MODULE_PM_MASTER 0x12
-#define TWL4030_MODULE_PM_RECEIVER 0x13
-#define TWL4030_MODULE_RTC 0x14
-#define TWL4030_MODULE_SECURED_REG 0x15
+#define TWL4030_MODULE_BACKUP 0x12
+#define TWL4030_MODULE_INT 0x13
+#define TWL4030_MODULE_PM_MASTER 0x14
+#define TWL4030_MODULE_PM_RECEIVER 0x15
+#define TWL4030_MODULE_RTC 0x16
+#define TWL4030_MODULE_SECURED_REG 0x17

/*
* Read and write single 8-bit registers
@@ -218,6 +221,38 @@ int twl4030_i2c_read(u8 mod_no, u8 *value, u8 reg, unsigned num_bytes);

/*----------------------------------------------------------------------*/

+/*
+ * Accessory Interrupts
+ */
+#define TWL5031_ACIIMR_LSB 0x05
+#define TWL5031_ACIIMR_MSB 0x06
+#define TWL5031_ACIIDR_LSB 0x07
+#define TWL5031_ACIIDR_MSB 0x08
+#define TWL5031_ACCISR1 0x0F
+#define TWL5031_ACCIMR1 0x10
+#define TWL5031_ACCISR2 0x11
+#define TWL5031_ACCIMR2 0x12
+#define TWL5031_ACCSIR 0x13
+#define TWL5031_ACCEDR1 0x14
+#define TWL5031_ACCSIHCTRL 0x15
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Battery Charger Controller
+ */
+
+#define TWL5031_INTERRUPTS_BCIISR1 0x0
+#define TWL5031_INTERRUPTS_BCIIMR1 0x1
+#define TWL5031_INTERRUPTS_BCIISR2 0x2
+#define TWL5031_INTERRUPTS_BCIIMR2 0x3
+#define TWL5031_INTERRUPTS_BCISIR 0x4
+#define TWL5031_INTERRUPTS_BCIEDR1 0x5
+#define TWL5031_INTERRUPTS_BCIEDR2 0x6
+#define TWL5031_INTERRUPTS_BCISIHCTRL 0x7
+
+/*----------------------------------------------------------------------*/
+
/* Power bus message definitions */

#define DEV_GRP_NULL 0x0
--
1.6.0.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/