Re: [PATCH] libata: Add pata_atp867x driver for Artop/Acard ATP867X controllers

[Jeff Garzik]

On 09/15/2009 12:32 AM, Jung-Ik (John) Lee wrote:
> From: John(Jung-Ik) Lee<jilee@xxxxxxxxxx>
>
> This is a new pata driver for ARTOP 867X 64bit 4-channel UDMA133 ATA ctrls.
> Based on the Atp867 data sheet rev 1.2, Acard, and in part on early ide codes
> from Eric Uhrhane<ericu@xxxxxxxxxx>.
>
> Signed-off-by: John(Jung-Ik) Lee<jilee@xxxxxxxxxx>
> Reviewed-by:  Grant Grundler<grundler@xxxxxxxxxx>
> Reviewed-by:  Gwendal Gringo<gwendal@xxxxxxxxxx>
> ---
>
>   rev 01: Cleared some checkpatch.pl complaints. Thanks to Daniel.
>   rev 02: Removed hard-coded value for active/recovery. Thanks to Robert.
>           Use atp867x_cable_detect() until ata_cable_40short()
>   rev 03: changes per Jeff's comment: Thansk to Jeff.
> 	 ioread/iowrite, enum, speed-to-mode calc, single mapping, etc.
>
>   drivers/ata/Kconfig        |    9 +
>   drivers/ata/Makefile       |    1 +
>   drivers/ata/pata_atp867x.c |  548 ++++++++++++++++++++++++++++++++++++++++++++
>   include/linux/pci_ids.h    |    2 +
>   4 files changed, 560 insertions(+), 0 deletions(-)

applied


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/