[GIT PULL] davinci platform updates for 2.6.32

From: Kevin Hilman
Date: Wed Sep 16 2009 - 17:53:29 EST

Next message: Jean-Christophe PLAGNIOL-VILLARD: "Re: [PATCH] at91: add AC97 support to at91sam9rl and at91sam9rlekboard"
Previous message: Jamie Lokier: "Re: fanotify as syscalls"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Linus,

Please pull the DaVinci platform updates for 2.6.32.

For background, davinci is an ARM subarch and we discussed submitting
ARM subarch/platform support directly to you here:
http://lkml.org/lkml/2009/8/24/161

The non-platform specific files that are touched are MAINTAINERS
(davinci maintainer update) and one under sound/soc/davinci which has
been reviewed/Ack'd by ASoC folks (Mark Brown) and been tested for
several weeks in linux-next along with the rest of the ASoC changes.

Thanks,

Kevin

The following changes since commit 422bef879e84104fee6dc68ded0e371dbeb5f88e:
Linus Torvalds (1):
Linux 2.6.31-rc7

are available in the git repository at:

master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci.git davinci-for-linus

or

git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci.git davinci-for-linus

Chaithrika U S (5):
davinci: dm646x: Adds McASP clock
davinci: ASoC: Add the platform devices for ASP
davinci: Audio support for DA830 EVM
davinci: Audio support for DA850/OMAP-L138 EVM
davinci: audio: move tlv320aic33 i2c setup into board files

David Brownell (3):
davinci: sram warning fix
davinci: dm365 evm cpld support: leds, card detect, other setup
davinci: dm365 gpio irq support

David Griego (1):
davinci: Fix watchdog reset code

Hemant Pedanekar (4):
davinci: dm646x: Add clock info and update mux setup for ATA
davinci: Move IO device mapping macros from io.h to hardware.h
davinci: dm646x: Add IDE setup
davinci: dm646x-evm: Add support for IDE

Kevin Hilman (8):
MAINTAINERS: add entry for TI DaVinci machine support
davinci: Kconfig: enable EVMs by default when SoCs are enabled
davinci: remove watchdog from soc_info
davinci: Kconfig: update default config for 2.6.31-rc
davinci: da830: updates for mach-type name change
davinci: Kconfig: update default defconfig
davinci: audio clocks: use struct device instead of clock names
davinci: Kconfig: add dm646x ASoC support

Mark A. Greer (2):
davinci: da8xx: Add base DA830/OMAP-L137 SoC support
davinci: da8xx: Add support for DA830/OMAP-L137 EVM board

Muralidharan Karicheri (3):
davinci: DM644x platform changes for vpfe capture
davinci: DM355 - platform changes for vpfe capture
DaVinci: DM646x - platform changes for vpif capture and display drivers

Rajashekhara, Sudhakar (2):
davinci: dm644x: Support for dm644x silicon revision 2.1
davinci: Move the da830/omap-l137 #defines to header file

Sandeep Paulraj (17):
davinci: Adding DM365 SOC Support
davinci: Adding DM365 EVM board support
davinci: Adding DM365 entries to Makefile/Kconfig/defconfig
davinci: dm365: add mux entries for EDMA, RTC, EMAC, keypad.
davinci: dm365: EMAC support for SoC and dm365 EVM
davinci: dm365: add EDMA support
davinci: dm365: add MMC/SD support
davinci: MMC/SD Support for dm365 EVM
davinci: dm365: add NAND support to EVM board
davinci: DM365 Updating PINMUX Entries
DaVinci: EDMA: Add queue 2 and 3 for DM365 and DM6467
DaVinci: EDMA: Updating default queue handling
DaVinci: DM365: Fix Compilation issue due to PINMUX entry
DaVinci: DM365: Add Support for new Revision of silicon
DaVinci: DM355: Adding PINMUX entries for DM355 Display
DaVinci: DM365: Adding entries for DM365 IRQ's
DaVinci: EDMA: Adding 2 new APIs for allocating/freeing PARAMs

Sekhar Nori (1):
davinci: make arch_idle and arch_reset as inline functions

Sergei Shtylyov (1):
davinci: DM646x: pass correct MUSB IRQs

Sudhakar Rajashekhara (15):
davinci: EDMA: multiple CCs, channel mapping and API changes
davinci: EDMA: add support for dm646x
davinci: Pass proper EDMA CC interrupt number for DA830/OMAP-L137
davinci: Rearrange the da830/omap-l137 macros and functions
davinci: Add base DA850/OMAP-L138 SoC support
davinci: Add support for DA850/OMAP-L138 EVM board
davinci: Add EMAC support for da850/omap-l138
davinci: Configure MDIO pins for EMAC
davinci: Correct the number of GPIO pins for da850/omap-l138
davinci: Macro to convert GPIO signal to GPIO pin number
davinci: Add platform support for da850/omap-l138 GLCD
davinci: Add MMC/SD support for da850/omap-l138
davinci: Add NAND flash support for DA850/OMAP-L138
davinci: Add NOR flash support for da850/omap-l138
davinci: Handle pinmux conflict between mmc/sd and nor flash

MAINTAINERS | 6 +
arch/arm/configs/da830_omapl137_defconfig | 1254 ++++++++++++++++++++++
arch/arm/configs/da850_omapl138_defconfig | 1229 +++++++++++++++++++++
arch/arm/configs/davinci_all_defconfig | 173 ++--
arch/arm/mach-davinci/Kconfig | 49 +-
arch/arm/mach-davinci/Makefile | 14 +-
arch/arm/mach-davinci/Makefile.boot | 10 +
arch/arm/mach-davinci/board-da830-evm.c | 157 +++
arch/arm/mach-davinci/board-da850-evm.c | 415 +++++++
arch/arm/mach-davinci/board-dm355-evm.c | 83 ++-
arch/arm/mach-davinci/board-dm365-evm.c | 492 +++++++++
arch/arm/mach-davinci/board-dm644x-evm.c | 81 ++-
arch/arm/mach-davinci/board-dm646x-evm.c | 410 +++++++
arch/arm/mach-davinci/clock.c | 5 +-
arch/arm/mach-davinci/da830.c | 1205 +++++++++++++++++++++
arch/arm/mach-davinci/da850.c | 820 ++++++++++++++
arch/arm/mach-davinci/devices-da8xx.c | 450 ++++++++
arch/arm/mach-davinci/devices.c | 60 +-
arch/arm/mach-davinci/dm355.c | 174 +++-
arch/arm/mach-davinci/dm365.c | 926 ++++++++++++++++
arch/arm/mach-davinci/dm644x.c | 141 +++-
arch/arm/mach-davinci/dm646x.c | 321 ++++++-
arch/arm/mach-davinci/dma.c | 955 ++++++++++++-----
arch/arm/mach-davinci/gpio.c | 105 ++-
arch/arm/mach-davinci/include/mach/asp.h | 56 +-
arch/arm/mach-davinci/include/mach/common.h | 2 +-
arch/arm/mach-davinci/include/mach/cputype.h | 24 +
arch/arm/mach-davinci/include/mach/da8xx.h | 121 +++
arch/arm/mach-davinci/include/mach/debug-macro.S | 8 +
arch/arm/mach-davinci/include/mach/dm355.h | 7 +
arch/arm/mach-davinci/include/mach/dm365.h | 29 +
arch/arm/mach-davinci/include/mach/dm644x.h | 4 +
arch/arm/mach-davinci/include/mach/dm646x.h | 65 ++
arch/arm/mach-davinci/include/mach/edma.h | 67 ++-
arch/arm/mach-davinci/include/mach/gpio.h | 13 +-
arch/arm/mach-davinci/include/mach/hardware.h | 17 +
arch/arm/mach-davinci/include/mach/io.h | 23 +-
arch/arm/mach-davinci/include/mach/irqs.h | 205 ++++-
arch/arm/mach-davinci/include/mach/memory.h | 9 +-
arch/arm/mach-davinci/include/mach/mux.h | 731 +++++++++++++
arch/arm/mach-davinci/include/mach/psc.h | 62 ++
arch/arm/mach-davinci/include/mach/serial.h | 6 +-
arch/arm/mach-davinci/include/mach/system.h | 4 +-
arch/arm/mach-davinci/include/mach/uncompress.h | 7 +-
arch/arm/mach-davinci/include/mach/vmalloc.h | 2 +-
arch/arm/mach-davinci/mux.c | 14 +
arch/arm/mach-davinci/sram.c | 2 +-
arch/arm/mach-davinci/time.c | 16 +-
arch/arm/mach-davinci/usb.c | 13 +
sound/soc/davinci/davinci-pcm.c | 6 +-
50 files changed, 10535 insertions(+), 513 deletions(-)
create mode 100644 arch/arm/configs/da830_omapl137_defconfig
create mode 100644 arch/arm/configs/da850_omapl138_defconfig
create mode 100644 arch/arm/mach-davinci/board-da830-evm.c
create mode 100644 arch/arm/mach-davinci/board-da850-evm.c
create mode 100644 arch/arm/mach-davinci/board-dm365-evm.c
create mode 100644 arch/arm/mach-davinci/da830.c
create mode 100644 arch/arm/mach-davinci/da850.c
create mode 100644 arch/arm/mach-davinci/devices-da8xx.c
create mode 100644 arch/arm/mach-davinci/dm365.c
create mode 100644 arch/arm/mach-davinci/include/mach/da8xx.h
create mode 100644 arch/arm/mach-davinci/include/mach/dm365.h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Jean-Christophe PLAGNIOL-VILLARD: "Re: [PATCH] at91: add AC97 support to at91sam9rl and at91sam9rlekboard"
Previous message: Jamie Lokier: "Re: fanotify as syscalls"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]