Re: [Alacrityvm-devel] [PATCH v3 3/6] vbus: add a "vbus-proxy" busmodel for vbus_driver objects

[Ira W. Snyder]

On Tue, Aug 18, 2009 at 08:47:04PM +0300, Avi Kivity wrote:
> On 08/18/2009 08:27 PM, Ira W. Snyder wrote:
>>> In fact, modern x86s do have dma engines these days (google for Intel
>>> I/OAT), and one of our plans for vhost-net is to allow their use for
>>> packets above a certain size.  So a patch allowing vhost-net to
>>> optionally use a dma engine is a good thing.
>>>      
>> Yes, I'm aware that very modern x86 PCs have general purpose DMA
>> engines, even though I don't have any capable hardware. However, I think
>> it is better to support using any PC (with or without DMA engine, any
>> architecture) as the PCI master, and just handle the DMA all from the
>> PCI agent, which is known to have DMA?
>>    
>
> Certainly; but if your PCI agent will support the DMA API, then the same  
> vhost code will work with both I/OAT and your specialized hardware.
>

Yes, that's true. My ppc is a Freescale MPC8349EMDS. It has a Linux
DMAEngine driver in mainline, which I've used. That's excellent.

>>> Exposing a knob to userspace is not an insurmountable problem; vhost-net
>>> already allows changing the memory layout, for example.
>>>
>>>      
>> Let me explain the most obvious problem I ran into: setting the MAC
>> addresses used in virtio.
>>
>> On the host (PCI master), I want eth0 (virtio-net) to get a random MAC
>> address.
>>
>> On the guest (PCI agent), I want eth0 (virtio-net) to get a specific MAC
>> address, aa:bb:cc:dd:ee:ff.
>>
>> The virtio feature negotiation code handles this, by seeing the
>> VIRTIO_NET_F_MAC feature in it's configuration space. If BOTH drivers do
>> not have VIRTIO_NET_F_MAC set, then NEITHER will use the specified MAC
>> address. This is because the feature negotiation code only accepts a
>> feature if it is offered by both sides of the connection.
>>
>> In this case, I must have the guest generate a random MAC address and
>> have the host put aa:bb:cc:dd:ee:ff into the guest's configuration
>> space. This basically means hardcoding the MAC addresses in the Linux
>> drivers, which is a big no-no.
>>
>> What would I expose to userspace to make this situation manageable?
>>
>>    
>
> I think in this case you want one side to be virtio-net (I'm guessing  
> the x86) and the other side vhost-net (the ppc boards with the dma  
> engine).  virtio-net on x86 would communicate with userspace on the ppc  
> board to negotiate features and get a mac address, the fast path would  
> be between virtio-net and vhost-net (which would use the dma engine to  
> push and pull data).
>

Ah, that seems backwards, but it should work after vhost-net learns how
to use the DMAEngine API.

I haven't studied vhost-net very carefully yet. As soon as I saw the
copy_(to|from)_user() I stopped reading, because it seemed useless for
my case. I'll look again and try to find where vhost-net supports
setting MAC addresses and other features.

Also, in my case I'd like to boot Linux with my rootfs over NFS. Is
vhost-net capable of this?

I've had Arnd, BenH, and Grant Likely (and others, privately) contact me
about devices they are working with that would benefit from something
like virtio-over-PCI. I'd like to see vhost-net be merged with the
capability to support my use case. There are plenty of others that would
benefit, not just myself.

I'm not sure vhost-net is being written with this kind of future use in
mind. I'd hate to see it get merged, and then have to change the ABI to
support physical-device-to-device usage. It would be better to keep
future use in mind now, rather than try and hack it in later.

Thanks for the comments.
Ira
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/