Re: [PATCH 0/3]: Discard reserved PXM bits for SRAT v1

[Chuck Ebbert]

On Mon, 18 May 2009 11:33:52 +0200
Kurt Garloff <garloff@xxxxxxx> wrote:

> Hi,
> 
> ACPI specification says that the OS must disregard reserved bits.
> The x86_64 SRAT parser does not discard the upper 24 bits of the
> proximity_domain (pxm) in the acpi_srat_mem_affinity entries for
> SRAT v1 tables. (v2 has 32 bits wide fields.)
> This can lead to problems with poor BIOS implementations that failed
> to set resreved bytes to zero. (The ACPI spec is a bit vague here
> unfortunately.)
> 
> This was also inconsistent: On x86-64 (srat_64.c), the 
> _cpu_affinity does only use the low 8 bits of pxm, while the
> full 32 bits of _mem_affinity are consumed.
> In srat_32.c (x86), only 8bits are used (which is OK, a 32bit system
> with >256 PXMs does not seem reasonable at all).
> On ia64, the support of more than 8 bits was consistent between
> mem and cpu affinity entries, however it dependent on "sn2" platform.
> 
> The patch series has the following goals:
> * Make the kernel support consistently 8bits or 32bits for the
>   proximity domain
> * Make this dependent on the SRAT version; v1 => 8bits, v2 => 32bits.
> 
> Overview over the patches:
> - [1/3] Store the SRAT table version value in acpi_srat_revision 
> - [2/3] x86-64: Discard the upper 24 bits in mem_affinity if rev <= 1
>         and use upper 24bits in cpu_affinity if rev >= 2
> - [3/3] ia64: Also use upper 8/24bits if rev >= 2 (but leave logic to
>         enable on sn2 as well -- I don't know if sn2 reports v1 or v2
>         SRAT) Also add two __init decls in ia64 pxm accessors.
> 

Did this patchset get lost or something? I don't see it anywhere, not even
in the ACPI 'testing' tree...
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/