Re: [PATCH v3] OMAP1: AMS_DELTA: add modem support

[Tony Lindgren]

* Jonathan McDowell <noodles@xxxxxxxx> [090810 13:01]:
> On Mon, Aug 10, 2009 at 11:12:48AM +0200, Janusz Krzysztofik wrote:
> > Jonathan, Tony,
> > 
> > Any chance for this patch ready for 2.6.32 inclusion? Or maybe v2,
> > that has no external dependencies and can be updated later to v3 when
> > Vikram's changes get accepted upstream?
> 
> Vikram's patch is in linux-next, so there shouldn't be a problem with
> this version of your patch for 2.6.32. I haven't been able to test it
> myself (though I hope to next week), but it looks ok from a brief
> inspection, so:
> 
> Acked-By: Jonathan McDowell <noodles@xxxxxxxx>

Looks good to me, will queue it to my omap1-upstream shortly.

Tony

>  
> > Monday 06 July 2009 12:24:27 Janusz Krzysztofik wrote:
> > > This patch adds support for modem device found on Amstrad E3 (Delta) board.
> > >
> > > Based on earlier patch by Jonathan McDowell, available at
> > > http://the.earth.li/pub/e3/2.6.19/ams-delta-modem.patch.
> > > Modified after Ladislav Michl's arch/arm/mach-omap1/board-voiceblue.c.
> > >
> > > This version, unlike v2, is dependent on 8250 driver changes getting
> > > accepted upstream:
> > > Refer: http://patchwork.kernel.org/patch/31884/
> > >
> > > Signed-off-by: Janusz Krzysztofik <jkrzyszt@xxxxxxxxxxxx>
> > > ---
> > > Registering the modem platform device from a separate arch_initcall (and
> > > not from init_machine() callback) preserves serial console port at ttyS0.
> > >
> > > OMAP mux pin set up just for case if Amstrad bootloader is ever replaced.
> > >
> > > Warning:
> > > could cause compilation break if 8250 patch is not integrated first
> > >
> > > --- linux-2.6.31-rc1/arch/arm/mach-omap1/board-ams-delta.c.orig	2009-07-04
> > > 16:39:37.000000000 +0200 +++
> > > linux-2.6.31-rc1/arch/arm/mach-omap1/board-ams-delta.c	2009-07-05
> > > 13:41:08.000000000 +0200 @@ -15,8 +15,11 @@
> > >  #include <linux/kernel.h>
> > >  #include <linux/init.h>
> > >  #include <linux/input.h>
> > > +#include <linux/interrupt.h>
> > >  #include <linux/platform_device.h>
> > > +#include <linux/serial_8250.h>
> > >
> > > +#include <asm/serial.h>
> > >  #include <mach/hardware.h>
> > >  #include <asm/mach-types.h>
> > >  #include <asm/mach/arch.h>
> > > @@ -235,6 +238,41 @@ static void __init ams_delta_init(void)
> > >  	platform_add_devices(ams_delta_devices, ARRAY_SIZE(ams_delta_devices));
> > >  }
> > >
> > > +static struct plat_serial8250_port ams_delta_modem_ports[] = {
> > > +	{
> > > +		.membase	= (void *) AMS_DELTA_MODEM_VIRT,
> > > +		.mapbase	= AMS_DELTA_MODEM_PHYS,
> > > +		.irq		= -EINVAL, /* changed later */
> > > +		.flags		= UPF_BOOT_AUTOCONF,
> > > +		.irqflags	= IRQF_TRIGGER_RISING,
> > > +		.iotype		= UPIO_MEM,
> > > +		.regshift	= 1,
> > > +		.uartclk	= BASE_BAUD * 16,
> > > +	},
> > > +	{ },
> > > +};
> > > +
> > > +static struct platform_device ams_delta_modem_device = {
> > > +	.name	= "serial8250",
> > > +	.id	= PLAT8250_DEV_PLATFORM1,
> > > +	.dev		= {
> > > +		.platform_data = ams_delta_modem_ports,
> > > +	},
> > > +};
> > > +
> > > +static int __init ams_delta_modem_init(void)
> > > +{
> > > +	omap_cfg_reg(M14_1510_GPIO2);
> > > +	ams_delta_modem_ports[0].irq = gpio_to_irq(2);
> > > +
> > > +	ams_delta_latch2_write(
> > > +		AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC,
> > > +		AMS_DELTA_LATCH2_MODEM_NRESET | AMS_DELTA_LATCH2_MODEM_CODEC);
> > > +
> > > +	return platform_device_register(&ams_delta_modem_device);
> > > +}
> > > +arch_initcall(ams_delta_modem_init);
> > > +
> > >  static void __init ams_delta_map_io(void)
> > >  {
> > >  	omap1_map_common_io();
> > 
> > 
> 
> J.
> 
> -- 
> Revd. Jonathan McDowell, ULC | I am a passenger.
> 
> -------------------------------------------------------------------
> List admin: http://lists.arm.linux.org.uk/mailman/listinfo/linux-arm-kernel
> FAQ:        http://www.arm.linux.org.uk/mailinglists/faq.php
> Etiquette:  http://www.arm.linux.org.uk/mailinglists/etiquette.php
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/