Re: [PATCH v3] davinci: fb: Frame Buffer driver for TIDA8xx/OMAP-L1xx

[Andrew Morton]

On Wed, 15 Jul 2009 03:57:34 -0400
Sudhakar Rajashekhara <sudhakar.raj@xxxxxx> wrote:

> Adds LCD controller (LCDC) driver for TI's DA8xx/OMAP-L1xx
> architecture. LCDC specifications can be found at
> http://www.ti.com/litv/pdf/sprufm0a.
> 
> LCDC on DA8xx consists of two independent controllers, the
> Raster Controller and the LCD Interface Display Driver (LIDD)
> controller. LIDD further supports character and graphic displays.
> 
> This patch adds support for the graphic display (Sharp LQ035Q3DG01)
> found on the DA830 based EVM. The EVM details can be found at:
> http://support.spectrumdigital.com/boards/dskda830/revc/.
>
>
> ...
>
> --- a/drivers/video/Kconfig
> +++ b/drivers/video/Kconfig
> @@ -2038,6 +2038,17 @@ config FB_SH7760
>  	  and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
>  	  panels <= 320 pixel horizontal resolution.
>  
> +config FB_DA8XX
> +        tristate "DA8xx/OMAP-L1xx Framebuffer support"
> +        depends on FB && ARCH_DAVINCI_DA8XX
> +	select FB_CFB_FILLRECT
> +	select FB_CFB_COPYAREA
> +	select FB_CFB_IMAGEBLIT
> +	---help---
> +          This is the frame buffer device driver for the TI LCD controller
> +	  found on DA8xx/OMAP-L1xx SoCs.
> +          If unsure, say N.

Leading whitespace is all mucked up there - I fixed it.

>  config FB_VIRTUAL
>  	tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
>  	depends on FB
>
> ...
>
> +/* Disable the Raster Engine of the LCD Controller */
> +static int lcd_disable_raster(struct da8xx_fb_par *par)
> +{
> +	int ret = 0;
> +	u32 reg;
> +
> +	reg = lcdc_read(LCD_RASTER_CTRL_REG);
> +	if (reg & LCD_RASTER_ENABLE) {
> +		lcdc_write(reg & ~LCD_RASTER_ENABLE, LCD_RASTER_CTRL_REG);
> +		ret = wait_event_interruptible_timeout(par->da8xx_wq,
> +						!lcdc_read(LCD_STAT_REG) &
> +						LCD_END_OF_FRAME0, WSI_TIMEOUT);
> +	}
> +
> +	if (ret < 0)
> +		return ret;
> +	if (ret == 0)
> +		return -ETIMEDOUT;
> +
> +	return 0;
> +}

This looks wrongish.  If LCD_RASTER_ENABLE is not set, it will return
-ETIMEDOUT without ever having waited for anything.

>
> ...
>
> +static int fb_ioctl(struct fb_info *info, unsigned int cmd,
> +			  unsigned long arg)
> +{
> +	struct lcd_sync_arg sync_arg;
> +
> +	switch (cmd) {
> +	case FBIOGET_CONTRAST:
> +	case FBIOPUT_CONTRAST:
> +	case FBIGET_BRIGHTNESS:
> +	case FBIPUT_BRIGHTNESS:
> +	case FBIGET_COLOR:
> +	case FBIPUT_COLOR:
> +		return -EINVAL;
> +	case FBIPUT_HSYNC:
> +		if (copy_from_user(&sync_arg, (char *)arg,
> +				sizeof(struct lcd_sync_arg)))
> +			return -EINVAL;

-EFAULT?

> +		lcd_cfg_horizontal_sync(sync_arg.back_porch,
> +					sync_arg.pulse_width,
> +					sync_arg.front_porch);
> +		break;
> +	case FBIPUT_VSYNC:
> +		if (copy_from_user(&sync_arg, (char *)arg,
> +				sizeof(struct lcd_sync_arg)))
> +			return -EINVAL;

-EFAULT?

> +		lcd_cfg_vertical_sync(sync_arg.back_porch,
> +					sync_arg.pulse_width,
> +					sync_arg.front_porch);
> +		break;
> +	default:
> +		return -EINVAL;

-ENOTTY?  (Maybe not - I forget)

> +	}
> +	return 0;
> +}
> +
>
> ...
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/