Re: [PATCH] Input: add MAX7359 key switch controller driver, v2

From: Dmitry Torokhov
Date: Mon Jul 13 2009 - 05:32:03 EST


On Mon, Jul 13, 2009 at 02:22:10PM +0530, Trilok Soni wrote:
> Hi Dmitry,
>
>
> I don't see this driver picked up yet in your -next branch. We should
> target this driver to be mainlined in next merge window. This is very
> important driver for some of the embedded systems, including palm pre
> :)
>

I was wondering if somebody could test the patch below and if it still
works then I will apply to the next branch. Thanks!

--
Dmitry


Input: max7359 - use threaded IRQs

From: Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>

Convert max7359 driver to use IRQ threading instead of using
workqueue.

Signed-off-by: Dmitry Torokhov <dtor@xxxxxxx>
---

drivers/input/keyboard/max7359_keypad.c | 34 +++++++++++++------------------
1 files changed, 14 insertions(+), 20 deletions(-)


diff --git a/drivers/input/keyboard/max7359_keypad.c b/drivers/input/keyboard/max7359_keypad.c
index e359db3..c823c0b 100644
--- a/drivers/input/keyboard/max7359_keypad.c
+++ b/drivers/input/keyboard/max7359_keypad.c
@@ -57,8 +57,6 @@ struct max7359_keypad {
/* matrix key code map */
unsigned short keycodes[MAX7359_MAX_KEY_NUM];

- struct work_struct work;
-
struct input_dev *input_dev;
struct i2c_client *client;

@@ -103,10 +101,10 @@ static void max7359_build_keycode(struct max7359_keypad *keypad,
__clear_bit(KEY_RESERVED, input_dev->keybit);
}

-static void max7359_worker(struct work_struct *work)
+/* runs in an IRQ thread -- can (and will!) sleep */
+static irqreturn_t max7359_interrupt(int irq, void *dev_id)
{
- struct max7359_keypad *keypad =
- container_of(work, struct max7359_keypad, work);
+ struct max7359_keypad *keypad = dev_id;
struct input_dev *input_dev = keypad->input_dev;
int val, row, col, release, code;

@@ -116,26 +114,23 @@ static void max7359_worker(struct work_struct *work)
release = val & 0x40;
code = (row << 3) + col;

+ dev_dbg(&keypad->client->dev,
+ "key[%d:%d] %s\n", row, col, release ? "release" : "press");
+
input_event(input_dev, EV_MSC, MSC_SCAN, code);
input_report_key(input_dev, keypad->keycodes[code], !release);
input_sync(input_dev);

enable_irq(keypad->irq);
-
- dev_dbg(&keypad->client->dev, "key[%d:%d] %s\n", row, col,
- (release ? "release" : "press"));
+ return IRQ_HANDLED;
}

-static irqreturn_t max7359_interrupt(int irq, void *dev_id)
+static irqreturn_t max7359_hardirq(int irq, void *dev_id)
{
struct max7359_keypad *keypad = dev_id;

- if (!work_pending(&keypad->work)) {
- disable_irq_nosync(keypad->irq);
- schedule_work(&keypad->work);
- }
-
- return IRQ_HANDLED;
+ disable_irq_nosync(keypad->irq);
+ return IRQ_WAKE_THREAD;
}

/*
@@ -223,7 +218,6 @@ static int __devinit max7359_probe(struct i2c_client *client,
keypad->client = client;
keypad->input_dev = input_dev;
keypad->irq = client->irq;
- INIT_WORK(&keypad->work, max7359_worker);

input_dev->name = client->name;
input_dev->id.bustype = BUS_I2C;
@@ -241,8 +235,9 @@ static int __devinit max7359_probe(struct i2c_client *client,

max7359_build_keycode(keypad, keymap_data);

- error = request_irq(keypad->irq, max7359_interrupt,
- IRQF_TRIGGER_LOW, client->name, keypad);
+ error = request_threaded_irq(keypad->irq,
+ max7359_hardirq, max7359_interrupt,
+ IRQF_TRIGGER_LOW, client->name, keypad);
if (error) {
dev_err(&client->dev, "failed to register interrupt\n");
goto failed_free_mem;
@@ -275,9 +270,8 @@ static int __devexit max7359_remove(struct i2c_client *client)
{
struct max7359_keypad *keypad = i2c_get_clientdata(client);

- cancel_work_sync(&keypad->work);
- input_unregister_device(keypad->input_dev);
free_irq(keypad->irq, keypad);
+ input_unregister_device(keypad->input_dev);
i2c_set_clientdata(client, NULL);
kfree(keypad);

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/