Re: [BISECTED] HP G7000 battery disappears after suspend

[Alan Jenkins]

On 7/11/09, Alan Jenkins <alan-jenkins@xxxxxxxxxxxxxx> wrote:
> Bartlomiej Zolnierkiewicz wrote:
>> On Friday 10 July 2009 10:44:15 Alan Jenkins wrote:
>>
>>> 2009/7/9 Rafael J. Wysocki <rjw@xxxxxxx>:
>>>
>>>> On Thursday 09 July 2009, Alan Jenkins wrote:
>>>>
>>>>> 2009/7/8 Bartlomiej Zolnierkiewicz <bzolnier@xxxxxxxxx>:
>>>>>
>>>>>> On Wednesday 08 July 2009 21:41:17 Rafael J. Wysocki wrote:
>>>>>>
>>>>>>> On Wednesday 08 July 2009, Alan Jenkins wrote:
>>>>>>>
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> I've borrowed this laptop for a few days.  Linux works pretty well,
>>>>>>>> but I found a problem on newer kernels.  After suspend it claims the
>>>>>>>> battery has been removed.  E.g. /proc/acpi/battery/BAT0/state claims
>>>>>>>> the battery is not present (but it is).
>>>>>>>>
>>>>>>>> I've attached acpidump and dmidecode output at
>>>>>>>> <http://bugzilla.kernel.org/show_bug.cgi?id=13745>.  I still have
>>>>>>>> access to the laptop for further tests, but only until Friday.
>>>>>>>>
>>>>>>>> I bisected it to the commit below.  Manually reverting the patch
>>>>>>>> fixes
>>>>>>>> the problem (in both 2.6.30 and 2.6.31-rc2).
>>>>>>>>
>>>>>>> Well, the commit below can't be reverted, because that would cause
>>>>>>> the boxes
>>>>>>> it fixed to stop working.
>>>>>>>
>>>>>>> Now, the only case this patch can make any difference is when the
>>>>>>> BIOS doesn't
>>>>>>> set SCI_EN before returning control the the kernel, which quite
>>>>>>> evidently is a
>>>>>>> BIOS bug.  The fact that the battery doesn't work with this patch
>>>>>>> applied means
>>>>>>> that the BIOS not only doesn't set SCI_EN, but also expects it to
>>>>>>> remain unset,
>>>>>>> which is insane.
>>>>>>>
>>>>>>> IMO this is a "won't fix", sorry.
>>>>>>>
>>>>>> Lets be pragmatic here..
>>>>>>
>>>>>> Besides this is a regression and we are already handling some such
>>>>>> insane
>>>>>> systems in STR case.  Moreover sending SMI ACPI_ENABLE command may
>>>>>> result in
>>>>>> some things happening behind our back and not only setting of SCI_EN
>>>>>> bit..
>>>>>>
>>>>>> PS Looking at the set_sci_en_on_resume quirk history it seems that if
>>>>>> we are
>>>>>> lucky we may may fix another issue (screaming IRQ one) at the same
>>>>>> time :)
>>>>>>
>>>>>> Alan, could you try this patch?
>>>>>>
>>>>>> ---
>>>>>> debug patch (needs to have both CONFIG_SUSPEND=y &
>>>>>> CONFIG_HIBERNATION=y)
>>>>>>
>>>>>>  drivers/acpi/sleep.c |   13 ++++++++++++-
>>>>>>  1 file changed, 12 insertions(+), 1 deletion(-)
>>>>>>
>>>>>> Index: b/drivers/acpi/sleep.c
>>>>>> ===================================================================
>>>>>> --- a/drivers/acpi/sleep.c
>>>>>> +++ b/drivers/acpi/sleep.c
>>>>>> @@ -383,6 +383,14 @@ static struct dmi_system_id __initdata a
>>>>>>                },
>>>>>>        },
>>>>>>        {
>>>>>> +       .callback = init_set_sci_en_on_resume,
>>>>>> +       .ident = "Hewlett-Packard HP G7000 Notebook PC",
>>>>>> +       .matches = {
>>>>>> +               DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
>>>>>> +               DMI_MATCH(DMI_PRODUCT_NAME, "HP G7000 Notebook PC"),
>>>>>> +               },
>>>>>> +       },
>>>>>> +       {
>>>>>>        .callback = init_old_suspend_ordering,
>>>>>>        .ident = "Panasonic CF51-2L",
>>>>>>        .matches = {
>>>>>>
>>>>> Thanks for coding this up for me in full.  It works, the battery now
>>>>> survives, and it does indeed remove the IRQ warning.
>>>>>
>>>> Great, thanks for testing, Bart, thanks for the patch!
>>>>
>>>> Len, can you add the Bart's patch to your 2.6.31 queue, please?
>>>>
>>>>
>>>>> I didn't test the hibernation hunk.  I have hibernation set up, but
>>>>> there is a different problem (not a regression).  I don't have much
>>>>> more time to investigate on this laptop, so I don't expect to get it
>>>>> fixed.  But here are some details anyway :-).
>>>>>
>>>>> When I run s2disk, it writes the image out, and then instantly
>>>>> resumes.  It doesn't seem to read the image, but neither does the
>>>>> kernel report an error:
>>>>>
>>>>> [  491.088802] ACPI: Preparing to enter system sleep state S4
>>>>> [  491.090498] PM: Saving platform NVS memory
>>>>> [  491.094638] Disabling non-boot CPUs ...
>>>>> [  491.094867] PM: Creating hibernation image:
>>>>> [  491.096015] PM: Need to copy 114990 pages
>>>>> [  491.096015] PM: Normal pages needed: 114990 + 1024 + 22, available
>>>>> pages: 144595
>>>>> [  491.096015] PM: Hibernation image created (114990 pages copied)
>>>>> [  491.096015] ACPI: Waking up from system sleep state S4
>>>>>
>>>>> It happens on 2.6.24-23-generic, 2.6.30, and 2.6.30-rc2.
>>>>>
>>>> Hmm.  Interesting.
>>>>
>>>> I _guess_ this problem is ACPI-related as well.  You can try putting
>>>> 'shutdown method = shutdown' into /etc/suspend.conf (or whatever the
>>>> s2disk's
>>>> configuration file is on your system).
>>>>
>>> That doesn't change anything.
>>>
>>>
>>>> If possible, it would be interesting to see if that also happens if
>>>> 'echo disk > /sys/power/state' is used to trigger hibernation instead of
>>>> s2disk.   In particular when booted with init=/bin/bash.
>>>>
>>> That worked, even though I didn't use init=/bin/bash.
>>>
>>> If it matters, I'm using a swap file on an NTFS partition.  [The
>>> system was installed by Ubuntu "Wubi" (i.e. using Windows partition
>>> and bootloader), but I had to set up both uswsusp and kernel swsusp
>>> myself.  pm-hibernate refuses to work; I don't think it knows about
>>> swap files].
>>>
>>> I noticed an error message, I'm not sure if it's relevant or not.
>>>
>>> Suspending using this method, I see two lines of ATA errors on the
>>> console when suspending.  They appear to be post-snapshot - they don't
>>> appear in the log - but it looks like the same error happens on resume
>>> too.  s2disk generates the same error on resume as well.
>>>
>>> [  192.247475] sd 0:0:0:0: [sda] Starting disk
>>> [  192.340428] ata4.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out
>>> [  192.340432] ata4.00: ACPI cmd ef/03:22:00:00:00:a0 filtered out
>>> [  192.372314] ata4.00: configured for MWDMA2
>>> [  192.640075] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>>> [  192.642338] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>>> [  192.644365] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
>>> [  192.644381] ata1.00: configured for UDMA/100
>>> * [  192.660076] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9
>>> t4
>>> * [  192.660079] ata1: irq_stat 0x00400040, connection status changed
>>> [  192.663198] ata1.00: configured for UDMA/100
>>> [  192.663201] ata1: EH complete
>>>
>>> The lines marked with * are the ones that appear on the console during
>>> suspend.  This happens on both 2.6.31-rc2 and 2.6.30.
>>>
>>
>> BTW Did you have a chance to test the second part of the original patch?
>>
>> [ Rafal, what do we want to do with it?  It seems logical to have the same
>>   behavior w.r.t. SCI_EN bit both when leaving S3 and S4 but I haven't yet
>>   verified this with the spec (is the ACPI is enabled on leaving the state
>>   assumption also valid for S4 or only for S0-S3?) and the change itself
>>   would require some more time in linux-next if we decide to go this way..
>> ]
>>
>
> I got hibernation working without the second part (and the battery was
> fine).  I'll try that hunk today and see if it breaks.

It still works with the second half of the patch applied.

Alan
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/