Re: [PATCH 1/1] DMI: fix dmi_get_year year parsing

[Matthias Pfaller]

Jiri Slaby wrote:
> On 07/08/2009 08:46 AM, Matthias Pfaller wrote:
> > Jiri Slaby wrote:
> > > Don't guess a year number base. Use 10 instead, since year may
> > > be 2-digit starting with 0, so that we would end up in base equal
> > > to 8.
> > >
> > > Signed-off-by: Jiri Slaby <jirislaby@xxxxxxxxx>
> > > Reported-by: Matthias Pfaller <leo@xxxxxxxx>
> > > ---
> > >  drivers/firmware/dmi_scan.c |    2 +-
> > >  1 files changed, 1 insertions(+), 1 deletions(-)
> > >
> > > diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c
> > > index 6071078..8fe0f6e 100644
> > > --- a/drivers/firmware/dmi_scan.c
> > > +++ b/drivers/firmware/dmi_scan.c
> > > @@ -611,7 +611,7 @@ int dmi_get_year(int field)
> > >          return 0;
> > >  
> > >      s += 1;
> > > -    year = simple_strtoul(s, NULL, 0);
> > > +    year = simple_strtoul(s, NULL, 10);
> > >      if (year && year < 100) {    /* 2-digit year */
> > >          year += 1900;
> > >          if (year < 1996)    /* no dates < spec 1.0 */
> > I just noticed, that this is not enough, because this will still fail
> > for xxx/xx/00. I suggest the following patch:
>
> Actually the patch below is not correct. Standard says consider xx/xx/yy
> as 19yy, not 20yy.
>
> BTW. the patch above is not useful, reporting 1908 and 1909 as a year is
> almost the same as 1900.

Sorry, I don't understand. simple_strtoul will return 8 for my bios. So
1900 will get added resulting in 1908 (as you said). But because 1908 is 
still less than 1996 now 100 will get added which results in 2008 which 
is what I need.

> Do you have such a broken BIOS?

Yes. Its on an etx-cd, an embedded board from kontron. dmidecode output:

Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
        Vendor: Phoenix Technologies LTD
        Version: MCALR116
        Release Date: 08/13/08
        Address: 0xE3F90
        Runtime Size: 114800 bytes
        ROM Size: 1024 kB
        Characteristics:
                ISA is supported
                PCI is supported
                PC Card (PCMCIA) is supported
                PNP is supported
                BIOS is upgradeable
                BIOS shadowing is allowed
                ESCD support is available
                Boot from CD is supported
                ACPI is supported
                USB legacy is supported
                BIOS boot specification is supported

Our systems started to fail after we got boards with a newer bios from 
our supplier...

> > --- drivers/firmware/dmi_scan.c.bak     Wed Jul  8 02:42:04 2009
> > +++ drivers/firmware/dmi_scan.c Wed Jul  8 02:42:17 2009
> > @@ -360,12 +360,15 @@
> >                 return 0;
> >
> >         s += 1;
> > -       year = simple_strtoul(s, NULL, 0);
> > -       if (year && year < 100) {       /* 2-digit year */
> > -               year += 1900;
> > -               if (year < 1996)        /* no dates < spec 1.0 */
> > -                       year += 100;
> > +       if (s[0] == '0' && s[1] == '0' && s[2] == '\0') {
> > +               year = 2000;
> > +       } else {
> > +               year = simple_strtoul(s, NULL, 10);
> > +               if (year && year < 100) {       /* 2-digit year */
> > +                       year += 1900;
> > +                       if (year < 1996)        /* no dates < spec 1.0 */
> > +                               year += 100;
> > +               }
> >         }
> > -
> >         return year;
> >  }


--
Matthias Pfaller                          Software Entwicklung
marco Systemanalyse und Entwicklung GmbH  Tel   +49 8131 5161 41
Hans-Böckler-Str. 2, D 85221 Dachau       Fax   +49 8131 5161 66
http://www.marco.de/                      Email leo@xxxxxxxx
Geschäftsführer Martin Reuter             HRB 171775 Amtsgericht München
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/