[PATCH 09/23] x86/oprofile: remove MSR macros for AMD cpus

From: Robert Richter
Date: Fri Jun 12 2009 - 09:03:51 EST


The macros CTRL_READ() and CTRL_WRITE() make the code hard to read and
maintain. This patch replaces them by rdmsr()/wrmsr() functions and
simplifies the code.

Signed-off-by: Robert Richter <robert.richter@xxxxxxx>
---
arch/x86/oprofile/op_model_amd.c | 29 ++++++++++++-----------------
1 files changed, 12 insertions(+), 17 deletions(-)

diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c
index 4b9254a..c6181c2 100644
--- a/arch/x86/oprofile/op_model_amd.c
+++ b/arch/x86/oprofile/op_model_amd.c
@@ -26,12 +26,7 @@
#define NUM_COUNTERS 4
#define NUM_CONTROLS 4

-#define CTR_READ(l, h, msrs, c) do {rdmsr(msrs->counters[(c)].addr, (l), (h)); } while (0)
-#define CTR_WRITE(l, msrs, c) do {wrmsr(msrs->counters[(c)].addr, -(unsigned int)(l), -1); } while (0)
#define CTR_OVERFLOWED(n) (!((n) & (1U<<31)))
-
-#define CTRL_READ(l, h, msrs, c) do {rdmsr(msrs->controls[(c)].addr, (l), (h)); } while (0)
-#define CTRL_WRITE(l, h, msrs, c) do {wrmsr(msrs->controls[(c)].addr, (l), (h)); } while (0)
#define CTRL_CLEAR_LO(x) (x &= (1<<21))
#define CTRL_CLEAR_HI(x) (x &= 0xfffffcf0)
#define CTRL_SET_EVENT_LOW(val, e) (val |= (e & 0xff))
@@ -101,17 +96,17 @@ static void op_amd_setup_ctrs(struct op_msrs const * const msrs)
for (i = 0 ; i < NUM_CONTROLS; ++i) {
if (unlikely(!CTRL_IS_RESERVED(msrs, i)))
continue;
- CTRL_READ(low, high, msrs, i);
+ rdmsr(msrs->controls[i].addr, low, high);
CTRL_CLEAR_LO(low);
CTRL_CLEAR_HI(high);
- CTRL_WRITE(low, high, msrs, i);
+ wrmsr(msrs->controls[i].addr, low, high);
}

/* avoid a false detection of ctr overflows in NMI handler */
for (i = 0; i < NUM_COUNTERS; ++i) {
if (unlikely(!CTR_IS_RESERVED(msrs, i)))
continue;
- CTR_WRITE(1, msrs, i);
+ wrmsr(msrs->counters[i].addr, -1, -1);
}

/* enable active counters */
@@ -119,9 +114,9 @@ static void op_amd_setup_ctrs(struct op_msrs const * const msrs)
if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) {
reset_value[i] = counter_config[i].count;

- CTR_WRITE(counter_config[i].count, msrs, i);
+ wrmsr(msrs->counters[i].addr, -(unsigned int)counter_config[i].count, -1);

- CTRL_READ(low, high, msrs, i);
+ rdmsr(msrs->controls[i].addr, low, high);
CTRL_CLEAR_LO(low);
CTRL_CLEAR_HI(high);
CTRL_SET_ENABLE(low);
@@ -133,7 +128,7 @@ static void op_amd_setup_ctrs(struct op_msrs const * const msrs)
CTRL_SET_HOST_ONLY(high, 0);
CTRL_SET_GUEST_ONLY(high, 0);

- CTRL_WRITE(low, high, msrs, i);
+ wrmsr(msrs->controls[i].addr, low, high);
} else {
reset_value[i] = 0;
}
@@ -267,10 +262,10 @@ static int op_amd_check_ctrs(struct pt_regs * const regs,
for (i = 0 ; i < NUM_COUNTERS; ++i) {
if (!reset_value[i])
continue;
- CTR_READ(low, high, msrs, i);
+ rdmsr(msrs->counters[i].addr, low, high);
if (CTR_OVERFLOWED(low)) {
oprofile_add_sample(regs, i);
- CTR_WRITE(reset_value[i], msrs, i);
+ wrmsr(msrs->counters[i].addr, -(unsigned int)reset_value[i], -1);
}
}

@@ -286,9 +281,9 @@ static void op_amd_start(struct op_msrs const * const msrs)
int i;
for (i = 0 ; i < NUM_COUNTERS ; ++i) {
if (reset_value[i]) {
- CTRL_READ(low, high, msrs, i);
+ rdmsr(msrs->controls[i].addr, low, high);
CTRL_SET_ACTIVE(low);
- CTRL_WRITE(low, high, msrs, i);
+ wrmsr(msrs->controls[i].addr, low, high);
}
}

@@ -307,9 +302,9 @@ static void op_amd_stop(struct op_msrs const * const msrs)
for (i = 0 ; i < NUM_COUNTERS ; ++i) {
if (!reset_value[i])
continue;
- CTRL_READ(low, high, msrs, i);
+ rdmsr(msrs->controls[i].addr, low, high);
CTRL_SET_INACTIVE(low);
- CTRL_WRITE(low, high, msrs, i);
+ wrmsr(msrs->controls[i].addr, low, high);
}

op_amd_stop_ibs();
--
1.6.3.1


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/