[PATCH] regulator/max1586: support increased V3 voltage range

[Philipp Zabel]

The V3 regulator can be configured with an external resistor
connected to the feedback pin (R24 in the data sheet) to
increase the voltage range.

For example, hx4700 has R24 = 3.32 kOhm to achieve a maximum
V3 voltage of 1.55 V which is needed for 624 MHz CPU frequency.

Signed-off-by: Philipp Zabel <philipp.zabel@xxxxxxxxx>
---
 drivers/regulator/max1586.c       |   75 ++++++++++++++++++++++++++++---------
 include/linux/regulator/max1586.h |    7 +++
 2 files changed, 64 insertions(+), 18 deletions(-)

diff --git a/drivers/regulator/max1586.c b/drivers/regulator/max1586.c
index bbbb55f..db11099 100644
--- a/drivers/regulator/max1586.c
+++ b/drivers/regulator/max1586.c
@@ -27,43 +27,56 @@
 #define MAX1586_V3_MAX_VSEL 31
 #define MAX1586_V6_MAX_VSEL 3
 
-#define MAX1586_V3_MIN_UV   700000
-#define MAX1586_V3_MAX_UV  1475000
-#define MAX1586_V3_STEP_UV   25000
-
 #define MAX1586_V6_MIN_UV        0
 #define MAX1586_V6_MAX_UV  3000000
 
 #define I2C_V3_SELECT (0 << 5)
 #define I2C_V6_SELECT (1 << 5)
 
+struct max1586_data {
+	struct i2c_client *client;
+
+	/* min/max V3 voltage */
+	int min_uV;
+	int max_uV;
+};
+
 /*
  * V3 voltage
  * On I2C bus, sending a "x" byte to the max1586 means :
- *   set V3 to 0.700V + (x & 0x1f) * 0.025V
+ *   set V3 to 0.700V + (x & 0x1f) * 0.025V,
+ *   set V3 to 0.730V + (x & 0x1f) * 0.026V,
+ *   set V3 to 0.750V + (x & 0x1f) * 0.027V or
+ *   set V3 to 0.780V + (x & 0x1f) * 0.028V
+ * depending on the external resistance R24.
  */
-static int max1586_v3_calc_voltage(unsigned selector)
+static int max1586_v3_calc_voltage(struct max1586_data *max1586,
+	unsigned selector)
 {
-	return MAX1586_V3_MIN_UV + (MAX1586_V3_STEP_UV * selector);
+	unsigned range_uV = max1586->max_uV - max1586->min_uV;
+
+	return max1586->min_uV + (selector * range_uV / 31);
 }
 
 static int max1586_v3_set(struct regulator_dev *rdev, int min_uV, int max_uV)
 {
-	struct i2c_client *client = rdev_get_drvdata(rdev);
+	struct max1586_data *max1586 = rdev_get_drvdata(rdev);
+	struct i2c_client *client = max1586->client;
+	unsigned range_uV = max1586->max_uV - max1586->min_uV;
 	unsigned selector;
 	u8 v3_prog;
 
-	if (min_uV < MAX1586_V3_MIN_UV || min_uV > MAX1586_V3_MAX_UV)
-		return -EINVAL;
-	if (max_uV < MAX1586_V3_MIN_UV || max_uV > MAX1586_V3_MAX_UV)
+	if (min_uV > max1586->max_uV || max_uV < max1586->min_uV)
 		return -EINVAL;
+	if (min_uV < max1586->min_uV)
+		min_uV = max1586->min_uV;
 
-	selector = (min_uV - MAX1586_V3_MIN_UV) / MAX1586_V3_STEP_UV;
-	if (max1586_v3_calc_voltage(selector) > max_uV)
+	selector = (min_uV - max1586->min_uV) * 31 / range_uV;
+	if (max1586_v3_calc_voltage(max1586, selector) > max_uV)
 		return -EINVAL;
 
 	dev_dbg(&client->dev, "changing voltage v3 to %dmv\n",
-		max1586_v3_calc_voltage(selector) / 1000);
+		max1586_v3_calc_voltage(max1586, selector) / 1000);
 
 	v3_prog = I2C_V3_SELECT | (u8) selector;
 	return i2c_smbus_write_byte(client, v3_prog);
@@ -71,9 +84,11 @@ static int max1586_v3_set(struct regulator_dev *rdev, int min_uV, int max_uV)
 
 static int max1586_v3_list(struct regulator_dev *rdev, unsigned selector)
 {
+	struct max1586_data *max1586 = rdev_get_drvdata(rdev);
+
 	if (selector > MAX1586_V3_MAX_VSEL)
 		return -EINVAL;
-	return max1586_v3_calc_voltage(selector);
+	return max1586_v3_calc_voltage(max1586, selector);
 }
 
 /*
@@ -164,12 +179,33 @@ static int max1586_pmic_probe(struct i2c_client *client,
 {
 	struct regulator_dev **rdev;
 	struct max1586_platform_data *pdata = client->dev.platform_data;
-	int i, id, ret = 0;
+	struct max1586_data *max1586;
+	int i, id, ret = -ENOMEM;
 
 	rdev = kzalloc(sizeof(struct regulator_dev *) * (MAX1586_V6 + 1),
 		       GFP_KERNEL);
 	if (!rdev)
-		return -ENOMEM;
+		goto out;
+
+	max1586 = kzalloc(sizeof(struct max1586_data *), GFP_KERNEL);
+	if (!max1586)
+		goto out_unmap;
+
+	max1586->client = client;
+	switch (pdata->r24) {
+	case MAX1586_R24_3k32:
+		max1586->min_uV = 730000;
+		max1586->max_uV = 1550000;
+		break;
+	case MAX1586_R24_5k11:
+		max1586->min_uV = 750000;
+		max1586->max_uV = 1600000;
+		break;
+	case MAX1586_R24_7k5:
+		max1586->min_uV = 780000;
+		max1586->max_uV = 1650000;
+		break;
+	}
 
 	ret = -EINVAL;
 	for (i = 0; i < pdata->num_subdevs && i <= MAX1586_V6; i++) {
@@ -182,7 +218,7 @@ static int max1586_pmic_probe(struct i2c_client *client,
 		}
 		rdev[i] = regulator_register(&max1586_reg[id], &client->dev,
 					     pdata->subdevs[i].platform_data,
-					     client);
+					     max1586);
 		if (IS_ERR(rdev[i])) {
 			ret = PTR_ERR(rdev[i]);
 			dev_err(&client->dev, "failed to register %s\n",
@@ -198,7 +234,10 @@ static int max1586_pmic_probe(struct i2c_client *client,
 err:
 	while (--i >= 0)
 		regulator_unregister(rdev[i]);
+	kfree(max1586);
+out_unmap:
 	kfree(rdev);
+out:
 	return ret;
 }
 
diff --git a/include/linux/regulator/max1586.h b/include/linux/regulator/max1586.h
index 2056973..cdf2010 100644
--- a/include/linux/regulator/max1586.h
+++ b/include/linux/regulator/max1586.h
@@ -26,6 +26,10 @@
 #define MAX1586_V3 0
 #define MAX1586_V6 1
 
+#define MAX1586_R24_3k32 3320
+#define MAX1586_R24_5k11 5110
+#define MAX1586_R24_7k5  7500
+
 /**
  * max1586_subdev_data - regulator data
  * @id: regulator Id (either MAX1586_V3 or MAX1586_V6)
@@ -43,10 +47,13 @@ struct max1586_subdev_data {
  * @num_subdevs: number of regultors used (may be 1 or 2)
  * @subdevs: regulator used
  *           At most, there will be a regulator for V3 and one for V6 voltages.
+ * @r24: external regulator to increase V3 range
+ *       (0, MAX1586_R24_3k32, MAX1586_R24_5k11 or MAX1586_R24_7k5)
  */
 struct max1586_platform_data {
 	int num_subdevs;
 	struct max1586_subdev_data *subdevs;
+	int r24;
 };
 
 #endif
-- 
1.6.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/