Who's responsible for configuring CLS on a cardbus device?

[Tejun Heo]

Hello,

This is regarding bko#13257.

 http://bugzilla.kernel.org/show_bug.cgi?id=13257

towerlexa@xxxxxx was experiencing very slow transfer rate when using a
cardbus sata_sil SATA controller which is known to be sensitive to
cache line size setting.  The reset default is zero and no one
configured it causing poor performance.

This is solvable by simply setting CLS to the correct value but who's
job is it?  For non-hotplug devices, this is configured by the BIOS
(at least on PC), so for hotplug devices I think falls on the lap of
the PCI code but I'm not sure.  If this is something which the
sata_sil driver should be responsible for, is there an established way
to determine the proper CLS value?

Thanks.

-- 
tejun
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/