Re: [PATCH] [PowerPC] MPC8272ADS: fix device tree for 8 MB flash size

From: Li Yang
Date: Wed May 13 2009 - 06:28:26 EST


On Wed, May 13, 2009 at 3:06 AM, Wolfgang Denk <wd@xxxxxxx> wrote:
> The current device tree for the MPC8272ADS assumes a mapping of 32 MB
> of NOR flash at 0xFE00.0000, while there are actually only 8 MB on
> the boards, mapped at 0xFF80.0000. When booting an uImage with such a
> device tree, the kernel crashes because 0xFE00.0000 is not mapped.
>
> Also introduce aliases for serial[01] and ethernet[01].
>
> Signed-off-by: Wolfgang Denk <wd@xxxxxxx>
> Cc: Scott Wood <scottwood@xxxxxxxxxxxxx>
> cc: Kumar Gala <galak@xxxxxxxxxxxxxxxxxxx>
> ---
> I am not really sure what the typical flash size on MPC8272ADS boards
> is. The board I used for testing is marked as "Prototype", so it may
> not be the release configuration. On the other hand, the manual also
> says 8 MB, Vitaly Borduk confirms 8 MB on his board, too, and Scott
> Wood eventually tested only with cuImage which fixes up the localbus
> mappings, thus eventually concealing the issue.

The latest reference board I got also has an 8MB SIMM flash module
shipped in the box.

>
> I'm posting this as reference in case the 8 MB should turn out to be
> correct. -- wd

Although 8MB seems to be the common size used. It can be very easy
changed as a pluggable module. It might be better to make the code
working for any reasonable flash sizes.

- Leo
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/