Re: [2.6.30-rc2] CD-R: wodim intermittent failures: [sr0] Add. Sense: Logical block address out of range, sector 0

[Robert Hancock]

On Tue, May 12, 2009 at 7:00 PM, Andy Isaacson <adi@xxxxxxxxxxxxx> wrote:
> On Tue, May 12, 2009 at 05:23:57PM -0600, Robert Hancock wrote:
>> >Looking at hald/linux/addons/addon-storage.c it does appear to
>> >open(O_EXCL) as well, so perhaps the O_EXCL multiple-open logic broke
>> >recently?
>> >
>> >Complete dmesg, kconfig, and so on at
>> >
>> >http://web.hexapodia.org/~adi/sysinfo/1242164411_cvpe4300_2.6.30-rc5-dmar-00096-ga4d7749/
>>
>> I'm not sure how this is supposed to work. The only place I can see any
>> O_EXCL handling is in the sg driver. But if you access the sr device
>> directly, it doesn't seem like that would have any effect.
>>
>> CCing linux-scsi. Could be there's a bad user-space assumption here, or
>> something.
>
> Perhaps, I haven't tracked down exactly what the difference in behavior
> between working 2.6.29 and broken 2.6.30-rc2 is.  It seems like the disk
> spins up more often (in response to hal background probes presumably)
> with 30-rc2 than it did before, and running "udevadm monitor" I do see
> the following repeated "change" events happening, even on an idle
> system:
>
> KERNEL[1242175547.793029] change   /devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0 (scsi)
> KERNEL[1242175547.794669] change   /devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0 (block)
> UDEV  [1242175547.794912] change   /devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0 (scsi)
> UDEV  [1242175547.888539] change   /devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0 (block)
> KERNEL[1242175673.309129] change   /devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0 (scsi)
> KERNEL[1242175673.310775] change   /devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0 (block)
> UDEV  [1242175673.311013] change   /devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0 (scsi)
> UDEV  [1242175674.658718] change   /devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0 (block)
> KERNEL[1242175690.227604] change   /devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0 (scsi)
> KERNEL[1242175690.229730] change   /devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0 (block)
> UDEV  [1242175690.229960] change   /devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0 (scsi)
> UDEV  [1242175714.060440] change   /devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0 (block)
> KERNEL[1242175727.909819] change   /devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0 (scsi)
> KERNEL[1242175727.911356] change   /devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0 (block)
> UDEV  [1242175727.911690] change   /devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0 (scsi)
> UDEV  [1242175727.987747] change   /devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0 (block)
> KERNEL[1242175731.591853] change   /devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0 (scsi)
> KERNEL[1242175731.593541] change   /devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sr0 (block)
>
> I've verified that O_EXCL works at least with a trivial test program, so
> it's not simply that EXCL broke.
>
> Also I've verified with strace that hald-addon-storage and wodim are
> both using O_EXCL, and that hald-addon-storage gets EBUSY while wodim is
> writing the disk.  (The straced run didn't fail, unfortunately.)

Those events seem rather suspicious. Hmm:

[    2.770959] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-U633A, D200, max
UDMA/100, ATAPI AN

Did libata report it was using ATAPI AN in 2.6.29?

You could try bisecting to see if you can find which patch started
triggering those spurious events..
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/