Re: [PATCH 3/4] gcov: add gcov profiling infrastructure

From: Ingo Molnar
Date: Thu May 07 2009 - 09:47:58 EST



* Peter Oberparleiter <oberpar@xxxxxxxxxxxxxxxxxx> wrote:

[...]
> Index: linux-2.6.30-rc4/init/main.c
> ===================================================================
> --- linux-2.6.30-rc4.orig/init/main.c
> +++ linux-2.6.30-rc4/init/main.c
> @@ -77,6 +77,14 @@
> #include <asm/smp.h>
> #endif
>
> +#ifdef CONFIG_GCOV_KERNEL
> +
> +#if (__GNUC__ < 3) || (__GNUC__ == 3) && (__GNUC_MINOR__ < 4)
> +#error "GCOV profiling support for gcc versions below 3.4 not included"
> +#endif /* __GNUC__ */
> +
> +#endif /* CONFIG_GCOV_KERNEL */

Compiler support assertions are typically done in
include/linux/compiler*.h. They used to be in init/main.c up until
recently but we moved them out of there.

> +
> static int kernel_init(void *);
>
> extern void init_IRQ(void);
> Index: linux-2.6.30-rc4/kernel/Makefile
> ===================================================================
> --- linux-2.6.30-rc4.orig/kernel/Makefile
> +++ linux-2.6.30-rc4/kernel/Makefile
> @@ -70,6 +70,7 @@ obj-$(CONFIG_STOP_MACHINE) += stop_machi
> obj-$(CONFIG_KPROBES_SANITY_TEST) += test_kprobes.o
> obj-$(CONFIG_AUDIT) += audit.o auditfilter.o
> obj-$(CONFIG_AUDITSYSCALL) += auditsc.o
> +obj-$(CONFIG_GCOV_KERNEL) += gcov/
> obj-$(CONFIG_AUDIT_TREE) += audit_tree.o
> obj-$(CONFIG_KPROBES) += kprobes.o
> obj-$(CONFIG_KGDB) += kgdb.o
> Index: linux-2.6.30-rc4/kernel/gcov/Kconfig
> ===================================================================
> --- /dev/null
> +++ linux-2.6.30-rc4/kernel/gcov/Kconfig
> @@ -0,0 +1,48 @@
> +menu "GCOV-based kernel profiling"
> +
> +config GCOV_KERNEL
> + bool "Enable gcov-based kernel profiling"
> + depends on DEBUG_FS && CONSTRUCTORS
> + default n
> + ---help---
> + This option enables gcov-based code profiling (e.g. for code coverage
> + measurements).
> +
> + If unsure, say N.
> +
> + Additionally specify CONFIG_GCOV_PROFILE_ALL=y to get profiling data
> + for the entire kernel. To enable profiling for specific files or
> + directories, add a line similar to the following to the respective
> + Makefile:
> +
> + For a single file (e.g. main.o):
> + GCOV_PROFILE_main.o := y
> +
> + For all files in one directory:
> + GCOV_PROFILE := y
> +
> + To exclude files from being profiled even when CONFIG_GCOV_PROFILE_ALL
> + is specified, use:
> +
> + GCOV_PROFILE_main.o := n
> + and:
> + GCOV_PROFILE := n
> +
> + Note that the debugfs filesystem has to be mounted to access
> + profiling data.
> +
> +config GCOV_PROFILE_ALL
> + bool "Profile entire Kernel"
> + depends on GCOV_KERNEL
> + depends on S390 || X86_32
> + default n
> + ---help---
> + This options activates profiling for the entire kernel.
> +
> + If unsure, say N.
> +
> + Note that a kernel compiled with profiling flags will be significantly
> + larger and run slower. Also be sure to exclude files from profiling
> + which are not linked to the kernel image to prevent linker errors.
> +
> +endmenu
> Index: linux-2.6.30-rc4/kernel/gcov/Makefile
> ===================================================================
> --- /dev/null
> +++ linux-2.6.30-rc4/kernel/gcov/Makefile
> @@ -0,0 +1,3 @@
> +EXTRA_CFLAGS := -DSRCTREE='"$(srctree)"' -DOBJTREE='"$(objtree)"'
> +
> +obj-$(CONFIG_GCOV_KERNEL) := base.o fs.o gcc_3_4.o
> Index: linux-2.6.30-rc4/kernel/gcov/base.c
> ===================================================================
> --- /dev/null
> +++ linux-2.6.30-rc4/kernel/gcov/base.c
> @@ -0,0 +1,145 @@
> +/*
> + * This code maintains a list of active profiling data structures.
> + *
> + * Copyright IBM Corp. 2009
> + * Author(s): Peter Oberparleiter <oberpar@xxxxxxxxxxxxxxxxxx>
> + *
> + * Uses gcc-internal data definitions.
> + * Based on the gcov-kernel patch by:
> + * Hubertus Franke <frankeh@xxxxxxxxxx>
> + * Nigel Hinds <nhinds@xxxxxxxxxx>
> + * Rajan Ravindran <rajancr@xxxxxxxxxx>
> + * Peter Oberparleiter <oberpar@xxxxxxxxxxxxxxxxxx>
> + * Paul Larson
> + */
> +
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/syscalls.h>
> +#include "gcov.h"
> +
> +static struct gcov_info *gcov_info_head;
> +static int gcov_events_enabled;
> +static DEFINE_MUTEX(gcov_lock);
> +
> +/* __gcov_init is called by gcc-generated constructor code for each object
> + * file compiled with -fprofile-arcs. */

Please use standard multi-line comments like specified in
Documentation/CodingStyle. This observation holds for basically all
the comment blocks in this file - dozens of them.

> +void __gcov_init(struct gcov_info *info)
> +{
> + static unsigned int gcov_version;
> +
> + mutex_lock(&gcov_lock);
> + if (gcov_version == 0) {
> + gcov_version = info->version;
> + /* Printing gcc's version magic may prove useful for debugging
> + * incompatibility reports. */
> + printk(KERN_INFO TAG "version magic: 0x%x\n", gcov_version);
> + }
> + /* Add new profiling data structure to list and inform event
> + * listener. */
> + info->next = gcov_info_head;
> + gcov_info_head = info;
> + if (gcov_events_enabled)
> + gcov_event(gcov_add, info);
> + mutex_unlock(&gcov_lock);
> +}
> +EXPORT_SYMBOL(__gcov_init);
> +
> +/* These functions may be referenced by gcc-generated profiling code but serve
> + * no function for kernel profiling. */
> +void __gcov_flush(void)
> +{
> + /* Unused. */
> +}
> +EXPORT_SYMBOL(__gcov_flush);

Please turn these into GPL exports. We dont want binary-only crap to
learn to depend on one more kernel-internal detail in an ABI
fashion.

> +void __gcov_merge_add(gcov_type *counters, unsigned int n_counters)
> +{
> + /* Unused. */
> +}
> +EXPORT_SYMBOL(__gcov_merge_add);
> +
> +void __gcov_merge_single(gcov_type *counters, unsigned int n_counters)
> +{
> + /* Unused. */
> +}
> +EXPORT_SYMBOL(__gcov_merge_single);
> +
> +void __gcov_merge_delta(gcov_type *counters, unsigned int n_counters)
> +{
> + /* Unused. */
> +}
> +EXPORT_SYMBOL(__gcov_merge_delta);
> +
> +int __gcov_execve(const char *path, char *const argv[], char *const envp[])
> +{
> + return kernel_execve(path, argv, envp);
> +}
> +EXPORT_SYMBOL(__gcov_execve);
> +
> +/**
> + * gcov_enable_events - enable event reporting through gcov_event()
> + *
> + * Turn on reporting of profiling data load/unload-events through the
> + * gcov_event() callback. Also replay all previous events once. This function
> + * is needed because some events are potentially generated too early for the
> + * callback implementation to handle them initially.
> + */
> +void gcov_enable_events(void)
> +{
> + struct gcov_info *info;
> +
> + mutex_lock(&gcov_lock);
> + gcov_events_enabled = 1;
> + /* Perform event callback for previously registered entries. */
> + for (info = gcov_info_head; info; info = info->next)
> + gcov_event(gcov_add, info);
> + mutex_unlock(&gcov_lock);
> +}
> +
> +static inline int within(void *addr, void *start, unsigned long size)
> +{
> + return ((addr >= start) && (addr < start + size));
> +}

this should be factored out into a generic helper in
include/linux/kernel.h.

> +
> +/* Update list and generate events when modules are unloaded. */
> +static int gcov_module_notifier(struct notifier_block *nb, unsigned long event,
> + void *data)
> +{
> +#ifdef CONFIG_MODULES
> + struct module *mod = data;
> + struct gcov_info *info;
> + struct gcov_info *prev;
> +
> + if (event != MODULE_STATE_GOING)
> + return NOTIFY_OK;
> + mutex_lock(&gcov_lock);
> + prev = NULL;
> + /* Remove entries located in module from linked list. */
> + for (info = gcov_info_head; info; info = info->next) {
> + if (within(info, mod->module_core, mod->core_size)) {
> + if (prev)
> + prev->next = info->next;
> + else
> + gcov_info_head = info->next;
> + if (gcov_events_enabled)
> + gcov_event(gcov_remove, info);
> + } else
> + prev = info;
> + }
> + mutex_unlock(&gcov_lock);
> +#endif /* CONFIG_MODULES */
> +
> + return NOTIFY_OK;
> +}
> +
> +static struct notifier_block gcov_nb = {
> + .notifier_call = gcov_module_notifier,
> +};
> +
> +static int __init gcov_init(void)
> +{
> + return register_module_notifier(&gcov_nb);
> +}
> +device_initcall(gcov_init);

this whole block could move under CONFIG_MODULES.


> Index: linux-2.6.30-rc4/kernel/gcov/fs.c
> ===================================================================
> --- /dev/null
> +++ linux-2.6.30-rc4/kernel/gcov/fs.c
> @@ -0,0 +1,634 @@
> +/*
> + * This code exports profiling data as debugfs files to userspace.
> + *
> + * Copyright IBM Corp. 2009
> + * Author(s): Peter Oberparleiter <oberpar@xxxxxxxxxxxxxxxxxx>
> + *
> + * Uses gcc-internal data definitions.
> + * Based on the gcov-kernel patch by:
> + * Hubertus Franke <frankeh@xxxxxxxxxx>
> + * Nigel Hinds <nhinds@xxxxxxxxxx>
> + * Rajan Ravindran <rajancr@xxxxxxxxxx>
> + * Peter Oberparleiter <oberpar@xxxxxxxxxxxxxxxxxx>
> + * Paul Larson
> + * Yi CDL Yang
> + */
> +
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/debugfs.h>
> +#include <linux/fs.h>
> +#include <linux/list.h>
> +#include <linux/string.h>
> +#include <linux/slab.h>
> +#include <linux/mutex.h>
> +#include <linux/seq_file.h>
> +#include "gcov.h"
> +
> +/**
> + * struct gcov_node - represents a debugfs entry
> + * @list: list head for child node list
> + * @children: child nodes
> + * @all: list head for list of all nodes
> + * @parent: parent node
> + * @info: associated profiling data structure if not a directory
> + * @ghost: when an object file containing profiling data is unloaded we keep a
> + * copy of the profiling data here to allow collecting coverage data
> + * for cleanup code. Such a node is called a "ghost".
> + * @dentry: main debugfs entry, either a directory or data file
> + * @links: associated symbolic links
> + * @name: data file basename
> + *
> + * struct gcov_node represents an entity within the gcov/ subdirectory
> + * of debugfs. There are directory and data file nodes. The latter represent
> + * the actual synthesized data file plus any associated symbolic links which
> + * are needed by the gcov tool to work correctly.
> + */
> +struct gcov_node {
> + struct list_head list;
> + struct list_head children;
> + struct list_head all;
> + struct gcov_node *parent;
> + struct gcov_info *info;
> + struct gcov_info *ghost;
> + struct dentry *dentry;
> + struct dentry **links;
> + char name[0];
> +};
> +
> +static const char objtree[] = OBJTREE;
> +static const char srctree[] = SRCTREE;
> +static struct gcov_node root_node;
> +static struct dentry *reset_dentry;
> +static LIST_HEAD(all_head);
> +static DEFINE_MUTEX(node_lock);
> +
> +/* If non-zero, keep copies of profiling data for unloaded modules. */
> +static int gcov_persist = 1;
> +
> +static int __init gcov_persist_setup(char *str)
> +{
> + int val;
> + char delim;
> +
> + if (sscanf(str, "%d %c", &val, &delim) != 1) {
> + printk(KERN_WARNING TAG "invalid gcov_persist parameter '%s'\n",
> + str);
> + return 0;
> + }
> + printk(KERN_INFO TAG "setting gcov_persist to %d\n", val);
> + gcov_persist = val;
> +
> + return 1;
> +}
> +__setup("gcov_persist=", gcov_persist_setup);
> +
> +/* seq_file.start() implementation for gcov data files. Note that the
> + * gcov_iterator interface is designed to be more restrictive than seq_file
> + * (no start from arbitrary position, etc.), to simplify the iterator
> + * implementation. */
> +static void *gcov_seq_start(struct seq_file *seq, loff_t *pos)
> +{
> + loff_t i;
> +
> + gcov_iter_start(seq->private);
> + for (i = 0; i < *pos; i++)
> + if (gcov_iter_next(seq->private))
> + return NULL;

Please use curly braces for multi-line loop bodies.

> +
> + return seq->private;
> +}
> +
> +/* seq_file.next() implementation for gcov data files. */
> +static void *gcov_seq_next(struct seq_file *seq, void *data, loff_t *pos)
> +{
> + struct gcov_iterator *iter = data;
> +
> + if (gcov_iter_next(iter))
> + return NULL;
> + (*pos)++;
> +
> + return iter;
> +}
> +
> +/* seq_file.show() implementation for gcov data files. */
> +static int gcov_seq_show(struct seq_file *seq, void *data)
> +{
> + struct gcov_iterator *iter = data;
> +
> + if (gcov_iter_write(iter, seq))
> + return -EINVAL;
> + return 0;
> +}
> +
> +static void gcov_seq_stop(struct seq_file *seq, void *data)
> +{
> + /* Unused. */
> +}
> +
> +static const struct seq_operations gcov_seq_ops = {
> + .start = gcov_seq_start,
> + .next = gcov_seq_next,
> + .show = gcov_seq_show,
> + .stop = gcov_seq_stop,

turning _stop into NULL and removing gcov_seq_stop() will have the
same effect as the code above, right?

> +};
> +
> +/* Return the profiling data set for a given node. This can either be the
> + * original profiling data structure or a duplicate (also called "ghost")
> + * in case the associated object file has been unloaded. */

(continuing objection to comment style)

> +static struct gcov_info *get_node_info(struct gcov_node *node)
> +{
> + if (node->info)
> + return node->info;
> +
> + return node->ghost;
> +}
> +
> +/* open() implementation for gcov data files. Create a copy of the profiling
> + * data set and initialize the iterator and seq_file interface. */
> +static int gcov_seq_open(struct inode *inode, struct file *file)
> +{
> + struct gcov_node *node = inode->i_private;
> + struct gcov_iterator *iter;
> + struct seq_file *seq;
> + struct gcov_info *info;
> + int rc;
> +
> + mutex_lock(&node_lock);
> + /* Read from a profiling data copy to minimize reference tracking
> + * complexity and concurrent access. */
> + info = gcov_info_dup(get_node_info(node));
> + if (!info) {
> + rc = -ENOMEM;
> + goto out_unlock;
> + }

The standard pattern is:

rc = -ENOMEM;

info = gcov_info_dup(get_node_info(node));
if (!info)
goto out_unlock;

One liner shorter, no curly braces, but look how the same rc code
will be used for the code below as well:

> + iter = gcov_iter_new(info);
> + if (!iter) {
> + rc = -ENOMEM;
> + goto out_free;
> + }

making it ~3 lines shorter and much easier on the eyes.

> + rc = seq_open(file, &gcov_seq_ops);
> + if (rc)
> + goto out_free2;
> + seq = file->private_data;
> + seq->private = iter;
> + goto out_unlock;
> +
> +out_free2:
> + gcov_iter_free(iter);
> +out_free:
> + gcov_info_free(info);
> +out_unlock:
> + mutex_unlock(&node_lock);
> +
> + return rc;

No. The standard pattern to do this is:

seq = file->private_data;
seq->private = iter;
out_unlock:
mutex_unlock(&node_lock);
return rc;

out_free2:
gcov_iter_free(iter);
out_free:
gcov_info_free(info);
goto out_unlock;

Note how the common path is fall-through now. (fall-through both to
the compiler and to the human eye.)

Furthermore, istead of out_free2, please use a more descriptive
labels like:

out_free_iter_info:
out_free_info:

that contains the nesting nature.

> +}
> +
> +/* release() implementation for gcov data files. Release resources allocated
> + * by open(). */
> +static int gcov_seq_release(struct inode *inode, struct file *file)
> +{
> + struct gcov_iterator *iter;
> + struct gcov_info *info;
> + struct seq_file *seq = file->private_data;
> +
> + iter = seq->private;
> + info = gcov_iter_get_info(iter);

please either initialize all variables in the local variables
definition block, or (preferably) assign them later on (even if this
means one more line of code). Mixing the twomakes no sense.

> + gcov_iter_free(iter);
> + gcov_info_free(info);

this is a repeating pattern - shouldnt gcov_iter_free() auto-free
the (embedded) info structure as well?

> + seq_release(inode, file);
> +
> + return 0;
> +}
> +
> +/* Find a node by the associated data file name. Needs to be called with
> + * node_lock held. */
> +static struct gcov_node *get_node_by_name(const char *name)
> +{
> + struct gcov_node *node;
> + struct gcov_info *info;
> +
> + list_for_each_entry(node, &all_head, all) {
> + info = get_node_info(node);
> + if (info && (strcmp(info->filename, name) == 0))
> + return node;
> + }
> +
> + return NULL;
> +}
> +
> +static void remove_node(struct gcov_node *node);
> +
> +/* write() implementation for gcov data files. Reset profiling data for the
> + * associated file. If the object file has been unloaded (i.e. this is
> + * a "ghost" node), remove the debug fs node as well. */
> +static ssize_t gcov_seq_write(struct file *file, const char __user *addr,
> + size_t len, loff_t *pos)
> +{
> + struct seq_file *seq = file->private_data;
> + struct gcov_info *info = gcov_iter_get_info(seq->private);
> + struct gcov_node *node;
> +
> + mutex_lock(&node_lock);
> + node = get_node_by_name(info->filename);
> + if (node) {
> + /* Reset counts or remove node for unloaded modules. */
> + if (node->ghost)
> + remove_node(node);
> + else
> + gcov_info_reset(node->info);
> + }
> + /* Reset counts for open file. */
> + gcov_info_reset(info);
> + mutex_unlock(&node_lock);
> +
> + return len;
> +}
> +
> +/* Given a string <path> representing a file path of format:
> + * path/to/file.gcda
> + * construct and return a new string:
> + * <dir/>path/to/file.<ext> */
> +static char *link_target(const char *dir, const char *path, const char *ext)
> +{
> + char *target;
> + char *old_ext;
> + char *copy;
> +
> + copy = kstrdup(path, GFP_KERNEL);
> + if (!copy)
> + return NULL;
> + old_ext = strrchr(copy, '.');
> + if (old_ext)
> + *old_ext = '\0';
> + if (dir)
> + target = kasprintf(GFP_KERNEL, "%s/%s.%s", dir, copy, ext);
> + else
> + target = kasprintf(GFP_KERNEL, "%s.%s", copy, ext);
> + kfree(copy);
> +
> + return target;
> +}
> +
> +/* Construct a string representing the symbolic link target for the given
> + * gcov data file name and link type. Depending on the link type and the
> + * location of the data file, the link target can either point to a
> + * subdirectory of srctree, objtree or in an external location. */
> +static char *get_link_target(const char *filename, const struct gcov_link *ext)
> +{
> + const char *rel;
> + char *result;
> +
> + if (strncmp(filename, objtree, strlen(objtree)) == 0) {
> + rel = filename + strlen(objtree) + 1;
> + if (ext->dir == src_tree)
> + result = link_target(srctree, rel, ext->ext);
> + else
> + result = link_target(objtree, rel, ext->ext);
> + } else {
> + /* External compilation. */
> + result = link_target(NULL, filename, ext->ext);
> + }
> +
> + return result;
> +}
> +
> +#define SKEW_PREFIX ".tmp_"
> +
> +/* For a filename .tmp_filename.ext return filename.ext. Needed to compensate
> + * for filename skewing caused by the mod-versioning mechanism. */
> +static const char *deskew(const char *basename)
> +{
> + if (strncmp(basename, SKEW_PREFIX, sizeof(SKEW_PREFIX) - 1) == 0)
> + return basename + sizeof(SKEW_PREFIX) - 1;
> + return basename;
> +}
> +
> +/* Create links to additional files (usually .c and .gcno files) which the
> + * gcov tool expects to find in the same directory as the gcov data file. */
> +static void add_links(struct gcov_node *node, struct dentry *parent)
> +{
> + char *basename;
> + char *target;
> + int num;
> + int i;
> +
> + for (num = 0; gcov_link[num].ext; num++)
> + /* Nothing. */;
> + node->links = kcalloc(num, sizeof(struct dentry *), GFP_KERNEL);
> + if (!node->links)
> + return;
> + for (i = 0; i < num; i++) {
> + target = get_link_target(get_node_info(node)->filename,
> + &gcov_link[i]);
> + if (!target)
> + goto out_err;
> + basename = strrchr(target, '/');
> + if (!basename)
> + goto out_err;
> + basename++;
> + node->links[i] = debugfs_create_symlink(deskew(basename),
> + parent, target);
> + if (!node->links[i])
> + goto out_err;
> + kfree(target);
> + }
> +
> + return;
> +out_err:
> + kfree(target);
> + while (i-- > 0)
> + debugfs_remove(node->links[i]);
> + kfree(node->links);
> + node->links = NULL;
> +}
> +
> +static const struct file_operations gcov_data_fops = {
> + .open = gcov_seq_open,
> + .release = gcov_seq_release,
> + .read = seq_read,
> + .llseek = seq_lseek,
> + .write = gcov_seq_write,
> +};

please write all such multi-line structure initializations as:

.open = gcov_seq_open,
.release = gcov_seq_release,
.read = seq_read,
.llseek = seq_lseek,
.write = gcov_seq_write,

When written in that form a detail immediately stands out: the
seq_read and seq_lseek initialization is superfluous, having NULL
there will cause the seqfile code to default to those methods.

> +
> +/* Basic initialization of a new node. */
> +static void init_node(struct gcov_node *node, struct gcov_info *info,
> + const char *name, struct gcov_node *parent)
> +{
> + INIT_LIST_HEAD(&node->list);
> + INIT_LIST_HEAD(&node->children);
> + INIT_LIST_HEAD(&node->all);
> + node->info = info;
> + node->parent = parent;
> + if (name)
> + strcpy(node->name, name);
> +}
> +
> +/* Create a new node and associated debugfs entry. Needs to be called with
> + * node_lock held. */
> +static struct gcov_node *new_node(struct gcov_node *parent,
> + struct gcov_info *info, const char *name)
> +{
> + struct gcov_node *node;
> +
> + node = kzalloc(sizeof(struct gcov_node) + strlen(name) + 1, GFP_KERNEL);
> + if (!node) {
> + printk(KERN_WARNING TAG "out of memory\n");
> + return NULL;
> + }
> + init_node(node, info, name, parent);
> + /* Differentiate between gcov data file nodes and directory nodes. */
> + if (info) {
> + node->dentry = debugfs_create_file(deskew(node->name), 0600,
> + parent->dentry, node, &gcov_data_fops);
> + } else
> + node->dentry = debugfs_create_dir(node->name, parent->dentry);
> + if (!node->dentry) {
> + printk(KERN_WARNING TAG "could not create file\n");
> + kfree(node);
> + return NULL;
> + }
> + if (info)
> + add_links(node, parent->dentry);
> + list_add(&node->list, &parent->children);
> + list_add(&node->all, &all_head);
> +
> + return node;
> +}
> +
> +/* Remove symbolic links associated with node. */
> +static void remove_links(struct gcov_node *node)
> +{
> + int i;
> +
> + if (!node->links)
> + return;
> + for (i = 0; gcov_link[i].ext; i++)
> + debugfs_remove(node->links[i]);
> + kfree(node->links);
> + node->links = NULL;
> +}
> +
> +/* Remove node from all lists and debugfs and release associated resources.
> + * Needs to be called with node_lock held. */
> +static void release_node(struct gcov_node *node)
> +{
> + list_del(&node->list);
> + list_del(&node->all);
> + debugfs_remove(node->dentry);
> + remove_links(node);
> + if (node->ghost)
> + gcov_info_free(node->ghost);
> + kfree(node);
> +}
> +
> +/* Release node and empty parents. Needs to be called with node_lock held. */
> +static void remove_node(struct gcov_node *node)
> +{
> + struct gcov_node *parent;
> +
> + while ((node != &root_node) && list_empty(&node->children)) {
> + parent = node->parent;
> + release_node(node);
> + node = parent;
> + }
> +}
> +
> +/* Find child node with given basename. Needs to be called with node_lock
> + * held. */
> +static struct gcov_node *get_child_by_name(struct gcov_node *parent,
> + const char *name)
> +{
> + struct gcov_node *node;
> +
> + list_for_each_entry(node, &parent->children, list) {
> + if (strcmp(node->name, name) == 0)
> + return node;
> + }
> +
> + return NULL;
> +}
> +
> +/* write() implementation for reset file. Reset all profiling data to zero
> + * and remove ghost nodes. */
> +static ssize_t reset_write(struct file *file, const char __user *addr,
> + size_t len, loff_t *pos)
> +{
> + struct gcov_node *node;
> +
> + mutex_lock(&node_lock);
> +restart:
> + list_for_each_entry(node, &all_head, all) {
> + if (node->info)
> + gcov_info_reset(node->info);
> + else if (list_empty(&node->children)) {
> + remove_node(node);
> + /* Several nodes may have gone - restart loop. */
> + goto restart;
> + }
> + }
> + mutex_unlock(&node_lock);
> +
> + return len;
> +}
> +
> +/* read() implementation for reset file. Unused. */
> +static ssize_t reset_read(struct file *file, char __user *addr, size_t len,
> + loff_t *pos)
> +{
> + /* Allow read operation so that a recursive copy won't fail. */
> + return 0;
> +}
> +
> +static const struct file_operations gcov_reset_fops = {
> + .write = reset_write,
> + .read = reset_read,
> +};
> +
> +/* Create a node for a given profiling data set and add it to all lists and
> + * debugfs. Needs to be called with node_lock held. */
> +static void add_node(struct gcov_info *info)
> +{
> + char *filename;
> + char *curr;
> + char *next;
> + struct gcov_node *parent;
> + struct gcov_node *node;
> +
> + filename = kstrdup(info->filename, GFP_KERNEL);
> + if (!filename)
> + return;
> + parent = &root_node;
> + /* Create directory nodes along the path. */
> + for (curr = filename; (next = strchr(curr, '/')); curr = next + 1) {
> + if (curr == next)
> + continue;
> + *next = 0;
> + if (strcmp(curr, ".") == 0)
> + continue;
> + if (strcmp(curr, "..") == 0) {
> + if (!parent->parent)
> + goto out_err;
> + parent = parent->parent;
> + continue;
> + }
> + node = get_child_by_name(parent, curr);
> + if (!node) {
> + node = new_node(parent, NULL, curr);
> + if (!node)
> + goto out_err;
> + }
> + parent = node;
> + }
> + /* Create file node. */
> + node = new_node(parent, info, curr);
> + if (node)
> + goto out;
> +out_err:
> + remove_node(parent);
> +out:
> + kfree(filename);

this too is an ugly teardown sequence mixing success and failure
paths. Please clean it up like suggested above.

> +}
> +
> +/* The profiling data set associated with this node is being unloaded. Store a
> + * copy of the profiling data and turn this node into a "ghost". */
> +static int ghost_node(struct gcov_node *node)
> +{
> + node->ghost = gcov_info_dup(node->info);
> + if (!node->ghost) {
> + printk(KERN_WARNING TAG "could not save data for '%s' (out of "
> + "memory)\n", node->info->filename);
> + return -ENOMEM;
> + }
> + node->info = NULL;
> +
> + return 0;
> +}
> +
> +/* Profiling data for this node has been loaded again. Add profiling data
> + * from previous instantiation and turn this node into a regular node. */
> +static void revive_node(struct gcov_node *node, struct gcov_info *info)
> +{
> + if (gcov_info_is_compatible(node->ghost, info))
> + gcov_info_add(info, node->ghost);
> + else {
> + printk(KERN_WARNING TAG "discarding saved data for '%s' "
> + "(version changed)\n", info->filename);
> + }
> + gcov_info_free(node->ghost);
> + node->ghost = NULL;
> + node->info = info;
> +}
> +
> +/* Callback to create/remove profiling files when code compiled with
> + * -fprofile-arcs is loaded/unloaded. */
> +void gcov_event(enum gcov_action action, struct gcov_info *info)
> +{
> + struct gcov_node *node;
> +
> + mutex_lock(&node_lock);
> + node = get_node_by_name(info->filename);
> + switch (action) {
> + case gcov_add:
> + /* Add new node or revive ghost. */
> + if (!node) {
> + add_node(info);
> + break;
> + }
> + if (gcov_persist)
> + revive_node(node, info);
> + else
> + printk(KERN_WARNING TAG "could not add '%s' "
> + "(already exists)\n", info->filename);

Please use pr_warning, pr_info, etc. for all such KERN_* printks in
the whole patch.

> + break;
> + case gcov_remove:
> + /* Remove node or turn into ghost. */
> + if (!node) {
> + printk(KERN_WARNING TAG "could not remove '%s' (not "
> + "found)\n", info->filename);
> + break;
> + }
> + if (gcov_persist) {
> + if (!ghost_node(node))
> + break;
> + }
> + remove_node(node);
> + break;
> + }
> + mutex_unlock(&node_lock);
> +}
> +
> +/* Create debugfs entries. */
> +static __init int gcov_fs_init(void)
> +{
> + int rc;
> +
> + init_node(&root_node, NULL, NULL, NULL);
> + /* /sys/kernel/debug/gcov will be parent for the reset control file
> + * and all profiling files. */
> + root_node.dentry = debugfs_create_dir("gcov", NULL);
> + if (!root_node.dentry) {
> + printk(KERN_ERR TAG "could not create root dir\n");
> + rc = -EIO;
> + goto out_remove;
> + }
> + /* Create reset file which resets all profiling counts when written
> + * to. */
> + reset_dentry = debugfs_create_file("reset", 0600, root_node.dentry,
> + NULL, &gcov_reset_fops);
> + if (!reset_dentry) {
> + printk(KERN_ERR TAG "could not create reset file\n");
> + rc = -EIO;
> + goto out_remove;
> + }

rc setting could move to the local variable definition line. This
would save two lines of code.

> + /* Replay previous events to get our fs hierarchy up-to-date. */
> + gcov_enable_events();
> +
> + return 0;
> +out_remove:
> + if (root_node.dentry)
> + debugfs_remove(root_node.dentry);

the printks could move to this place, cleaning up the normal code
flow.

> +
> + return rc;
> +}
> +device_initcall(gcov_fs_init);
> Index: linux-2.6.30-rc4/kernel/gcov/gcc_3_4.c
> ===================================================================
> --- /dev/null
> +++ linux-2.6.30-rc4/kernel/gcov/gcc_3_4.c
> @@ -0,0 +1,419 @@
> +/*
> + * This code provides functions to handle gcc's profiling data format
> + * introduced with gcc 3.4. Future versions of gcc may change the gcov
> + * format (as happened before), so all format-specific information needs
> + * to be kept modular and easily exchangeable.
> + *
> + * This file is based on gcc-internal definitions. Functions and data
> + * structures are defined to be compatible with gcc counterparts.
> + * For a better understanding, refer to gcc source: gcc/gcov-io.h.
> + *
> + * Copyright IBM Corp. 2009
> + * Author(s): Peter Oberparleiter <oberpar@xxxxxxxxxxxxxxxxxx>
> + *
> + * Uses gcc-internal data definitions.
> + */
> +
> +#include <linux/errno.h>
> +#include <linux/slab.h>
> +#include <linux/string.h>
> +#include <linux/seq_file.h>
> +#include "gcov.h"
> +
> +/* Symbolic links to be created for each profiling data file. */
> +const struct gcov_link gcov_link[] = {
> + { obj_tree, "gcno" }, /* Link to .gcno file in $(objtree). */
> + { 0, NULL},
> +};
> +
> +/* Determine whether a counter is active. Based on gcc magic. Doesn't change
> + * at run-time. */
> +static int counter_active(struct gcov_info *info, unsigned int type)
> +{
> + return (1 << type) & info->ctr_mask;
> +}
> +
> +/* Determine number of active counters. Based on gcc magic. */
> +static unsigned int num_counter_active(struct gcov_info *info)
> +{
> + unsigned int i;
> + unsigned int result = 0;
> +
> + for (i = 0; i < GCOV_COUNTERS; i++)
> + if (counter_active(info, i))
> + result++;
> + return result;
> +}
> +
> +/**
> + * gcov_info_reset - reset profiling data to zero
> + * @info: profiling data set
> + */
> +void gcov_info_reset(struct gcov_info *info)
> +{
> + unsigned int active = num_counter_active(info);
> + unsigned int i;
> +
> + for (i = 0; i < active; i++)
> + memset(info->counts[i].values, 0,
> + info->counts[i].num * sizeof(gcov_type));
> +}
> +
> +/**
> + * gcov_info_is_compatible - check if profiling data can be added
> + * @info1: first profiling data set
> + * @info2: second profiling data set
> + *
> + * Returns non-zero if profiling data can be added, zero otherwise.
> + */
> +int gcov_info_is_compatible(struct gcov_info *info1, struct gcov_info *info2)
> +{
> + return (info1->stamp == info2->stamp);
> +}
> +
> +/**
> + * gcov_info_add - add up profiling data
> + * @dest: profiling data set to which data is added
> + * @source: profiling data set which is added
> + *
> + * Adds profiling counts of @source to @dest.
> + */
> +void gcov_info_add(struct gcov_info *dest, struct gcov_info *source)
> +{
> + unsigned int i;
> + unsigned int j;
> +
> + for (i = 0; i < num_counter_active(dest); i++)
> + for (j = 0; j < dest->counts[i].num; j++)
> + dest->counts[i].values[j] +=
> + source->counts[i].values[j];
> +}
> +
> +/* Get size of function info entry. Based on gcc magic. */
> +static size_t get_fn_size(struct gcov_info *info)
> +{
> + size_t size;
> +
> + size = sizeof(struct gcov_fn_info) + num_counter_active(info) *
> + sizeof(unsigned int);
> + if (__alignof__(struct gcov_fn_info) > sizeof(unsigned int))
> + size = ALIGN(size, __alignof__(struct gcov_fn_info));
> + return size;
> +}
> +
> +/* Get address of function info entry. Based on gcc magic. */
> +static struct gcov_fn_info *get_fn_info(struct gcov_info *info, unsigned int fn)
> +{
> + return (struct gcov_fn_info *)
> + ((char *) info->functions + fn * get_fn_size(info));
> +}
> +
> +/**
> + * gcov_info_dup - duplicate profiling data set
> + * @info: profiling data set to duplicate
> + *
> + * Return newly allocated duplicate on success, %NULL on error.
> + */
> +struct gcov_info *gcov_info_dup(struct gcov_info *info)
> +{
> + struct gcov_info *dup;
> + unsigned int i;
> + unsigned int active = num_counter_active(info);
> +
> + /* Duplicate gcov_info. */
> + dup = kzalloc(sizeof(struct gcov_info) +
> + sizeof(struct gcov_ctr_info) * active, GFP_KERNEL);
> + if (!dup)
> + return NULL;
> + dup->version = info->version;
> + dup->stamp = info->stamp;
> + dup->n_functions = info->n_functions;
> + dup->ctr_mask = info->ctr_mask;
> + /* Duplicate filename. */
> + dup->filename = kstrdup(info->filename, GFP_KERNEL);

Please write such 6-line initializations as:

dup->version = info->version;
dup->stamp = info->stamp;
dup->n_functions = info->n_functions;
dup->ctr_mask = info->ctr_mask;
/* Duplicate filename. */
dup->filename = kstrdup(info->filename, GFP_KERNEL);

Makes it far easier to check at a glance that it's 1) correct 2)
where the complexity lies.

> + if (!dup->filename)
> + goto out_free;
> + /* Duplicate table of functions. */
> + dup->functions = kmemdup(info->functions, info->n_functions *
> + get_fn_size(info), GFP_KERNEL);
> + if (!dup->functions)
> + goto out_free;
> + /* Duplicate counter arrays. */
> + for (i = 0; i < active ; i++) {
> + dup->counts[i].num = info->counts[i].num;
> + dup->counts[i].merge = info->counts[i].merge;
> + dup->counts[i].values = kmemdup(info->counts[i].values,
> + sizeof(gcov_type) * info->counts[i].num,
> + GFP_KERNEL);

Please get rid of these ugly linebreaks by introducing a local
'struct gcov_ctr_info *count = dup->counts + i' and 'size'
variables. You'll get a nice:

gcov_ctr_info *count = dup->counts + i;
size_t size = count->num * sizeof(gcov_type);

count->num = info->counts[i].num;
count->merge = info->counts[i].merge;
count->values = kmemdup(count->values, size, GFP_KERNEL);

if (!count->values)
goto out_free;

> + }
> + return dup;
> +
> +out_free:
> + gcov_info_free(dup);

The convention for error case labels is "err_free". 'out' labels are
generally used for normal outgoing paths. Here, when the entry's
size is doubled, an allocation failure is an error.

> +
> + return NULL;
> +}
> +
> +/**
> + * gcov_info_free - release memory for profiling data set duplicate
> + * @info: profiling data set duplicate to free
> + */
> +void gcov_info_free(struct gcov_info *info)
> +{
> + unsigned int active = num_counter_active(info);
> + unsigned int i;
> +
> + for (i = 0; i < active ; i++)
> + kfree(info->counts[i].values);
> + kfree(info->functions);
> + kfree(info->filename);
> + kfree(info);
> +}
> +
> +/**
> + * struct type_info - iterator helper array
> + * @ctr_type: counter type
> + * @offset: index of the first value of the current function for this type
> + *
> + * This array is needed to convert the in-memory data format into the in-file
> + * data format:
> + *
> + * In-memory:
> + * for each counter type
> + * for each function
> + * values
> + *
> + * In-file:
> + * for each function
> + * for each counter type
> + * values
> + *
> + * See gcc source gcc/gcov-io.h for more information on data organization.
> + */
> +struct type_info {
> + int ctr_type;
> + unsigned int offset;
> +};
> +
> +/**
> + * struct gcov_iterator - specifies current file position in logical records
> + * @info: associated profiling data
> + * @record: record type
> + * @function: function number
> + * @type: counter type
> + * @count: index into values array
> + * @num_types: number of counter types
> + * @type_info: helper array to get values-array offset for current function
> + */
> +struct gcov_iterator {
> + struct gcov_info *info;
> +
> + int record;
> + unsigned int function;
> + unsigned int type;
> + unsigned int count;
> +
> + int num_types;
> + struct type_info type_info[0];
> +};
> +
> +static struct gcov_fn_info *get_func(struct gcov_iterator *iter)
> +{
> + return get_fn_info(iter->info, iter->function);
> +}
> +
> +static struct type_info *get_type(struct gcov_iterator *iter)
> +{
> + return &iter->type_info[iter->type];
> +}
> +
> +/**
> + * gcov_iter_new - allocate and initialize profiling data iterator
> + * @info: profiling data set to be iterated
> + *
> + * Return file iterator on success, %NULL otherwise.
> + */
> +struct gcov_iterator *gcov_iter_new(struct gcov_info *info)
> +{
> + struct gcov_iterator *iter;
> +
> + iter = kzalloc(sizeof(struct gcov_iterator) +
> + num_counter_active(info) * sizeof(struct type_info),
> + GFP_KERNEL);
> + if (iter)
> + iter->info = info;
> +
> + return iter;
> +}
> +
> +/**
> + * gcov_iter_free - release memory for iterator
> + * @iter: file iterator to free
> + */
> +void gcov_iter_free(struct gcov_iterator *iter)
> +{
> + kfree(iter);
> +}
> +
> +/**
> + * gcov_iter_get_info - return profiling data set for given file iterator
> + * @iter: file iterator
> + */
> +struct gcov_info *gcov_iter_get_info(struct gcov_iterator *iter)
> +{
> + return iter->info;
> +}

Such wrappers are completely pointless. Here it obfuscates the usage
sites and makes them _larger_. Before it was:

iter->info

Now it is:

gcov_iter_get_info(iter)

Which is not very helpful ...

> +
> +/**
> + * gcov_iter_start - reset file iterator to starting position
> + * @iter: file iterator
> + */
> +void gcov_iter_start(struct gcov_iterator *iter)
> +{
> + int i;
> +
> + iter->record = 0;
> + iter->function = 0;
> + iter->type = 0;
> + iter->count = 0;
> + iter->num_types = 0;
> + for (i = 0; i < GCOV_COUNTERS; i++) {
> + if (counter_active(iter->info, i)) {
> + iter->type_info[iter->num_types].ctr_type = i;
> + iter->type_info[iter->num_types++].offset = 0;
> + }
> + }
> +}
> +
> +/**
> + * gcov_iter_next - advance file iterator to next logical record
> + * @iter: file iterator
> + *
> + * Return zero if new position is valid, non-zero if iterator has reached end.
> + */
> +int gcov_iter_next(struct gcov_iterator *iter)
> +{
> + switch (iter->record) {
> + case 0:
> + case 1:
> + case 3:
> + case 4:
> + case 5:
> + case 7:
> + /* Advance to next record */
> + iter->record++;
> + break;
> + case 9:
> + /* Advance to next count */
> + iter->count++;
> + /* fall through */
> + case 8:
> + if (iter->count < get_func(iter)->n_ctrs[iter->type]) {
> + iter->record = 9;
> + break;
> + }
> + /* Advance to next counter type */
> + get_type(iter)->offset += iter->count;
> + iter->count = 0;
> + iter->type++;
> + /* fall through */
> + case 6:
> + if (iter->type < iter->num_types) {
> + iter->record = 7;
> + break;
> + }
> + /* Advance to next function */
> + iter->type = 0;
> + iter->function++;
> + /* fall through */
> + case 2:
> + if (iter->function < iter->info->n_functions)
> + iter->record = 3;
> + else
> + iter->record = -1;
> + break;

what are all these magic numbers? Is there a symbolic form of them?

> + }
> + /* Check for EOF. */
> + if (iter->record == -1)
> + return -EINVAL;
> + else
> + return 0;
> +}
> +
> +/**
> + * seq_write_gcov_int - write number in gcov format to seq_file
> + * @seq: seq_file handle
> + * @size: size of number in bytes (either 4 or 8)
> + * @v: value to be stored
> + *
> + * Number format defined by gcc: numbers are recorded in the 32 bit
> + * unsigned binary form of the endianness of the machine generating the
> + * file. 64 bit numbers are stored as two 32 bit numbers, the low part
> + * first.
> + */
> +static int seq_write_gcov_int(struct seq_file *seq, size_t size, u64 v)
> +{
> + u32 data[2];
> +
> + switch (size) {
> + case 8:
> + data[1] = (v >> 32);
> + /* fall through */
> + case 4:
> + data[0] = (v & 0xffffffffUL);
> + return seq_write(seq, data, size);
> + }
> + return -EINVAL;
> +}
> +
> +/**
> + * gcov_iter_write - write data for current pos to seq_file
> + * @iter: file iterator
> + * @seq: seq_file handle
> + *
> + * Return zero on success, non-zero otherwise.
> + */
> +int gcov_iter_write(struct gcov_iterator *iter, struct seq_file *seq)
> +{
> + int rc = -EINVAL;
> +
> + switch (iter->record) {
> + case 0: /* file magic */
> + rc = seq_write_gcov_int(seq, 4, GCOV_DATA_MAGIC);
> + break;
> + case 1: /* gcov_version */
> + rc = seq_write_gcov_int(seq, 4, iter->info->version);

please use sizeof, or push the 'input type is int' assumption into
seq_write_gcov_int(). The latter is more intelligent i guess, but
for 8-byte writes:

> + break;
> + case 2: /* time stamp */
> + rc = seq_write_gcov_int(seq, 4, iter->info->stamp);
> + break;
> + case 3: /* function tag */
> + rc = seq_write_gcov_int(seq, 4, GCOV_TAG_FUNCTION);
> + break;
> + case 4: /* function tag length */
> + rc = seq_write_gcov_int(seq, 4, 2);
> + break;
> + case 5: /* function ident*/
> + rc = seq_write_gcov_int(seq, 4, get_func(iter)->ident);
> + break;
> + case 6: /* function checksum */
> + rc = seq_write_gcov_int(seq, 4, get_func(iter)->checksum);
> + break;
> + case 7: /* count tag */
> + rc = seq_write_gcov_int(seq, 4,
> + GCOV_TAG_FOR_COUNTER(get_type(iter)->ctr_type));
> + break;
> + case 8: /* count length */
> + rc = seq_write_gcov_int(seq, 4,
> + get_func(iter)->n_ctrs[iter->type] * 2);
> + break;
> + case 9: /* count */
> + rc = seq_write_gcov_int(seq, 8,
> + iter->info->counts[iter->type].
> + values[iter->count + get_type(iter)->offset]);

... introduce a seq_write_gcov_long variant for this.

> + break;
> + }
> + return rc;
> +}
> Index: linux-2.6.30-rc4/kernel/gcov/gcov.h
> ===================================================================
> --- /dev/null
> +++ linux-2.6.30-rc4/kernel/gcov/gcov.h
> @@ -0,0 +1,128 @@
> +/*
> + * Profiling infrastructure declarations.
> + *
> + * This file is based on gcc-internal definitions. Data structures are
> + * defined to be compatible with gcc counterparts. For a better
> + * understanding, refer to gcc source: gcc/gcov-io.h.
> + *
> + * Copyright IBM Corp. 2009
> + * Author(s): Peter Oberparleiter <oberpar@xxxxxxxxxxxxxxxxxx>
> + *
> + * Uses gcc-internal data definitions.
> + */
> +
> +#ifndef GCOV_H
> +#define GCOV_H GCOV_H
> +
> +#include <linux/types.h>
> +
> +#define TAG "gcov: "
> +
> +/* Profiling data types used for gcc 3.4 and above - these are defined by
> + * gcc and need to be kept as close to the original definition as possible to
> + * remain compatible. */
> +#define GCOV_COUNTERS 5
> +#define GCOV_DATA_MAGIC ((unsigned int) 0x67636461)

The 0x67636461U literal is the same.

> +#define GCOV_TAG_FUNCTION ((unsigned int) 0x01000000)

ditto.

> +#define GCOV_TAG_COUNTER_BASE ((unsigned int) 0x01a10000)

ditto.

> +#define GCOV_TAG_FOR_COUNTER(count) \
> + (GCOV_TAG_COUNTER_BASE + ((unsigned int) (count) << 17))

generates code: should be an inline function.

> +
> +#if BITS_PER_LONG >= 64
> +typedef long gcov_type;
> +#else
> +typedef long long gcov_type;
> +#endif

please use u64 instead of gcov_type. This is ABI so it wont change.

> +
> +/**
> + * struct gcov_fn_info - profiling meta data per function
> + * @ident: object file-unique function identifier
> + * @checksum: function checksum
> + * @n_ctrs: number of values per counter type belonging to this function
> + *
> + * This data is generated by gcc during compilation and doesn't change
> + * at run-time.
> + */
> +struct gcov_fn_info {
> + unsigned int ident;
> + unsigned int checksum;
> + unsigned int n_ctrs[0];
> +};
> +
> +/**
> + * struct gcov_ctr_info - profiling data per counter type
> + * @num: number of counter values for this type
> + * @values: array of counter values for this type
> + * @merge: merge function for counter values of this type (unused)
> + *
> + * This data is generated by gcc during compilation and doesn't change
> + * at run-time with the exception of the values array.
> + */
> +struct gcov_ctr_info {
> + unsigned int num;
> + gcov_type *values;
> + void (*merge)(gcov_type *, unsigned int);
> +};
> +
> +/**
> + * struct gcov_info - profiling data per object file
> + * @version: gcov version magic indicating the gcc version used for compilation
> + * @next: list head for a singly-linked list
> + * @stamp: time stamp
> + * @filename: name of the associated gcov data file
> + * @n_functions: number of instrumented functions
> + * @functions: function data
> + * @ctr_mask: mask specifying which counter types are active
> + * @counts: counter data per counter type
> + *
> + * This data is generated by gcc during compilation and doesn't change
> + * at run-time with the exception of the next pointer.
> + */
> +struct gcov_info {
> + unsigned int version;
> + struct gcov_info *next;
> + unsigned int stamp;
> + const char *filename;
> + unsigned int n_functions;
> + const struct gcov_fn_info *functions;
> + unsigned int ctr_mask;
> + struct gcov_ctr_info counts[0];


please write such structure definitions as:

struct gcov_info {
unsigned int version;
struct gcov_info *next;
unsigned int stamp;
const char *filename;
unsigned int n_functions;
const struct gcov_fn_info *functions;
unsigned int ctr_mask;
struct gcov_ctr_info counts[0];

for better readability

That form immediately shows a packing inefficiency - the following
ordering of the fields:

unsigned int version;
unsigned int stamp;
unsigned int n_functions;
unsigned int ctr_mask;
struct gcov_info *next;
const char *filename;
const struct gcov_fn_info *functions;
struct gcov_ctr_info counts[0];

... will save 8 bytes off the structure size on 64-bit platforms.

> +};
> +
> +/* Base interface. */
> +enum gcov_action {
> + gcov_add,
> + gcov_remove,
> +};

please use capital letters for constants. The 'gcov _add' here:

gcov_event(gcov_add, info);

Can be easily mistaken for a function pointer or a local variable.

> +
> +void gcov_event(enum gcov_action action, struct gcov_info *info);
> +void gcov_enable_events(void);
> +
> +/* Iterator control. */
> +struct seq_file;
> +struct gcov_iterator;
> +
> +struct gcov_iterator *gcov_iter_new(struct gcov_info *info);
> +void gcov_iter_free(struct gcov_iterator *iter);
> +void gcov_iter_start(struct gcov_iterator *iter);
> +int gcov_iter_next(struct gcov_iterator *iter);
> +int gcov_iter_write(struct gcov_iterator *iter, struct seq_file *seq);
> +struct gcov_info *gcov_iter_get_info(struct gcov_iterator *iter);
> +
> +/* gcov_info control. */
> +void gcov_info_reset(struct gcov_info *info);
> +int gcov_info_is_compatible(struct gcov_info *info1, struct gcov_info *info2);
> +void gcov_info_add(struct gcov_info *dest, struct gcov_info *source);
> +struct gcov_info *gcov_info_dup(struct gcov_info *info);
> +void gcov_info_free(struct gcov_info *info);
> +
> +struct gcov_link {
> + enum {
> + obj_tree,
> + src_tree,

ditto.

> + } dir;
> + const char *ext;
> +};
> +extern const struct gcov_link gcov_link[];
> +
> +#endif /* GCOV_H */
> Index: linux-2.6.30-rc4/scripts/Makefile.lib
> ===================================================================
> --- linux-2.6.30-rc4.orig/scripts/Makefile.lib
> +++ linux-2.6.30-rc4/scripts/Makefile.lib
> @@ -116,6 +116,15 @@ _a_flags = $(KBUILD_CPPFLAGS) $(KB
> $(asflags-y) $(AFLAGS_$(basetarget).o)
> _cpp_flags = $(KBUILD_CPPFLAGS) $(cppflags-y) $(CPPFLAGS_$(@F))
>
> +# Enable gcov profiling flags for a file, directory or for all files depending
> +# on variables GCOV_PROFILE_obj.o, GCOV_PROFILE and CONFIG_GCOV_PROFILE_ALL
> +# (in this order)
> +ifeq ($(CONFIG_GCOV_KERNEL),y)

Please try to use winged comments in makefiles too.

> +_c_flags += $(if $(patsubst n%,, \
> + $(GCOV_PROFILE_$(basetarget).o)$(GCOV_PROFILE)$(CONFIG_GCOV_PROFILE_ALL)), \
> + $(CFLAGS_GCOV))
> +endif
> +
> # If building the kernel in a separate objtree expand all occurrences
> # of -Idir to -I$(srctree)/dir except for absolute paths (starting with '/').

Furthermore:

> +config GCOV_PROFILE_ALL
> + bool "Profile entire Kernel"
> + depends on GCOV_KERNEL
> + depends on S390 || X86_32

64-bit x86 support is a must-have before we can think about
upstreaming any of this.

also:

> +config GCOV_PROFILE_ALL
> + bool "Profile entire Kernel"
> + depends on GCOV_KERNEL
> + depends on S390 || X86_32
> + default n
> + ---help---
> + This options activates profiling for the entire kernel.
> +
> + If unsure, say N.
> +
> + Note that a kernel compiled with profiling flags will be significantly
> + larger and run slower. Also be sure to exclude files from profiling
> + which are not linked to the kernel image to prevent linker errors.

... the gcov code should consider using runtime code patching
techniques like ftrace does - if possible - to bring this overhead
down.

So ... there's still a lot of work to be done with this code, and
this review only sratched the surface. Please Cc: me to future
submissions of this patch-set.

Thanks,

Ingo
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/