bond interface arp, vlan and trunk / network question

[stefan novak]

Hello list,

I've got a Problem with my bladecenter and bond interfaces.
My Server has 2 interface, each on a seperate switch. Each
serverinterface is connected via a trunk to one of the switches.
Each switch has a trunk to stacked-backbone switch.

nic1 --trunk--> bladesw1 --trunk--> backbone switch
nic2 --trunk--> bladesw2 --trunk--> backbone switch

So far vlan and trunking works as expected. But if one trunk
connection from a bladeswitch to the backbone switch is down the
mii-tool cant recognize this.
I tried to use an arp target on the backbone switch to check the
connection state.

Now i'm running into problems. :(
My bladesw1 is configured with a trunk and a private vlan id of 600.
On the backbone switch is a server in the vlan 600 connected, but i
can't get an arp request.

What can be the problem, or is it possible to add a vlan tag on the arp check?

thx for your help and sorry for my bad english...

Stefan
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/