[PATCH] rtl8187se staging: Fix compilation warnings and procfsdirectory leak

From: Larry Finger
Date: Sat Apr 18 2009 - 23:34:16 EST


Fix some warnings during compilation and correct a programming error
that was leaking a directory in /proc.

Signed-off-by: Larry Finger <Larry.Finger@xxxxxxxxxxxx>
Tested-by: Bernhard Schiffner <bernhard@xxxxxxxxxxxxxxxxxxxx>
---

Greg,

Please incorporate this patch in wireless/staging as soon as is possible.
I'm not sure what the rules are concerning such changes.

I have a number of patches that clean up the vendor code; however, I think
I will hold them for the moment as they do not change the function of this
driver and only improve the readability.

I am now working on porting this driver to use mac80211 so that it may be
included in mainline.

Larry
---

Index: linux-2.6/drivers/staging/rtl8187se/r8180.h
===================================================================
--- linux-2.6.orig/drivers/staging/rtl8187se/r8180.h
+++ linux-2.6/drivers/staging/rtl8187se/r8180.h
@@ -19,7 +19,7 @@
#define R8180H


-#define RTL8180_MODULE_NAME "rtl8180"
+#define RTL8180_MODULE_NAME "r8180"
#define DMESG(x,a...) printk(KERN_INFO RTL8180_MODULE_NAME ": " x "\n", ## a)
#define DMESGW(x,a...) printk(KERN_WARNING RTL8180_MODULE_NAME ": WW:" x "\n", ## a)
#define DMESGE(x,a...) printk(KERN_WARNING RTL8180_MODULE_NAME ": EE:" x "\n", ## a)
Index: linux-2.6/drivers/staging/rtl8187se/r8180_core.c
===================================================================
--- linux-2.6.orig/drivers/staging/rtl8187se/r8180_core.c
+++ linux-2.6/drivers/staging/rtl8187se/r8180_core.c
@@ -640,11 +640,9 @@ void rtl8180_proc_init_one(struct net_de
{
struct proc_dir_entry *e;
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
- priv->dir_dev = create_proc_entry(dev->name,
- S_IFDIR | S_IRUGO | S_IXUGO,
- rtl8180_proc);
+ priv->dir_dev = rtl8180_proc;
if (!priv->dir_dev) {
- DMESGE("Unable to initialize /proc/net/rtl8180/%s\n",
+ DMESGE("Unable to initialize /proc/net/r8180/%s\n",
dev->name);
return;
}
@@ -654,7 +652,7 @@ void rtl8180_proc_init_one(struct net_de

if (!e) {
DMESGE("Unable to initialize "
- "/proc/net/rtl8180/%s/stats-hw\n",
+ "/proc/net/r8180/%s/stats-hw\n",
dev->name);
}

@@ -663,7 +661,7 @@ void rtl8180_proc_init_one(struct net_de

if (!e) {
DMESGE("Unable to initialize "
- "/proc/net/rtl8180/%s/stats-rx\n",
+ "/proc/net/r8180/%s/stats-rx\n",
dev->name);
}

@@ -673,7 +671,7 @@ void rtl8180_proc_init_one(struct net_de

if (!e) {
DMESGE("Unable to initialize "
- "/proc/net/rtl8180/%s/stats-tx\n",
+ "/proc/net/r8180/%s/stats-tx\n",
dev->name);
}
#if 0
@@ -702,7 +700,7 @@ void rtl8180_proc_init_one(struct net_de

if (!e) {
DMESGE("Unable to initialize "
- "/proc/net/rtl8180/%s/registers\n",
+ "/proc/net/r8180/%s/registers\n",
dev->name);
}
}
@@ -977,13 +975,6 @@ void check_tx_ring(struct net_device *de
*tmp & (1<<15)? "ok": "err", *(tmp+4));
}

- DMESG("nic at %d",
- (nic-nicbegin) / 8 /4);
- DMESG("tail at %d", ((int)tail - (int)begin) /8 /4);
- DMESG("head at %d", ((int)head - (int)begin) /8 /4);
- DMESG("check free desc returns %d", check_nic_enought_desc(dev,pri));
- DMESG("free desc is %d\n", get_curr_tx_free_desc(dev,pri));
- //rtl8180_reset(dev);
return;
}

@@ -1736,17 +1727,7 @@ short alloc_tx_desc_ring(struct net_devi
* descriptor's buffer must be 256 byte aligned
* we shouldn't be here, since we set DMA mask !
*/
- DMESGW("Fixing TX alignment");
- desc = (u32*)((u8*)desc + 256);
-#if (defined(CONFIG_HIGHMEM64G) || defined(CONFIG_64BIT_PHYS_ADDR))
- desc = (u32*)((u64)desc &~ 0xff);
- dma_desc = (dma_addr_t)((u8*)dma_desc + 256);
- dma_desc = (dma_addr_t)((u64)dma_desc &~ 0xff);
-#else
- desc = (u32*)((u32)desc &~ 0xff);
- dma_desc = (dma_addr_t)((u8*)dma_desc + 256);
- dma_desc = (dma_addr_t)((u32)dma_desc &~ 0xff);
-#endif
+ WARN(1, "DMA buffer is not aligned\n");
}
tmp=desc;
for (i=0;i<count;i++)
@@ -1984,18 +1965,7 @@ short alloc_rx_desc_ring(struct net_devi
* descriptor's buffer must be 256 byte aligned
* should never happen since we specify the DMA mask
*/
-
- DMESGW("Fixing RX alignment");
- desc = (u32*)((u8*)desc + 256);
-#if (defined(CONFIG_HIGHMEM64G) || defined(CONFIG_64BIT_PHYS_ADDR))
- desc = (u32*)((u64)desc &~ 0xff);
- dma_desc = (dma_addr_t)((u8*)dma_desc + 256);
- dma_desc = (dma_addr_t)((u64)dma_desc &~ 0xff);
-#else
- desc = (u32*)((u32)desc &~ 0xff);
- dma_desc = (dma_addr_t)((u8*)dma_desc + 256);
- dma_desc = (dma_addr_t)((u32)dma_desc &~ 0xff);
-#endif
+ WARN(1, "DMA buffer is not aligned\n");
}

priv->rxring=desc;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/