Re: mcp55 forcedeth woes

[Andrew Morton]

(suitable cc's added)

On Mon, 13 Apr 2009 15:13:05 -0700 (PDT)
"Yan Seiner" <yan@xxxxxxxxxx> wrote:

> I have a few Asus M2N-SLI deluxe mobos.  These mobos have the MCP55
> chipset and two 1gb ethernet ports.  Occasionally, and for no reason that
> I can figure out, these ports will die.  There are various ways to try and
> fix these; they seem to be about 50% effective, and approach something
> akin to voodoo.
> 
> Based on this discussion here:
> 
> http://patchwork.kernel.org/patch/16212/
> 
> I've gotten the ability to turn the ports on and off somewhat.
> 
> For port 0,
> 
> ethtool -s eth0 autoneg off speed 10 duplex full
> 
> turns on the link, and gets me half-duplex, 10mb/sec. Not much, granted.
> 
> ethtool -s eth0 autoneg off speed 100 duplex full
> 
> causes the link to go up and down on about a 2 second cycle.
> 
> ethtool -s eth0 autoneg on
> 
> causes the link to drop.
> 
> For port 1, the behavior is similar, except that I can get a stable 100
> mbit connection.
> 
> So the problem is in the autoneg code. It's a driver issue as this is
> reported widely to work under windows of various flavors.
> 
> I'm running 2.6.29.1; I'm ok with patching and building kernels, but I'm
> not a kernel hacker.
> 
> What, if anything, can I provide and do to fix this?
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/