[GIT PULL] x86 fixes
From: Ingo Molnar
Date: Thu Apr 09 2009 - 11:48:21 EST
Linus,
Please pull the latest x86-fixes-for-linus git tree from:
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip.git x86-fixes-for-linus
Thanks,
Ingo
------------------>
Alan Cox (1):
x86: DMI match for the Dell DXP061 as it needs BIOS reboot
David Woodhouse (1):
x86, intel-iommu: fix X2APIC && !ACPI build failure
H. Peter Anvin (1):
x86, setup: un-resequence mode setting for VGA 80x34 and 80x60 modes
Hidetoshi Seto (1):
x86: smarten /proc/interrupts output for new counters
Jaswinder Singh Rajput (1):
x86: cpu_debug remove execute permission
Yinghai Lu (1):
x86: make 64 bit to use default_inquire_remote_apic
arch/x86/Kconfig | 6 +-----
arch/x86/boot/video-vga.c | 33 +++++++++++++++++++++++----------
arch/x86/kernel/apic/apic_flat_64.c | 4 ++--
arch/x86/kernel/irq.c | 2 +-
arch/x86/kernel/reboot.c | 8 ++++++++
5 files changed, 35 insertions(+), 18 deletions(-)
mode change 100755 => 100644 arch/x86/include/asm/cpu_debug.h
mode change 100755 => 100644 arch/x86/kernel/cpu/cpu_debug.c
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 4b34082..bc25b9f 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -252,17 +252,13 @@ config SMP
config X86_X2APIC
bool "Support x2apic"
- depends on X86_LOCAL_APIC && X86_64
- select INTR_REMAP
+ depends on X86_LOCAL_APIC && X86_64 && INTR_REMAP
---help---
This enables x2apic support on CPUs that have this feature.
This allows 32-bit apic IDs (so it can support very large systems),
and accesses the local apic via MSRs not via mmio.
- ( On certain CPU models you may need to enable INTR_REMAP too,
- to get functional x2apic mode. )
-
If you don't know what to do here, say N.
config SPARSE_IRQ
diff --git a/arch/x86/boot/video-vga.c b/arch/x86/boot/video-vga.c
index 95d86ce..9e0587a 100644
--- a/arch/x86/boot/video-vga.c
+++ b/arch/x86/boot/video-vga.c
@@ -129,22 +129,18 @@ u16 vga_crtc(void)
return (inb(0x3cc) & 1) ? 0x3d4 : 0x3b4;
}
-static void vga_set_480_scanlines(int lines)
+static void vga_set_480_scanlines(void)
{
u16 crtc; /* CRTC base address */
u8 csel; /* CRTC miscellaneous output register */
- u8 ovfw; /* CRTC overflow register */
- int end = lines-1;
crtc = vga_crtc();
- ovfw = 0x3c | ((end >> (8-1)) & 0x02) | ((end >> (9-6)) & 0x40);
-
out_idx(0x0c, crtc, 0x11); /* Vertical sync end, unlock CR0-7 */
out_idx(0x0b, crtc, 0x06); /* Vertical total */
- out_idx(ovfw, crtc, 0x07); /* Vertical overflow */
+ out_idx(0x3e, crtc, 0x07); /* Vertical overflow */
out_idx(0xea, crtc, 0x10); /* Vertical sync start */
- out_idx(end, crtc, 0x12); /* Vertical display end */
+ out_idx(0xdf, crtc, 0x12); /* Vertical display end */
out_idx(0xe7, crtc, 0x15); /* Vertical blank start */
out_idx(0x04, crtc, 0x16); /* Vertical blank end */
csel = inb(0x3cc);
@@ -153,21 +149,38 @@ static void vga_set_480_scanlines(int lines)
outb(csel, 0x3c2);
}
+static void vga_set_vertical_end(int lines)
+{
+ u16 crtc; /* CRTC base address */
+ u8 ovfw; /* CRTC overflow register */
+ int end = lines-1;
+
+ crtc = vga_crtc();
+
+ ovfw = 0x3c | ((end >> (8-1)) & 0x02) | ((end >> (9-6)) & 0x40);
+
+ out_idx(ovfw, crtc, 0x07); /* Vertical overflow */
+ out_idx(end, crtc, 0x12); /* Vertical display end */
+}
+
static void vga_set_80x30(void)
{
- vga_set_480_scanlines(30*16);
+ vga_set_480_scanlines();
+ vga_set_vertical_end(30*16);
}
static void vga_set_80x34(void)
{
+ vga_set_480_scanlines();
vga_set_14font();
- vga_set_480_scanlines(34*14);
+ vga_set_vertical_end(34*14);
}
static void vga_set_80x60(void)
{
+ vga_set_480_scanlines();
vga_set_8font();
- vga_set_480_scanlines(60*8);
+ vga_set_vertical_end(60*8);
}
static int vga_set_mode(struct mode_info *mode)
diff --git a/arch/x86/include/asm/cpu_debug.h b/arch/x86/include/asm/cpu_debug.h
old mode 100755
new mode 100644
diff --git a/arch/x86/kernel/apic/apic_flat_64.c b/arch/x86/kernel/apic/apic_flat_64.c
index 0014714..306e5e8 100644
--- a/arch/x86/kernel/apic/apic_flat_64.c
+++ b/arch/x86/kernel/apic/apic_flat_64.c
@@ -212,7 +212,7 @@ struct apic apic_flat = {
.trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH,
.wait_for_init_deassert = NULL,
.smp_callin_clear_local_apic = NULL,
- .inquire_remote_apic = NULL,
+ .inquire_remote_apic = default_inquire_remote_apic,
.read = native_apic_mem_read,
.write = native_apic_mem_write,
@@ -362,7 +362,7 @@ struct apic apic_physflat = {
.trampoline_phys_high = DEFAULT_TRAMPOLINE_PHYS_HIGH,
.wait_for_init_deassert = NULL,
.smp_callin_clear_local_apic = NULL,
- .inquire_remote_apic = NULL,
+ .inquire_remote_apic = default_inquire_remote_apic,
.read = native_apic_mem_read,
.write = native_apic_mem_write,
diff --git a/arch/x86/kernel/cpu/cpu_debug.c b/arch/x86/kernel/cpu/cpu_debug.c
old mode 100755
new mode 100644
diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c
index 3aaf7b9..c3fe010 100644
--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -65,7 +65,7 @@ static int show_other_interrupts(struct seq_file *p, int prec)
seq_printf(p, " Spurious interrupts\n");
#endif
if (generic_interrupt_extension) {
- seq_printf(p, "PLT: ");
+ seq_printf(p, "%*s: ", prec, "PLT");
for_each_online_cpu(j)
seq_printf(p, "%10u ", irq_stats(j)->generic_irqs);
seq_printf(p, " Platform interrupts\n");
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index 2aef36d..1340dad 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -224,6 +224,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "Dell XPS710"),
},
},
+ { /* Handle problems with rebooting on Dell DXP061 */
+ .callback = set_bios_reboot,
+ .ident = "Dell DXP061",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Dell DXP061"),
+ },
+ },
{ }
};
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/