Re: [Acpi4asus-user] [PATCH 1/1] cpufreq: eeepc 900 frequency scalingdriver

[Grigori Goronzy]

Matthew Garrett wrote:
> I don't think there's a terribly good reason to use the SHE methods if 
> the CPU supports speedstep. 945 will automatically drop the frontside 
> bus in the deepest P states. I'd be surprised if it gave any real world 
> benefits on the atom based systems.
> 

It does make quite a difference, especially because the chipset and CPU
are undervolted in the "powersave" preset. Also, SHE offers a slight
overclock (with the "performance" preset) which cannot be achieved with
mere multiplier switching. This is all guaranteed to be safe by Asus.

On my Eee PC 901, the idle power consumption drops from about 7W to 5.8W
when switching from "normal" to "powersave". That's about 15%. Under
load the benefit seems to be even greater.

I'm the author of a program called eee-control, which currently uses
another method to change FSB and voltage. It directly communicates with
the PLL controller over SMBus and with the embedded controller through
some I/O ports. This method works, but is not very safe and very
hardware specific. The ACPI interface of Asus' SHE abstracts all the
hardware differences away and thus would be preferred.
Anyway, my point is: my experience and reports by users show that the
difference is *huge*.

Regards,
Grigori
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/