Re: [patch 1/5] i2c: xtensa s6000 i2c driver

From: Ben Dooks
Date: Tue Mar 31 2009 - 18:57:18 EST

On Mon, Mar 23, 2009 at 04:05:14PM +0100, Daniel Gl??ckner wrote:
> From: Oskar Schirmer <os@xxxxxxxxx>
>
> Support for the s6000 on-chip i2c controller.
>
> Signed-off-by: Oskar Schirmer <os@xxxxxxxxx>
> Signed-off-by: Daniel Gl??ckner <dg@xxxxxxxxx>

Not going to merge this on my first pull request to linus, there's
a few things that I'd like to get answered before.

> ---
> drivers/i2c/busses/Kconfig | 10 +
> drivers/i2c/busses/Makefile | 1 +
> drivers/i2c/busses/i2c-s6000.c | 380 ++++++++++++++++++++++++++++++++++++++++
> drivers/i2c/busses/i2c-s6000.h | 79 +++++++++
> include/linux/i2c/s6000.h | 10 +
> 5 files changed, 480 insertions(+), 0 deletions(-)
> create mode 100644 drivers/i2c/busses/i2c-s6000.c
> create mode 100644 drivers/i2c/busses/i2c-s6000.h
> create mode 100644 include/linux/i2c/s6000.h
>
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index 7f95905..904def4 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -461,6 +461,16 @@ config I2C_S3C2410
> Say Y here to include support for I2C controller in the
> Samsung S3C2410 based System-on-Chip devices.
>
> +config I2C_S6000
> + tristate "S6000 I2C support"
> + depends on XTENSA_VARIANT_S6000
> + help
> + This driver supports the on chip I2C device on the
> + S6000 xtensa processor family.
> +
> + To compile this driver as a module, choose M here. The module
> + will be called i2c-s6000.
> +
> config I2C_SH7760
> tristate "Renesas SH7760 I2C Controller"
> depends on CPU_SUBTYPE_SH7760
> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> index 0c2c4b2..f7989d1 100644
> --- a/drivers/i2c/busses/Makefile
> +++ b/drivers/i2c/busses/Makefile
> @@ -43,6 +43,7 @@ obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o
> obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
> obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
> obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o
> +obj-$(CONFIG_I2C_S6000) += i2c-s6000.o
> obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o
> obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o
> obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o
> diff --git a/drivers/i2c/busses/i2c-s6000.c b/drivers/i2c/busses/i2c-s6000.c
> new file mode 100644
> index 0000000..88e3fdc
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-s6000.c
> @@ -0,0 +1,380 @@
> +/*
> + * drivers/i2c/busses/i2c-s6000.c
> + *
> + * Description: Driver for S6000 Family I2C Interface
> + * (c) 2008 emlix GmbH <info@xxxxxxxxx>

Note, I think you need Copyright here as well, (c) needs to be a
proper c in circle i've been informed.

> + * Author: Oskar Schirmer <os@xxxxxxxxx>
> + *
> + * Partially based on i2c-bfin-twi.c driver by <sonic.zhang@xxxxxxxxxx>
> + * Copyright (c) 2005-2007 Analog Devices, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/delay.h>
> +#include <linux/i2c.h>
> +#include <linux/i2c/s6000.h>
> +#include <linux/timer.h>
> +#include <linux/spinlock.h>
> +#include <linux/completion.h>
> +#include <linux/interrupt.h>
> +#include <linux/platform_device.h>
> +
> +#include <asm/io.h>
> +#include "i2c-s6000.h"
> +
> +#define POLL_TIMEOUT (2 * HZ)
> +

would be nice to have some documentation for each of the members
of this.

> +struct s6i2c_if {
> + u8 __iomem *reg;
> + int irq;
> + spinlock_t lock;
> + struct i2c_msg *msgs;
> + int msgs_num, msgs_push, msgs_done;
> + unsigned push, done;
> + int timeout_count;
> + struct timer_list timeout_timer;
> + struct i2c_adapter adap;
> + struct completion complete;
> + struct clk *clk;
> + struct resource *res;
> +};
> +
> +#define I2C_RD16(iface, n) readw(iface->reg + (n))
> +#define I2C_WR16(iface, n, v) writew(v, iface->reg + (n))
> +#define I2C_RD32(iface, n) readl(iface->reg + (n))
> +#define I2C_WR32(iface, n, v) writel(v, iface->reg + (n))

tried inline functions for these?

> +
> +static struct s6i2c_if s6i2c_if;
> +
> +static void s6i2c_handle_interrupt(struct s6i2c_if *iface)
> +{
> + if (I2C_RD16(iface, S6_I2C_INTRSTAT) & (1 << S6_I2C_INTR_TXABRT)) {
> + I2C_RD16(iface, S6_I2C_CLRTXABRT);
> + I2C_WR16(iface, S6_I2C_INTRMASK, 0);
> + complete(&iface->complete);
> + return;
> + }
> + if (iface->msgs_done >= iface->msgs_num) {
> + printk(KERN_DEBUG "spurious I2C irq: %x\n",
> + I2C_RD16(iface, S6_I2C_INTRSTAT));
> + I2C_WR16(iface, S6_I2C_INTRMASK, 0);
> + return;
> + }
> + while ((iface->msgs_push < iface->msgs_num)
> + && (I2C_RD16(iface, S6_I2C_STATUS) & (1 << S6_I2C_STATUS_TFNF))) {
> + struct i2c_msg *m = &iface->msgs[iface->msgs_push];
> + if (!(m->flags & I2C_M_RD))
> + I2C_WR16(iface, S6_I2C_DATACMD, m->buf[iface->push]);
> + else
> + I2C_WR16(iface, S6_I2C_DATACMD,
> + 1 << S6_I2C_DATACMD_READ);
> + if (++iface->push >= m->len) {
> + iface->push = 0;
> + iface->msgs_push += 1;
> + }
> + }
> + do {
> + struct i2c_msg *m = &iface->msgs[iface->msgs_done];
> + if (!(m->flags & I2C_M_RD)) {
> + if (iface->msgs_done < iface->msgs_push)
> + iface->msgs_done += 1;
> + else
> + break;
> + } else if (I2C_RD16(iface, S6_I2C_STATUS)
> + & (1 << S6_I2C_STATUS_RFNE)) {
> + m->buf[iface->done] = I2C_RD16(iface, S6_I2C_DATACMD);
> + if (++iface->done >= m->len) {
> + iface->done = 0;
> + iface->msgs_done += 1;
> + }
> + } else{
> + break;
> + }
> + } while (iface->msgs_done < iface->msgs_num);
> + if (iface->msgs_done >= iface->msgs_num) {
> + I2C_WR16(iface, S6_I2C_INTRMASK, 1 << S6_I2C_INTR_TXABRT);
> + complete(&iface->complete);
> + } else if (iface->msgs_push >= iface->msgs_num) {
> + I2C_WR16(iface, S6_I2C_INTRMASK, (1 << S6_I2C_INTR_TXABRT) |
> + (1 << S6_I2C_INTR_RXFULL));
> + } else {
> + I2C_WR16(iface, S6_I2C_INTRMASK, (1 << S6_I2C_INTR_TXABRT) |
> + (1 << S6_I2C_INTR_TXEMPTY) |
> + (1 << S6_I2C_INTR_RXFULL));
> + }
> +}
> +
> +static irqreturn_t s6i2c_interrupt_entry(int irq, void *dev_id)
> +{
> + struct s6i2c_if *iface = dev_id;
> + if (!(I2C_RD16(iface, S6_I2C_STATUS) & ((1 << S6_I2C_INTR_RXUNDER)
> + | (1 << S6_I2C_INTR_RXOVER)
> + | (1 << S6_I2C_INTR_RXFULL)
> + | (1 << S6_I2C_INTR_TXOVER)
> + | (1 << S6_I2C_INTR_TXEMPTY)
> + | (1 << S6_I2C_INTR_RDREQ)
> + | (1 << S6_I2C_INTR_TXABRT)
> + | (1 << S6_I2C_INTR_RXDONE)
> + | (1 << S6_I2C_INTR_ACTIVITY)
> + | (1 << S6_I2C_INTR_STOPDET)
> + | (1 << S6_I2C_INTR_STARTDET)
> + | (1 << S6_I2C_INTR_GENCALL))))
> + return IRQ_NONE;
> +
> + spin_lock(&iface->lock);
> + del_timer(&iface->timeout_timer);
> + s6i2c_handle_interrupt(iface);
> + spin_unlock(&iface->lock);
> + return IRQ_HANDLED;
> +}
> +
> +static void s6i2c_timeout(unsigned long data)
> +{
> + struct s6i2c_if *iface = (struct s6i2c_if *)data;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&iface->lock, flags);
> + s6i2c_handle_interrupt(iface);
> + if (--iface->timeout_count > 0) {
> + iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
> + add_timer(&iface->timeout_timer);
> + } else {
> + complete(&iface->complete);
> + I2C_WR16(iface, S6_I2C_INTRMASK, 0);
> + }
> + spin_unlock_irqrestore(&iface->lock, flags);
> +}
> +
> +static int s6i2c_master_xfer(struct i2c_adapter *adap,
> + struct i2c_msg *msgs, int num)
> +{
> + struct s6i2c_if *iface = adap->algo_data;
> + int i;
> + if (num == 0)
> + return 0;
> + if (I2C_RD16(iface, S6_I2C_STATUS) & (1 << S6_I2C_STATUS_ACTIVITY))
> + yield();
> + I2C_WR16(iface, S6_I2C_INTRMASK, 0);
> + I2C_RD16(iface, S6_I2C_CLRINTR);
> + for (i = 0; i < num; i++) {
> + if (msgs[i].flags & I2C_M_TEN) {
> + dev_err(&(adap->dev),
> + "s6i2c: 10 bits addr not supported\n");
> + return -EINVAL;
> + }
> + if (msgs[i].len == 0) {
> + dev_err(&(adap->dev),
> + "s6i2c: zero length message not supported\n");
> + return -EINVAL;
> + }
> + if (msgs[i].addr != msgs[0].addr) {
> + dev_err(&(adap->dev),
> + "s6i2c: multiple xfer cannot change target\n");
> + return -EINVAL;
> + }
> + }
> + iface->msgs = msgs;
> + iface->msgs_num = num;
> + iface->msgs_push = 0;
> + iface->msgs_done = 0;
> + iface->push = 0;
> + iface->done = 0;
> + iface->timeout_count = 10;
> + I2C_WR16(iface, S6_I2C_TAR, msgs[0].addr);
> + I2C_WR16(iface, S6_I2C_ENABLE, 1);
> + I2C_WR16(iface, S6_I2C_INTRMASK, (1 << S6_I2C_INTR_TXEMPTY) |
> + (1 << S6_I2C_INTR_TXABRT));
> + iface->timeout_timer.expires = jiffies + POLL_TIMEOUT;
> + add_timer(&iface->timeout_timer);
> + wait_for_completion(&iface->complete);
> + del_timer_sync(&iface->timeout_timer);
> + while (I2C_RD32(iface, S6_I2C_TXFLR) > 0)
> + schedule();
> + while (I2C_RD16(iface, S6_I2C_STATUS) & (1 << S6_I2C_STATUS_ACTIVITY))
> + schedule();
> + I2C_WR16(iface, S6_I2C_INTRMASK, 0);
> + I2C_WR16(iface, S6_I2C_ENABLE, 0);
> + return iface->msgs_done;
> +}
> +
> +static u32 s6i2c_functionality(struct i2c_adapter *adap)
> +{
> + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
> +}
> +
> +static struct i2c_algorithm s6i2c_algorithm = {
> + .master_xfer = s6i2c_master_xfer,
> + .functionality = s6i2c_functionality,
> +};
> +
> +static u16 __devinit nanoseconds_on_clk(struct s6i2c_if *iface, u32 ns)
> +{
> + u64 dividend = (u64)ns * clk_get_rate(iface->clk);
> + do_div(dividend, 1000000000);
> + if (dividend > 0xffff)
> + return 0xffff;
> + return dividend;
> +}

do you desperately need to be _that_ accurate?

> +static int __devinit s6i2c_probe(struct platform_device *dev)
> +{
> + struct s6i2c_if *iface = &s6i2c_if;
> + struct i2c_adapter *p_adap;
> + const char *clock;
> + int bus_num, rc;
> + spin_lock_init(&(iface->lock));
> + init_completion(&(iface->complete));

please don't do &(variable) it is fugly.

> + iface->irq = platform_get_irq(dev, 0);
> + if (iface->irq < 0) {
> + rc = iface->irq;
> + goto err_out;
> + }
> + iface->res = platform_get_resource(dev, IORESOURCE_MEM, 0);
> + if (!iface->res) {
> + rc = -ENXIO;
> + goto err_out;
> + }
> + iface->res = request_mem_region(iface->res->start,
> + iface->res->end - iface->res->start + 1,
> + dev->dev.bus_id);
> + if (!iface->res) {
> + rc = -EBUSY;
> + goto err_out;
> + }
> + iface->reg = ioremap_nocache(iface->res->start,
> + iface->res->end - iface->res->start + 1);
> + if (!iface->reg) {
> + rc = -ENOMEM;
> + goto err_reg;
> + }
> + clock = 0;
> + bus_num = -1;
> + if (dev->dev.platform_data) {
> + struct s6_i2c_platform_data *pdata = dev->dev.platform_data;
> + bus_num = pdata->bus_num;
> + clock = pdata->clock;
> + }
> + iface->clk = clk_get(&dev->dev, clock);
> + if (IS_ERR(iface->clk)) {
> + rc = PTR_ERR(iface->clk);
> + goto err_map;
> + }

passing the name in the platform device is a bit nasty, if there's
only one clock for the device then it should have been dealt with
at the arch level and doing clk_get(&dev->dev, NULL) should be
acceptable.

> + rc = clk_enable(iface->clk);
> + if (rc < 0)
> + goto err_clk_put;
> + init_timer(&(iface->timeout_timer));
> + iface->timeout_timer.function = s6i2c_timeout;
> + iface->timeout_timer.data = (unsigned long)iface;
> + p_adap = &iface->adap;
> + strlcpy(p_adap->name, dev->name, sizeof(p_adap->name));
> + p_adap->algo = &s6i2c_algorithm;
> + p_adap->algo_data = iface;
> + p_adap->nr = bus_num;
> + p_adap->class = 0;
> + p_adap->dev.parent = &dev->dev;

some spacing for readability would be nice.

> + I2C_WR16(iface, S6_I2C_INTRMASK, 0);
> + rc = request_irq(iface->irq, s6i2c_interrupt_entry,
> + IRQF_SHARED, dev->name, iface);
> + if (rc) {
> + dev_err(&(p_adap->dev), "s6i2c: cant get IRQ %d\n", iface->irq);
> + goto err_clk_dis;
> + }
> + I2C_WR16(iface, S6_I2C_ENABLE, 0);
> + udelay(1);
> + I2C_WR32(iface, S6_I2C_SRESET, 1 << S6_I2C_SRESET_IC_SRST);
> + I2C_WR16(iface, S6_I2C_CLRTXABRT, 1);
> + I2C_WR16(iface, S6_I2C_CON,
> + (1 << S6_I2C_CON_MASTER) |
> + (S6_I2C_CON_SPEED_NORMAL << S6_I2C_CON_SPEED) |
> + (0 << S6_I2C_CON_10BITSLAVE) |
> + (0 << S6_I2C_CON_10BITMASTER) |
> + (1 << S6_I2C_CON_RESTARTENA) |
> + (1 << S6_I2C_CON_SLAVEDISABLE));
> + I2C_WR16(iface, S6_I2C_SSHCNT, nanoseconds_on_clk(iface, 4000));
> + I2C_WR16(iface, S6_I2C_SSLCNT, nanoseconds_on_clk(iface, 4700));
> + I2C_WR16(iface, S6_I2C_FSHCNT, nanoseconds_on_clk(iface, 600));
> + I2C_WR16(iface, S6_I2C_FSLCNT, nanoseconds_on_clk(iface, 1300));
> + I2C_WR16(iface, S6_I2C_RXTL, 0);
> + I2C_WR16(iface, S6_I2C_TXTL, 0);
> + platform_set_drvdata(dev, iface);
> + if (bus_num < 0)
> + rc = i2c_add_adapter(p_adap);
> + else
> + rc = i2c_add_numbered_adapter(p_adap);
> + if (rc)
> + goto err_irq_free;
> + return 0;
> +
> +err_irq_free:
> + free_irq(iface->irq, iface);
> +err_clk_dis:
> + clk_disable(iface->clk);
> +err_clk_put:
> + clk_put(iface->clk);
> +err_map:
> + iounmap(iface->reg);
> +err_reg:
> + release_mem_region(iface->res->start,
> + iface->res->end - iface->res->start + 1);
> +err_out:
> + return rc;
> +}
> +
> +static int __devexit s6i2c_remove(struct platform_device *pdev)
> +{
> + struct s6i2c_if *iface = platform_get_drvdata(pdev);
> + I2C_WR16(iface, S6_I2C_ENABLE, 0);
> + platform_set_drvdata(pdev, NULL);
> + i2c_del_adapter(&(iface->adap));
> + free_irq(iface->irq, iface);
> + clk_disable(iface->clk);
> + clk_put(iface->clk);
> + iounmap(iface->reg);
> + release_mem_region(iface->res->start,
> + iface->res->end - iface->res->start + 1);

resource_size() would be good here, and elsewhere in the driver.

> + return 0;
> +}
> +
> +static struct platform_driver s6i2c_driver = {
> + .probe = s6i2c_probe,
> + .remove = __devexit_p(s6i2c_remove),
> + .driver = {
> + .name = "i2c-s6000",
> + .owner = THIS_MODULE,
> + },
> +};
> +
> +static int __init s6i2c_init(void)
> +{
> + pr_info("I2C: S6000 I2C driver\n");
> + return platform_driver_register(&s6i2c_driver);
> +}
> +
> +static void __exit s6i2c_exit(void)
> +{
> + platform_driver_unregister(&s6i2c_driver);
> +}
> +
> +MODULE_DESCRIPTION("I2C-Bus adapter routines for S6000 I2C");
> +MODULE_LICENSE("GPL");
> +
> +subsys_initcall(s6i2c_init);
> +module_exit(s6i2c_exit);


as a note, the code is quite dense, a few blank lines would be
nice.

> diff --git a/drivers/i2c/busses/i2c-s6000.h b/drivers/i2c/busses/i2c-s6000.h
> new file mode 100644
> index 0000000..ff23b81
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-s6000.h
> @@ -0,0 +1,79 @@
> +/*
> + * drivers/i2c/busses/i2c-s6000.h
> + *
> + * This file is subject to the terms and conditions of the GNU General Public
> + * License. See the file "COPYING" in the main directory of this archive
> + * for more details.
> + *
> + * Copyright (C) 2008 Emlix GmbH <info@xxxxxxxxx>
> + * Author: Oskar Schirmer <os@xxxxxxxxx>
> + */
> +
> +#ifndef __DRIVERS_I2C_BUSSES_I2C_S6000_H
> +#define __DRIVERS_I2C_BUSSES_I2C_S6000_H
> +
> +#define S6_I2C_CON 0x000
> +#define S6_I2C_CON_MASTER 0
> +#define S6_I2C_CON_SPEED 1
> +#define S6_I2C_CON_SPEED_NORMAL 1
> +#define S6_I2C_CON_SPEED_FAST 2
> +#define S6_I2C_CON_SPEED_MASK 3
> +#define S6_I2C_CON_10BITSLAVE 3
> +#define S6_I2C_CON_10BITMASTER 4
> +#define S6_I2C_CON_RESTARTENA 5
> +#define S6_I2C_CON_SLAVEDISABLE 6
> +#define S6_I2C_TAR 0x004
> +#define S6_I2C_TAR_GCORSTART 10
> +#define S6_I2C_TAR_SPECIAL 11
> +#define S6_I2C_SAR 0x008
> +#define S6_I2C_HSMADDR 0x00C
> +#define S6_I2C_DATACMD 0x010
> +#define S6_I2C_DATACMD_READ 8
> +#define S6_I2C_SSHCNT 0x014
> +#define S6_I2C_SSLCNT 0x018
> +#define S6_I2C_FSHCNT 0x01C
> +#define S6_I2C_FSLCNT 0x020
> +#define S6_I2C_INTRSTAT 0x02C
> +#define S6_I2C_INTRMASK 0x030
> +#define S6_I2C_RAWINTR 0x034
> +#define S6_I2C_INTR_RXUNDER 0
> +#define S6_I2C_INTR_RXOVER 1
> +#define S6_I2C_INTR_RXFULL 2
> +#define S6_I2C_INTR_TXOVER 3
> +#define S6_I2C_INTR_TXEMPTY 4
> +#define S6_I2C_INTR_RDREQ 5
> +#define S6_I2C_INTR_TXABRT 6
> +#define S6_I2C_INTR_RXDONE 7
> +#define S6_I2C_INTR_ACTIVITY 8
> +#define S6_I2C_INTR_STOPDET 9
> +#define S6_I2C_INTR_STARTDET 10
> +#define S6_I2C_INTR_GENCALL 11
> +#define S6_I2C_RXTL 0x038
> +#define S6_I2C_TXTL 0x03C
> +#define S6_I2C_CLRINTR 0x040
> +#define S6_I2C_CLRRXUNDER 0x044
> +#define S6_I2C_CLRRXOVER 0x048
> +#define S6_I2C_CLRTXOVER 0x04C
> +#define S6_I2C_CLRRDREQ 0x050
> +#define S6_I2C_CLRTXABRT 0x054
> +#define S6_I2C_CLRRXDONE 0x058
> +#define S6_I2C_CLRACTIVITY 0x05C
> +#define S6_I2C_CLRSTOPDET 0x060
> +#define S6_I2C_CLRSTARTDET 0x064
> +#define S6_I2C_CLRGENCALL 0x068
> +#define S6_I2C_ENABLE 0x06C
> +#define S6_I2C_STATUS 0x070
> +#define S6_I2C_STATUS_ACTIVITY 0
> +#define S6_I2C_STATUS_TFNF 1
> +#define S6_I2C_STATUS_TFE 2
> +#define S6_I2C_STATUS_RFNE 3
> +#define S6_I2C_STATUS_RFF 4
> +#define S6_I2C_TXFLR 0x074
> +#define S6_I2C_RXFLR 0x078
> +#define S6_I2C_SRESET 0x07C
> +#define S6_I2C_SRESET_IC_SRST 0
> +#define S6_I2C_SRESET_IC_MASTER_SRST 1
> +#define S6_I2C_SRESET_IC_SLAVE_SRST 2
> +#define S6_I2C_TXABRTSOURCE 0x080
> +
> +#endif
> diff --git a/include/linux/i2c/s6000.h b/include/linux/i2c/s6000.h

and again.

> new file mode 100644
> index 0000000..0b6b0c6
> --- /dev/null
> +++ b/include/linux/i2c/s6000.h
> @@ -0,0 +1,10 @@
> +#ifndef __LINUX_I2C_S6000_H
> +#define __LINUX_I2C_S6000_H
> +

documentation comments would be nice here too.

> +struct s6_i2c_platform_data {
> + const char *clock;
> + int bus_num;
> +};
> +
> +#endif
> +
> --
> 1.6.2.107.ge47ee
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-i2c" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html

--
Ben (ben@xxxxxxxxx, http://www.fluff.org/)

'a smiley only costs 4 bytes'
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/