Re: 2.6.29 on MacBook 2,1 fails to reboot
From: Trenton D. Adams
Date: Sun Mar 29 2009 - 23:18:55 EST
I recall it working on 2.6.28, but i didn't have vanilla sources
installed. I used 2.6.28 gentoo sources. I'm just compiling 2.6.28
as we speak, as I figured you'd ask. I've marked 2.6.29 as bad with
"git bisect". I'll let you know when I've narrowed it down for you.
Can't wait to try "git bisect" *big smile*.
On Sun, Mar 29, 2009 at 9:15 PM, Morten P.D. Stevens
<mstevens@xxxxxxxxxxxxxxxxxxxx> wrote:
> Hi,
>
> at first view your dmesg should be okay.
>
> does it reboot with 2.6.28 or lower?
>
> Morten
>
> 2009/3/30 Trenton Adams <trenton.d.adams@xxxxxxxxx>
>>
>> Oops, gmail doesn't reply to all by default.
>>
>> On Sun, Mar 29, 2009 at 8:46 PM, Morten P.D. Stevens
>> <mstevens@xxxxxxxxxxxxxxxxxxxx> wrote:
>> > Hi,
>> >
>> >> System information below. If you need more info, let me know.
>> >
>> > Please post your dmesg output.
>>
>> tdamac linux # dmesg
>> Linux version 2.6.29 (root@tdamac) (gcc version 4.1.2 (Gentoo 4.1.2
>> p1.3)) #3 SMP Sun Mar 29 19:07:55 MDT 2009
>> Command line: root=/dev/ram0 init=/linuxrc real_root=/dev/s/sys dolvm
>> KERNEL supported cpus:
>> Intel GenuineIntel
>> AMD AuthenticAMD
>> Centaur CentaurHauls
>> BIOS-provided physical RAM map:
>> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
>> BIOS-e820: 0000000000100000 - 000000007e08c000 (usable)
>> BIOS-e820: 000000007e08c000 - 000000007e28d000 (ACPI NVS)
>> BIOS-e820: 000000007e28d000 - 000000007eebe000 (ACPI data)
>> BIOS-e820: 000000007eebe000 - 000000007eeef000 (ACPI NVS)
>> BIOS-e820: 000000007eeef000 - 000000007ef00000 (ACPI data)
>> BIOS-e820: 000000007ef00000 - 0000000080000000 (reserved)
>> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
>> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
>> BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
>> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>> BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
>> DMI 2.4 present.
>> last_pfn = 0x7e08c max_arch_pfn = 0x100000000
>> init_memory_mapping: 0000000000000000-000000007e08c000
>> 0000000000 - 007e000000 page 2M
>> 007e000000 - 007e08c000 page 4k
>> kernel direct mapping tables up to 7e08c000 @ 8000-c000
>> last_map_addr: 7e08c000 end: 7e08c000
>> RAMDISK: 37edf000 - 37fef088
>> ACPI: RSDP 000FE020, 0024 (r2 APPLE )
>> ACPI: XSDT 7EEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013)
>> ACPI: FACP 7EEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F)
>> FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
>> ACPI: DSDT 7EEF0000, 41E4 (r1 APPLE MacBook 20001 INTL 20050309)
>> ACPI: FACS 7EEC0000, 0040
>> ACPI: HPET 7EEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F)
>> ACPI: APIC 7EEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F)
>> ACPI: MCFG 7EEF8000, 003C (r1 APPLE Apple00 1 Loki 5F)
>> ACPI: ASF! 7EEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F)
>> ACPI: SBST 7EEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F)
>> ACPI: ECDT 7EEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F)
>> ACPI: SSDT 7EEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309)
>> ACPI: SSDT 7EEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309)
>> ACPI: SSDT 7EEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309)
>> ACPI: Local APIC address 0xfee00000
>> (6 early reservations) ==> bootmem [0000000000 - 007e08c000]
>> #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 -
>> 0000001000]
>> #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 -
>> 0000008000]
>> #2 [0000200000 - 0000a43b8c] TEXT DATA BSS ==> [0000200000 -
>> 0000a43b8c]
>> #3 [0037edf000 - 0037fef088] RAMDISK ==> [0037edf000 -
>> 0037fef088]
>> #4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 -
>> 0000100000]
>> #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 -
>> 000000a000]
>> [ffffe20000000000-ffffe20001bfffff] PMD ->
>> [ffff880001200000-ffff880002dfffff] on node 0
>> Zone PFN ranges:
>> DMA 0x00000000 -> 0x00001000
>> DMA32 0x00001000 -> 0x00100000
>> Normal 0x00100000 -> 0x00100000
>> Movable zone start PFN for each node
>> early_node_map[2] active PFN ranges
>> 0: 0x00000000 -> 0x0000009f
>> 0: 0x00000100 -> 0x0007e08c
>> On node 0 totalpages: 516139
>> DMA zone: 56 pages used for memmap
>> DMA zone: 2216 pages reserved
>> DMA zone: 1727 pages, LIFO batch:0
>> DMA32 zone: 7002 pages used for memmap
>> DMA32 zone: 505138 pages, LIFO batch:31
>> ACPI: PM-Timer IO Port: 0x408
>> ACPI: Local APIC address 0xfee00000
>> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>> ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>> IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>> ACPI: IRQ0 used by override.
>> ACPI: IRQ2 used by override.
>> ACPI: IRQ9 used by override.
>> Using ACPI (MADT) for SMP configuration information
>> ACPI: HPET id: 0x8086a201 base: 0xfed00000
>> SMP: Allowing 2 CPUs, 0 hotplug CPUs
>> nr_irqs_gsi: 24
>> Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
>> NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
>> PERCPU: Allocating 53248 bytes of per cpu data
>> Built 1 zonelists in Zone order, mobility grouping on. Total pages:
>> 506865
>> Kernel command line: root=/dev/ram0 init=/linuxrc real_root=/dev/s/sys
>> dolvm
>> Initializing CPU#0
>> PID hash table entries: 4096 (order: 12, 32768 bytes)
>> Extended CMOS year: 2000
>> Fast TSC calibration failed
>> TSC: Unable to calibrate against PIT
>> TSC: using PMTIMER reference calibration
>> Detected 2161.212 MHz processor.
>> Console: colour VGA+ 80x25
>> console [tty0] enabled
>> Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>> Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>> Checking aperture...
>> No AGP bridge found
>> Memory: 2022216k/2064944k available (4392k kernel code, 388k absent,
>> 41684k reserved, 2619k data, 372k init)
>> SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
>> hpet clockevent registered
>> HPET: 3 timers in total, 0 timers will be used for per-cpu timer
>> Calibrating delay loop (skipped), value calculated using timer
>> frequency.. 4322.42 BogoMIPS (lpj=8644848)
>> Mount-cache hash table entries: 256
>> CPU: L1 I cache: 32K, L1 D cache: 32K
>> CPU: L2 cache: 4096K
>> [ds] using Core 2/Atom configuration
>> CPU: Physical Processor ID: 0
>> CPU: Processor Core ID: 0
>> CPU0: Thermal monitoring enabled (TM2)
>> using mwait in idle threads.
>> ACPI: Core revision 20081204
>> Setting APIC routing to flat
>> ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
>> CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
>> Booting processor 1 APIC 0x1 ip 0x6000
>> Initializing CPU#1
>> Calibrating delay using timer specific routine.. 4322.44 BogoMIPS
>> (lpj=8644898)
>> CPU: L1 I cache: 32K, L1 D cache: 32K
>> CPU: L2 cache: 4096K
>> [ds] using Core 2/Atom configuration
>> CPU: Physical Processor ID: 0
>> CPU: Processor Core ID: 1
>> CPU1: Thermal monitoring enabled (TM2)
>> CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06
>> checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>> Brought up 2 CPUs
>> Total of 2 processors activated (8644.87 BogoMIPS).
>> net_namespace: 1784 bytes
>> NET: Registered protocol family 16
>> ACPI: bus type pci registered
>> PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
>> PCI: MCFG area at f0000000 reserved in E820
>> PCI: updated MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
>> PCI: Using MMCONFIG at f0000000 - f3ffffff
>> PCI: Using configuration type 1 for base access
>> bio: create slab <bio-0> at 0
>> ACPI: EC: EC description table is found, configuring boot EC
>> ACPI: EC: non-query interrupt received, switching to interrupt mode
>> ACPI: BIOS _OSI(Linux) query ignored
>> ACPI: Interpreter enabled
>> ACPI: (supports S0 S3 S5)
>> ACPI: Using IOAPIC for interrupt routing
>> ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
>> ACPI: EC: driver started in interrupt mode
>> ACPI: No dock devices found.
>> ACPI: PCI Root Bridge [PCI0] (0000:00)
>> pci 0000:00:02.0: reg 10 32bit mmio: [0x90380000-0x903fffff]
>> pci 0000:00:02.0: reg 14 io port: [0x20e0-0x20e7]
>> pci 0000:00:02.0: reg 18 32bit mmio: [0x80000000-0x8fffffff]
>> pci 0000:00:02.0: reg 1c 32bit mmio: [0x90400000-0x9043ffff]
>> pci 0000:00:02.1: reg 10 32bit mmio: [0x90300000-0x9037ffff]
>> pci 0000:00:07.0: reg 10 32bit mmio: [0x90444000-0x90444fff]
>> pci 0000:00:1b.0: reg 10 64bit mmio: [0x90440000-0x90443fff]
>> pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
>> pci 0000:00:1b.0: PME# disabled
>> pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
>> pci 0000:00:1c.0: PME# disabled
>> pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
>> pci 0000:00:1c.1: PME# disabled
>> pci 0000:00:1d.0: reg 20 io port: [0x2080-0x209f]
>> pci 0000:00:1d.1: reg 20 io port: [0x2060-0x207f]
>> pci 0000:00:1d.2: reg 20 io port: [0x2040-0x205f]
>> pci 0000:00:1d.3: reg 20 io port: [0x2020-0x203f]
>> pci 0000:00:1d.7: reg 10 32bit mmio: [0x90445400-0x904457ff]
>> pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
>> pci 0000:00:1d.7: PME# disabled
>> pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>> pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
>> pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
>> pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 1640 (mask 000f)
>> pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0300 (mask 001f)
>> pci 0000:00:1f.1: reg 10 io port: [0x20d8-0x20df]
>> pci 0000:00:1f.1: reg 14 io port: [0x20f4-0x20f7]
>> pci 0000:00:1f.1: reg 18 io port: [0x20d0-0x20d7]
>> pci 0000:00:1f.1: reg 1c io port: [0x20f0-0x20f3]
>> pci 0000:00:1f.1: reg 20 io port: [0x20b0-0x20bf]
>> pci 0000:00:1f.2: reg 10 io port: [0x20c8-0x20cf]
>> pci 0000:00:1f.2: reg 14 io port: [0x20ec-0x20ef]
>> pci 0000:00:1f.2: reg 18 io port: [0x20c0-0x20c7]
>> pci 0000:00:1f.2: reg 1c io port: [0x20e8-0x20eb]
>> pci 0000:00:1f.2: reg 20 io port: [0x20a0-0x20af]
>> pci 0000:00:1f.2: reg 24 32bit mmio: [0x90445000-0x904453ff]
>> pci 0000:00:1f.2: PME# supported from D3hot
>> pci 0000:00:1f.2: PME# disabled
>> pci 0000:00:1f.3: reg 20 io port: [0xefa0-0xefbf]
>> pci 0000:01:00.0: reg 10 64bit mmio: [0x90200000-0x90203fff]
>> pci 0000:01:00.0: reg 18 io port: [0x1000-0x10ff]
>> pci 0000:01:00.0: reg 30 32bit mmio: [0xfffe0000-0xffffffff]
>> pci 0000:01:00.0: supports D1 D2
>> pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
>> pci 0000:01:00.0: PME# disabled
>> pci 0000:00:1c.0: bridge io port: [0x1000-0x1fff]
>> pci 0000:00:1c.0: bridge 32bit mmio: [0x90200000-0x902fffff]
>> pci 0000:02:00.0: reg 10 64bit mmio: [0x90100000-0x9010ffff]
>> pci 0000:02:00.0: supports D1
>> pci 0000:02:00.0: PME# supported from D0 D1 D3hot
>> pci 0000:02:00.0: PME# disabled
>> pci 0000:00:1c.1: bridge 32bit mmio: [0x90100000-0x901fffff]
>> pci 0000:03:03.0: reg 10 32bit mmio: [0x90000000-0x90000fff]
>> pci 0000:03:03.0: supports D1 D2
>> pci 0000:03:03.0: PME# supported from D0 D1 D2 D3hot
>> pci 0000:03:03.0: PME# disabled
>> pci 0000:00:1e.0: transparent bridge
>> pci 0000:00:1e.0: bridge 32bit mmio: [0x90000000-0x900fffff]
>> pci_bus 0000:00: on NUMA node 0
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>> ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>> ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>> ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>> ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>> ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0,
>> disabled.
>> ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0,
>> disabled.
>> ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>> ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
>> SCSI subsystem initialized
>> libata version 3.00 loaded.
>> usbcore: registered new interface driver usbfs
>> usbcore: registered new interface driver hub
>> usbcore: registered new device driver usb
>> PCI: Using ACPI for IRQ routing
>> hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>> hpet0: 3 comparators, 64-bit 14.318180 MHz counter
>> pnp: PnP ACPI init
>> ACPI: bus type pnp registered
>> pnp 00:07: io resource (0x1640-0x164f) overlaps 0000:00:1c.0 BAR 7
>> (0x1000-0x1fff), disabling
>> pnp: PnP ACPI: found 9 devices
>> ACPI: ACPI bus type pnp unregistered
>> system 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
>> system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
>> system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
>> system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
>> system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
>> system 00:01: iomem range 0xfed20000-0xfed8ffff has been reserved
>> system 00:05: iomem range 0xfed00000-0xfed003ff has been reserved
>> system 00:07: ioport range 0x680-0x6ef has been reserved
>> system 00:07: ioport range 0x800-0x80f has been reserved
>> system 00:07: ioport range 0x810-0x817 has been reserved
>> system 00:07: ioport range 0x400-0x47f has been reserved
>> system 00:07: ioport range 0x500-0x53f has been reserved
>> pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
>> pci 0000:00:1c.0: IO window: 0x1000-0x1fff
>> pci 0000:00:1c.0: MEM window: 0x90200000-0x902fffff
>> pci 0000:00:1c.0: PREFETCH window: 0x00000090500000-0x000000905fffff
>> pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
>> pci 0000:00:1c.1: IO window: disabled
>> pci 0000:00:1c.1: MEM window: 0x90100000-0x901fffff
>> pci 0000:00:1c.1: PREFETCH window: disabled
>> pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
>> pci 0000:00:1e.0: IO window: disabled
>> pci 0000:00:1e.0: MEM window: 0x90000000-0x900fffff
>> pci 0000:00:1e.0: PREFETCH window: disabled
>> pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
>> pci 0000:00:1c.0: setting latency timer to 64
>> pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
>> pci 0000:00:1c.1: setting latency timer to 64
>> pci 0000:00:1e.0: power state changed by ACPI to D0
>> pci 0000:00:1e.0: setting latency timer to 64
>> pci_bus 0000:00: resource 0 io: [0x00-0xffff]
>> pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
>> pci_bus 0000:01: resource 0 io: [0x1000-0x1fff]
>> pci_bus 0000:01: resource 1 mem: [0x90200000-0x902fffff]
>> pci_bus 0000:01: resource 2 mem: [0x90500000-0x905fffff]
>> pci_bus 0000:01: resource 3 mem: [0x0-0x0]
>> pci_bus 0000:02: resource 0 mem: [0x0-0x0]
>> pci_bus 0000:02: resource 1 mem: [0x90100000-0x901fffff]
>> pci_bus 0000:02: resource 2 mem: [0x0-0x0]
>> pci_bus 0000:02: resource 3 mem: [0x0-0x0]
>> pci_bus 0000:03: resource 0 mem: [0x0-0x0]
>> pci_bus 0000:03: resource 1 mem: [0x90000000-0x900fffff]
>> pci_bus 0000:03: resource 2 mem: [0x0-0x0]
>> pci_bus 0000:03: resource 3 io: [0x00-0xffff]
>> pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffffffffffff]
>> NET: Registered protocol family 2
>> IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>> TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>> TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>> TCP: Hash tables configured (established 262144 bind 65536)
>> TCP reno registered
>> NET: Registered protocol family 1
>> checking if image is initramfs... it is
>> Freeing initrd memory: 1088k freed
>> Microcode Update Driver: v2.00 <tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
>> HugeTLB registered 2 MB page size, pre-allocated 0 pages
>> Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
>> msgmni has been set to 3953
>> alg: No test for stdrng (krng)
>> io scheduler noop registered
>> io scheduler anticipatory registered
>> io scheduler deadline registered
>> io scheduler cfq registered (default)
>> pci 0000:00:02.0: Boot video device
>> ACPI: AC Adapter [ADP1] (on-line)
>> Switched to high resolution mode on CPU 1
>> Switched to high resolution mode on CPU 0
>> ACPI: Battery Slot [BAT0] (battery present)
>> input: Power Button (FF) as /class/input/input0
>> ACPI: Power Button (FF) [PWRF]
>> input: Lid Switch as /class/input/input1
>> ACPI: Lid Switch [LID0]
>> input: Power Button (CM) as /class/input/input2
>> ACPI: Power Button (CM) [PWRB]
>> input: Sleep Button (CM) as /class/input/input3
>> ACPI: Sleep Button (CM) [SLPB]
>> ACPI: SSDT 7EEB8C10, 02AE (r1 APPLE Cpu0Ist 3000 INTL 20050309)
>> ACPI: SSDT 7EEB8910, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309)
>> Monitor-Mwait will be used to enter C-1 state
>> Monitor-Mwait will be used to enter C-2 state
>> Monitor-Mwait will be used to enter C-3 state
>> ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>> processor ACPI_CPU:00: registered as cooling_device0
>> ACPI: Processor [CPU0] (supports 8 throttling states)
>> ACPI: SSDT 7EEB8F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309)
>> ACPI: SSDT 7EEB7F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309)
>> ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>> processor ACPI_CPU:01: registered as cooling_device1
>> ACPI: Processor [CPU1] (supports 8 throttling states)
>> Real Time Clock Driver v1.12b
>> intel_rng: FWH not detected
>> Linux agpgart interface v0.103
>> agpgart-intel 0000:00:00.0: Intel 945GM Chipset
>> agpgart-intel 0000:00:00.0: detected 16124K stolen memory
>> agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
>> intelfb: Framebuffer driver for Intel(R)
>> 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM
>> chipsets
>> intelfb: Version 0.9.6
>> intelfb 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>> intelfb: 00:02.0: Intel(R) 945GM, aperture size 256MB, stolen memory
>> 16124kB
>> intelfb: Non-CRT device is enabled ( LVDS port ). Disabling mode
>> switching.
>> intelfb: Video mode must be programmed at boot time.
>> Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
>> floppy0: no floppy controllers found
>> brd: module loaded
>> loop: module loaded
>> Intel(R) PRO/1000 Network Driver - version 7.3.21-k3-NAPI
>> Copyright (c) 1999-2006 Intel Corporation.
>> e100: Intel(R) PRO/100 Network Driver, 3.5.23-k6-NAPI
>> e100: Copyright(c) 1999-2006 Intel Corporation
>> sky2 driver version 1.22
>> sky2 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
>> sky2 0000:01:00.0: setting latency timer to 64
>> sky2 0000:01:00.0: Yukon-2 EC chip revision 2
>> sky2 0000:01:00.0: Marvell Yukon 88E8053 Gigabit Ethernet Controller
>> Part Number: Yukon 88E8053
>> Engineering Level: Rev. 2.2
>> Manufacturer: Marvell
>> sky2 0000:01:00.0: irq 24 for MSI/MSI-X
>> sky2 eth0: addr 00:19:e3:43:1c:a3
>> console [netcon0] enabled
>> netconsole: network logging started
>> Linux video capture interface: v2.00
>> usbcore: registered new interface driver uvcvideo
>> USB Video Class driver (v0.1.0)
>> Uniform Multi-Platform E-IDE driver
>> piix 0000:00:1f.1: IDE controller (0x8086:0x27df rev 0x02)
>> pci 0000:00:1f.1: power state changed by ACPI to D0
>> pci 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
>> piix 0000:00:1f.1: not 100% native mode: will probe irqs later
>> ide0: BM-DMA at 0x20b0-0x20b7
>> ide1: BM-DMA at 0x20b8-0x20bf
>> Probing IDE interface ide0...
>> hda: HL-DT-ST DVDRW GSA-S10N, ATAPI CD/DVD-ROM drive
>> hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
>> hda: UDMA/33 mode selected
>> Probing IDE interface ide1...
>> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>> ide1 at 0x170-0x177,0x376 on irq 15
>> ide_generic: please use "probe_mask=0x3f" module parameter for probing
>> all legacy ISA IDE ports
>> ide-gd driver 1.18
>> ide-cd driver 5.00
>> ide-cd: hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
>> Uniform CD-ROM driver Revision: 3.20
>> 3ware Storage Controller device driver for Linux v1.26.02.002.
>> Driver 'sd' needs updating - please use bus_type methods
>> Driver 'sr' needs updating - please use bus_type methods
>> ata_piix 0000:00:1f.2: version 2.12
>> ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>> ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ]
>> ata_piix 0000:00:1f.2: setting latency timer to 64
>> scsi0 : ata_piix
>> scsi1 : ata_piix
>> ata1: SATA max UDMA/133 cmd 0x20c8 ctl 0x20ec bmdma 0x20a0 irq 19
>> ata2: SATA max UDMA/133 cmd 0x20c0 ctl 0x20e8 bmdma 0x20a8 irq 19
>> ata1.01: ATA-7: ST9160821AS, 3.CAE, max UDMA/133
>> ata1.01: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
>> ata1.01: configured for UDMA/133
>> isa bounce pool size: 16 pages
>> scsi 0:0:1:0: Direct-Access ATA ST9160821AS 3.CA PQ: 0 ANSI:
>> 5
>> sd 0:0:1:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
>> sd 0:0:1:0: [sda] Write Protect is off
>> sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
>> sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't
>> support DPO or FUA
>> sd 0:0:1:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
>> sd 0:0:1:0: [sda] Write Protect is off
>> sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
>> sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't
>> support DPO or FUA
>> sda: sda1 sda2 sda3 sda4
>> sd 0:0:1:0: [sda] Attached SCSI disk
>> sd 0:0:1:0: Attached scsi generic sg0 type 0
>> Fusion MPT base driver 3.04.07
>> Copyright (c) 1999-2008 LSI Corporation
>> Fusion MPT SPI Host driver 3.04.07
>> ohci1394 0000:03:03.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
>> ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19]
>> MMIO=[90000000-900007ff] Max Packet=[2048] IR/IT contexts=[8/8]
>> ieee1394: raw1394: /dev/raw1394 device initialized
>> ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
>> ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>> ehci_hcd 0000:00:1d.7: setting latency timer to 64
>> ehci_hcd 0000:00:1d.7: EHCI Host Controller
>> ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>> ehci_hcd 0000:00:1d.7: debug port 1
>> ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
>> ehci_hcd 0000:00:1d.7: irq 21, io mem 0x90445400
>> ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
>> usb usb1: configuration #1 chosen from 1 choice
>> hub 1-0:1.0: USB hub found
>> hub 1-0:1.0: 8 ports detected
>> ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
>> uhci_hcd: USB Universal Host Controller Interface driver
>> uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
>> uhci_hcd 0000:00:1d.0: setting latency timer to 64
>> uhci_hcd 0000:00:1d.0: UHCI Host Controller
>> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>> uhci_hcd 0000:00:1d.0: irq 21, io base 0x00002080
>> usb usb2: configuration #1 chosen from 1 choice
>> hub 2-0:1.0: USB hub found
>> hub 2-0:1.0: 2 ports detected
>> uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
>> uhci_hcd 0000:00:1d.1: setting latency timer to 64
>> uhci_hcd 0000:00:1d.1: UHCI Host Controller
>> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>> uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002060
>> usb usb3: configuration #1 chosen from 1 choice
>> hub 3-0:1.0: USB hub found
>> hub 3-0:1.0: 2 ports detected
>> uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
>> uhci_hcd 0000:00:1d.2: setting latency timer to 64
>> uhci_hcd 0000:00:1d.2: UHCI Host Controller
>> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>> uhci_hcd 0000:00:1d.2: irq 18, io base 0x00002040
>> usb usb4: configuration #1 chosen from 1 choice
>> hub 4-0:1.0: USB hub found
>> hub 4-0:1.0: 2 ports detected
>> uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
>> uhci_hcd 0000:00:1d.3: setting latency timer to 64
>> uhci_hcd 0000:00:1d.3: UHCI Host Controller
>> uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>> uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020
>> usb usb5: configuration #1 chosen from 1 choice
>> hub 5-0:1.0: USB hub found
>> hub 5-0:1.0: 2 ports detected
>> usbcore: registered new interface driver usblp
>> Initializing USB Mass Storage driver...
>> usbcore: registered new interface driver usb-storage
>> USB Mass Storage support registered.
>> PNP: No PS/2 controller found. Probing ports directly.
>> i8042.c: No controller found.
>> mice: PS/2 mouse device common for all mice
>> device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised:
>> dm-devel@xxxxxxxxxx
>> cpuidle: using governor ladder
>> cpuidle: using governor menu
>> Marking TSC unstable due to TSC halts in idle
>> usbcore: registered new interface driver usbhid
>> usbhid: v2.6:USB HID core driver
>> oprofile: using NMI interrupt.
>> Netfilter messages via NETLINK v0.30.
>> nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
>> CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
>> nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
>> sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
>> xt_time: kernel timezone is -0000
>> ip_tables: (C) 2000-2006 Netfilter Core Team
>> arp_tables: (C) 2002 David S. Miller
>> TCP cubic registered
>> NET: Registered protocol family 10
>> IPv6 over IPv4 tunneling driver
>> NET: Registered protocol family 17
>> RPC: Registered udp transport module.
>> RPC: Registered tcp transport module.
>> registered taskstats version 1
>> Freeing unused kernel memory: 372k freed
>> usb 1-1: new high speed USB device using ehci_hcd and address 2
>> usb 1-1: configuration #1 chosen from 1 choice
>> scsi2 : SCSI emulation for USB Mass Storage devices
>> usb-storage: device found at 2
>> usb-storage: waiting for device to settle before scanning
>> usb 1-3: new high speed USB device using ehci_hcd and address 4
>> usb 1-3: configuration #1 chosen from 1 choice
>> hub 1-3:1.0: USB hub found
>> hub 1-3:1.0: 2 ports detected
>> Clocksource tsc unstable (delta = -265511863 ns)
>> usb 1-4: new high speed USB device using ehci_hcd and address 5
>> usb 1-4: configuration #1 chosen from 1 choice
>> ieee1394: Host added: ID:BUS[0-00:1023] GUID[001cb3fffe8ab416]
>> usb 2-2: new full speed USB device using uhci_hcd and address 2
>> usb 2-2: configuration #1 chosen from 1 choice
>> input: Apple Computer Apple Internal Keyboard / Trackpad as
>> /class/input/input4
>> apple 0003:05AC:021A.0001: input: USB HID v1.11 Keyboard [Apple
>> Computer Apple Internal Keyboard / Trackpad] on
>> usb-0000:00:1d.0-2/input0
>> input: Apple Computer Apple Internal Keyboard / Trackpad as
>> /class/input/input5
>> apple 0003:05AC:021A.0002: input: USB HID v1.11 Device [Apple Computer
>> Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2/input2
>> usb 4-2: new full speed USB device using uhci_hcd and address 2
>> usb 4-2: configuration #1 chosen from 1 choice
>> generic-usb 0003:05AC:8240.0003: claimed by neither input, hiddev nor
>> hidraw
>> usb 5-1: new full speed USB device using uhci_hcd and address 2
>> usb 5-1: configuration #1 chosen from 1 choice
>> input: HID 05ac:1000 as /class/input/input6
>> generic-usb 0003:05AC:1000.0004: input: USB HID v1.11 Keyboard [HID
>> 05ac:1000] on usb-0000:00:1d.3-1/input0
>> input: HID 05ac:1000 as /class/input/input7
>> generic-usb 0003:05AC:1000.0005: input: USB HID v1.11 Mouse [HID
>> 05ac:1000] on usb-0000:00:1d.3-1/input1
>> usb 1-3.1: new high speed USB device using ehci_hcd and address 8
>> usb 1-3.1: configuration #1 chosen from 1 choice
>> hub 1-3.1:1.0: USB hub found
>> hub 1-3.1:1.0: 4 ports detected
>> usb 1-3.2: new low speed USB device using ehci_hcd and address 9
>> usb 1-3.2: configuration #1 chosen from 1 choice
>> input: Logitech USB Mouse as /class/input/input8
>> generic-usb 0003:046D:C00C.0006: input: USB HID v1.10 Mouse [Logitech
>> USB Mouse] on usb-0000:00:1d.7-3.2/input0
>> usb 1-3.1.1: new high speed USB device using ehci_hcd and address 10
>> usb 1-3.1.1: configuration #1 chosen from 1 choice
>> scsi3 : SCSI emulation for USB Mass Storage devices
>> usb-storage: device found at 10
>> usb-storage: waiting for device to settle before scanning
>> usb 1-3.1.3: new high speed USB device using ehci_hcd and address 11
>> usb 1-3.1.3: configuration #1 chosen from 1 choice
>> hub 1-3.1.3:1.0: USB hub found
>> hub 1-3.1.3:1.0: 3 ports detected
>> usb 1-3.1.4: new high speed USB device using ehci_hcd and address 12
>> usb 1-3.1.4: configuration #1 chosen from 1 choice
>> scsi4 : SCSI emulation for USB Mass Storage devices
>> usb-storage: device found at 12
>> usb-storage: waiting for device to settle before scanning
>> usb 1-3.1.3.1: new low speed USB device using ehci_hcd and address 13
>> usb 1-3.1.3.1: configuration #1 chosen from 1 choice
>> input: No brand KVM as /class/input/input9
>> generic-usb 0003:10D5:5552.0007: input: USB HID v1.10 Keyboard [No
>> brand KVM] on usb-0000:00:1d.7-3.1.3.1/input0
>> input: No brand KVM as /class/input/input10
>> generic-usb 0003:10D5:5552.0008: input: USB HID v1.10 Mouse [No brand
>> KVM] on usb-0000:00:1d.7-3.1.3.1/input1
>> scsi 2:0:0:0: Direct-Access Ext Hard Disk PQ: 0 ANSI:
>> 4
>> sd 2:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
>> sd 2:0:0:0: [sdb] Write Protect is off
>> sd 2:0:0:0: [sdb] Mode Sense: 10 00 00 00
>> sd 2:0:0:0: [sdb] Assuming drive cache: write through
>> sd 2:0:0:0: [sdb] 625142448 512-byte hardware sectors: (320 GB/298 GiB)
>> sd 2:0:0:0: [sdb] Write Protect is off
>> sd 2:0:0:0: [sdb] Mode Sense: 10 00 00 00
>> sd 2:0:0:0: [sdb] Assuming drive cache: write through
>> sdb: sdb1 < sdb5 sdb6 >
>> sd 2:0:0:0: [sdb] Attached SCSI disk
>> sd 2:0:0:0: Attached scsi generic sg1 type 0
>> usb-storage: device scan complete
>> kjournald starting. Commit interval 5 seconds
>> EXT3-fs: mounted filesystem with ordered data mode.
>> udev: renamed network interface eth0 to eth1
>> scsi 3:0:0:0: Direct-Access Generic Flash HS-CF 4.44 PQ: 0 ANSI:
>> 0
>> sd 3:0:0:0: [sdc] Attached SCSI removable disk
>> sd 3:0:0:0: Attached scsi generic sg2 type 0
>> usb-storage: device scan complete
>> applesmc: Apple MacBook (v2) detected:
>> applesmc: - Model with accelerometer
>> applesmc: - Model without light sensors and backlight
>> applesmc: - Model with 10 temperature sensors
>> applesmc: device has already been initialized (0xe0, 0xf8).
>> applesmc: device successfully initialized.
>> applesmc: 1 fans found.
>> input: applesmc as /class/input/input11
>> applesmc: driver successfully loaded.
>> input: PC Speaker as /class/input/input12
>> scsi 4:0:0:0: Direct-Access Maxtor 6 L200R0 BAH4 PQ: 0 ANSI:
>> 0
>> sd 4:0:0:0: [sdd] 398297087 512-byte hardware sectors: (203 GB/189 GiB)
>> sd 4:0:0:0: [sdd] Write Protect is off
>> sd 4:0:0:0: [sdd] Mode Sense: 03 00 00 00
>> sd 4:0:0:0: [sdd] Assuming drive cache: write through
>> sd 4:0:0:0: [sdd] 398297087 512-byte hardware sectors: (203 GB/189 GiB)
>> sd 4:0:0:0: [sdd] Write Protect is off
>> sd 4:0:0:0: [sdd] Mode Sense: 03 00 00 00
>> sd 4:0:0:0: [sdd] Assuming drive cache: write through
>> sdd: sdd1
>> sd 4:0:0:0: [sdd] Attached SCSI disk
>> sd 4:0:0:0: Attached scsi generic sg3 type 0
>> usb-storage: device scan complete
>> appletouch: Geyser mode initialized.
>> input: appletouch as /class/input/input13
>> usbcore: registered new interface driver appletouch
>> HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
>> HDA Intel 0000:00:1b.0: setting latency timer to 64
>> hda_codec: STAC922x, Apple subsys_id=106b2200
>> input: HDA Intel Line In at Ext Left Jack as /class/input/input14
>> input: HDA Intel Mic at Ext Left Jack as /class/input/input15
>> input: HDA Intel HP Out at Ext Left Jack as /class/input/input16
>> EXT3 FS on dm-2, internal journal
>> fuse init (API version 7.11)
>> usbcore: registered new interface driver usbserial
>> USB Serial support registered for generic
>> usbcore: registered new interface driver usbserial_generic
>> usbserial: USB Serial Driver core
>> USB Serial support registered for pl2303
>> usbcore: registered new interface driver pl2303
>> pl2303: Prolific PL2303 USB to serial adaptor driver
>> EXT4-fs: barriers enabled
>> kjournald2 starting: pid 4443, dev dm-0:8, commit interval 5 seconds
>> EXT4 FS on dm-0, internal journal on dm-0:8
>> EXT4-fs: delayed allocation enabled
>> EXT4-fs: mballoc enabled
>> EXT4-fs: mounted filesystem dm-0 with ordered data mode
>> EXT4-fs: barriers enabled
>> kjournald2 starting: pid 4444, dev dm-4:8, commit interval 5 seconds
>> EXT4 FS on dm-4, internal journal on dm-4:8
>> EXT4-fs: delayed allocation enabled
>> EXT4-fs: mballoc enabled
>> EXT4-fs: mounted filesystem dm-4 with ordered data mode
>> EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
>> Adding 1048568k swap on /dev/mapper/s-swap. Priority:-1 extents:1
>> across:1048568k
>> sky2 eth1: enabling interface
>> ADDRCONF(NETDEV_UP): eth1: link is not ready
>> sky2 eth1: Link is up at 1000 Mbps, full duplex, flow control both
>> ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>> eth1: no IPv6 routers present
>> [drm] Initialized drm 1.1.0 20060810
>> pci 0000:00:02.0: setting latency timer to 64
>> [drm] Initialized i915 1.6.0 20080730 on minor 0
>> JBD: barrier-based sync failed on dm-0:8 - disabling barriers
>> CE: hpet increasing min_delta_ns to 15000 nsec
>> ACPI: EC: GPE storm detected, transactions will use polling mode
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/