[PATCH 2.6.29-rc7-git4-gkh] drivers/staging/rt2860: Removedependency on CFLAG RT2860
From: Mark Einon
Date: Fri Mar 13 2009 - 19:28:33 EST
From: Mark Einon <mark.einon@xxxxxxxxx>
Removed the CFLAG RT2860 from Makefile and dependency on it in the driver code.
Signed-off-by: Mark Einon <mark.einon@xxxxxxxxx>
---
drivers/staging/rt2860/Makefile | 1
drivers/staging/rt2860/common/cmm_data.c | 23 ---------
drivers/staging/rt2860/common/cmm_info.c | 6 --
drivers/staging/rt2860/common/mlme.c | 51 --------------------
drivers/staging/rt2860/common/rtmp_init.c | 29 -----------
drivers/staging/rt2860/config.mk | 4 -
drivers/staging/rt2860/rt28xx.h | 4 -
drivers/staging/rt2860/rt_ate.c | 18 -------
drivers/staging/rt2860/rt_ate.h | 6 --
drivers/staging/rt2860/rt_config.h | 2
drivers/staging/rt2860/rt_linux.c | 4 -
drivers/staging/rt2860/rt_linux.h | 16 ------
drivers/staging/rt2860/rt_main_dev.c | 12 ----
drivers/staging/rt2860/rtmp.h | 24 ---------
drivers/staging/rt2860/rtmp_def.h | 2
drivers/staging/rt2860/sta/connect.c | 12 ----
drivers/staging/rt2860/sta/dls.c | 4 -
drivers/staging/rt2860/sta/rtmp_data.c | 6 --
drivers/staging/rt2860/sta/sync.c | 10 ---
drivers/staging/rt2860/sta_ioctl.c | 4 -
20 files changed, 5 insertions(+), 233 deletions(-)
--- a/drivers/staging/rt2860/common/cmm_data.c
+++ b/drivers/staging/rt2860/common/cmm_data.c
@@ -105,9 +105,7 @@ NDIS_STATUS MiniportMMRequest(
PNDIS_PACKET pPacket;
NDIS_STATUS Status = NDIS_STATUS_SUCCESS;
ULONG FreeNum;
-#ifdef RT2860
unsigned long IrqFlags = 0;
-#endif // RT2860 //
UCHAR IrqState;
UCHAR rtmpHwHdr[TXINFO_SIZE + TXWI_SIZE]; //RTMP_HW_HDR_LEN];
@@ -118,10 +116,9 @@ NDIS_STATUS MiniportMMRequest(
// 2860C use Tx Ring
IrqState = pAd->irq_disabled;
-#ifdef RT2860
+
if ((pAd->MACVersion == 0x28600100) && (!IrqState))
RTMP_IRQ_LOCK(&pAd->irq_lock, IrqFlags);
-#endif // RT2860 //
do
{
@@ -175,17 +172,14 @@ NDIS_STATUS MiniportMMRequest(
} while (FALSE);
-#ifdef RT2860
// 2860C use Tx Ring
if ((pAd->MACVersion == 0x28600100) && (!IrqState))
RTMP_IRQ_UNLOCK(&pAd->irq_lock, IrqFlags);
-#endif // RT2860 //
return Status;
}
-#ifdef RT2860
NDIS_STATUS MiniportMMRequestUnlock(
IN PRTMP_ADAPTER pAd,
IN UCHAR QueIdx,
@@ -253,7 +247,6 @@ NDIS_STATUS MiniportMMRequestUnlock(
return Status;
}
-#endif // RT2860 //
/*
@@ -290,17 +283,14 @@ NDIS_STATUS MlmeHardTransmit(
return NDIS_STATUS_FAILURE;
}
-#ifdef RT2860
if ( pAd->MACVersion == 0x28600100 )
return MlmeHardTransmitTxRing(pAd,QueIdx,pPacket);
else
-#endif // RT2860 //
return MlmeHardTransmitMgmtRing(pAd,QueIdx,pPacket);
}
-#ifdef RT2860
NDIS_STATUS MlmeHardTransmitTxRing(
IN PRTMP_ADAPTER pAd,
IN UCHAR QueIdx,
@@ -509,7 +499,6 @@ NDIS_STATUS MlmeHardTransmitTxRing(
return NDIS_STATUS_SUCCESS;
}
-#endif // RT2860 //
NDIS_STATUS MlmeHardTransmitMgmtRing(
@@ -1076,7 +1065,6 @@ VOID RTMPDeQueuePacket(
break;
}
-#ifdef RT2860
FreeNumber[QueIdx] = GET_TXRING_FREENO(pAd, QueIdx);
#ifdef DBG_DIAGNOSE
@@ -1101,7 +1089,6 @@ VOID RTMPDeQueuePacket(
RTMPFreeTXDUponTxDmaDone(pAd, QueIdx);
FreeNumber[QueIdx] = GET_TXRING_FREENO(pAd, QueIdx);
}
-#endif // RT2860 //
// probe the Queue Head
pQueue = &pAd->TxSwQueue[QueIdx];
@@ -1180,12 +1167,10 @@ VOID RTMPDeQueuePacket(
Status = STAHardTransmit(pAd, pTxBlk, QueIdx);
#endif // CONFIG_STA_SUPPORT //
-#ifdef RT2860
DEQUEUE_UNLOCK(&pAd->irq_lock, bIntContext, IrqFlags);
// static rate also need NICUpdateFifoStaCounters() function.
//if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED))
NICUpdateFifoStaCounters(pAd);
-#endif // RT2860 //
}
RT28XX_STOP_DEQUEUE(pAd, QueIdx, IrqFlags);
@@ -1764,7 +1749,6 @@ PQUEUE_HEADER RTMPCheckTxSwQueue(
}
-#ifdef RT2860
BOOLEAN RTMPFreeTXDUponTxDmaDone(
IN PRTMP_ADAPTER pAd,
IN UCHAR QueIdx)
@@ -2309,7 +2293,6 @@ VOID DBGPRINT_RX_RING(
DBGPRINT_RAW(RT_DEBUG_TRACE,(" RxSwReadIdx [%d]=", AC0freeIdx));
DBGPRINT_RAW(RT_DEBUG_TRACE,(" pending-NDIS=%ld\n", pAd->RalinkCounters.PendingNdisPacketCount));
}
-#endif // RT2860 //
/*
========================================================================
@@ -2634,9 +2617,7 @@ MAC_TABLE_ENTRY *MacTableInsertEntry(
pEntry->AuthMode = pAd->StaCfg.AuthMode;
pEntry->WepStatus = pAd->StaCfg.WepStatus;
pEntry->PrivacyFilter = Ndis802_11PrivFilterAcceptAll;
-#ifdef RT2860
AsicRemovePairwiseKeyEntry(pAd, pEntry->apidx, (UCHAR)i);
-#endif // RT2860 //
}
#endif // CONFIG_STA_SUPPORT //
}
@@ -2823,9 +2804,7 @@ VOID MacTableReset(
for (i=1; i<MAX_LEN_OF_MAC_TABLE; i++)
{
-#ifdef RT2860
RT28XX_STA_ENTRY_MAC_RESET(pAd, i);
-#endif // RT2860 //
if (pAd->MacTab.Content[i].ValidAsCLI == TRUE)
{
--- a/drivers/staging/rt2860/common/cmm_info.c
+++ b/drivers/staging/rt2860/common/cmm_info.c
@@ -814,7 +814,6 @@ INT Show_DescInfo_Proc(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
{
-#ifdef RT2860
INT i, QueIdx=0;
PRT28XX_RXD_STRUC pRxD;
PTXD_STRUC pTxD;
@@ -845,7 +844,6 @@ INT Show_DescInfo_Proc(
hex_dump("Rx Descriptor", (char *)pRxD, 16);
printk("pRxD->DDONE = %x\n", pRxD->DDONE);
}
-#endif // RT2860 //
return TRUE;
}
@@ -1803,9 +1801,7 @@ VOID RTMPAddWcidAttributeEntry(
}
// For key index and ext IV bit, so only need to update the position(offset+3).
-#ifdef RT2860
RTMP_IO_WRITE8(pAd, offset+3, IVEIV);
-#endif // RT2860 //
DBGPRINT(RT_DEBUG_TRACE,("RTMPAddWcidAttributeEntry: WCID #%d, KeyIndex #%d, Alg=%s\n",Wcid, KeyIdx, CipherName[CipherAlg]));
DBGPRINT(RT_DEBUG_TRACE,(" WCIDAttri = 0x%x \n", WCIDAttri));
@@ -2827,9 +2823,7 @@ INT Set_OpMode_Proc(
Value = simple_strtol(arg, 0, 10);
-#ifdef RT2860
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE))
-#endif // RT2860 //
{
DBGPRINT(RT_DEBUG_ERROR, ("Can not switch operate mode on interface up !! \n"));
return FALSE;
--- a/drivers/staging/rt2860/common/mlme.c
+++ b/drivers/staging/rt2860/common/mlme.c
@@ -527,7 +527,6 @@ NDIS_STATUS MlmeInit(
#ifdef CONFIG_STA_SUPPORT
-#ifdef RT2860
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
@@ -537,7 +536,6 @@ NDIS_STATUS MlmeInit(
RTMPInitTimer(pAd, &pAd->Mlme.RadioOnOffTimer, GET_TIMER_FUNCTION(RadioOnExec), pAd, FALSE);
}
}
-#endif // RT2860 //
#endif // CONFIG_STA_SUPPORT //
} while (FALSE);
@@ -711,13 +709,11 @@ VOID MlmeHalt(
RTMPCancelTimer(&pAd->MlmeAux.AuthTimer, &Cancelled);
RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer, &Cancelled);
RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &Cancelled);
-#ifdef RT2860
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
{
RTMPCancelTimer(&pAd->Mlme.PsPollTimer, &Cancelled);
RTMPCancelTimer(&pAd->Mlme.RadioOnOffTimer, &Cancelled);
}
-#endif // RT2860 //
#ifdef QOS_DLS_SUPPORT
for (i=0; i<MAX_NUM_OF_DLS_ENTRY; i++)
@@ -822,7 +818,6 @@ VOID MlmePeriodicExec(
}
#ifdef CONFIG_STA_SUPPORT
-#ifdef RT2860
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
// If Hardware controlled Radio enabled, we have to check GPIO pin2 every 2 second.
@@ -863,7 +858,6 @@ VOID MlmePeriodicExec(
}
}
}
-#endif // RT2860 //
#endif // CONFIG_STA_SUPPORT //
// Do nothing if the driver is starting halt state.
@@ -1075,9 +1069,7 @@ VOID MlmePeriodicExec(
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
{
-#ifdef RT2860
if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST) && (pAd->bPCIclkOff == FALSE))
-#endif // RT2860 //
{
// When Adhoc beacon is enabled and RTS/CTS is enabled, there is a chance that hardware MAC FSM will run into a deadlock
// and sending CTS-to-self over and over.
@@ -5036,16 +5028,13 @@ BOOLEAN MlmeDequeue(
VOID MlmeRestartStateMachine(
IN PRTMP_ADAPTER pAd)
{
-#ifdef RT2860
MLME_QUEUE_ELEM *Elem = NULL;
-#endif // RT2860 //
#ifdef CONFIG_STA_SUPPORT
BOOLEAN Cancelled;
#endif // CONFIG_STA_SUPPORT //
DBGPRINT(RT_DEBUG_TRACE, ("MlmeRestartStateMachine \n"));
-#ifdef RT2860
NdisAcquireSpinLock(&pAd->Mlme.TaskLock);
if(pAd->Mlme.bRunning)
{
@@ -5073,7 +5062,6 @@ VOID MlmeRestartStateMachine(
DBGPRINT_ERR(("MlmeRestartStateMachine: MlmeQueue empty\n"));
}
}
-#endif // RT2860 //
#ifdef CONFIG_STA_SUPPORT
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
@@ -5122,12 +5110,10 @@ VOID MlmeRestartStateMachine(
}
#endif // CONFIG_STA_SUPPORT //
-#ifdef RT2860
// Remove running state
NdisAcquireSpinLock(&pAd->Mlme.TaskLock);
pAd->Mlme.bRunning = FALSE;
NdisReleaseSpinLock(&pAd->Mlme.TaskLock);
-#endif // RT2860 //
}
/*! \brief test if the MLME Queue is empty
@@ -6799,7 +6785,6 @@ VOID AsicEnableIbssSync(
csr9.field.bTsfTicking = 0;
RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr9.word);
-#ifdef RT2860
// move BEACON TXD and frame content to on-chip memory
ptr = (PUCHAR)&pAd->BeaconTxWI;
for (i=0; i<TXWI_SIZE; i+=4) // 16-byte TXWI field
@@ -6817,7 +6802,6 @@ VOID AsicEnableIbssSync(
RTMP_IO_WRITE32(pAd, HW_BEACON_BASE0 + TXWI_SIZE + i, longptr);
ptr +=4;
}
-#endif // RT2860 //
// start sending BEACON
csr9.field.BeaconInterval = pAd->CommonCfg.BeaconPeriod << 4; // ASIC register in units of 1/16 TU
@@ -7186,9 +7170,7 @@ VOID AsicAddSharedKeyEntry(
{
ULONG offset; //, csr0;
SHAREDKEY_MODE_STRUC csr1;
-#ifdef RT2860
INT i;
-#endif // RT2860 //
DBGPRINT(RT_DEBUG_TRACE, ("AsicAddSharedKeyEntry BssIndex=%d, KeyIdx=%d\n", BssIndex,KeyIdx));
//============================================================================================
@@ -7210,7 +7192,6 @@ VOID AsicAddSharedKeyEntry(
//
// fill key material - key + TX MIC + RX MIC
//
-#ifdef RT2860
offset = SHARED_KEY_TABLE_BASE + (4*BssIndex + KeyIdx)*HW_KEY_ENTRY_SIZE;
for (i=0; i<MAX_LEN_OF_SHARE_KEY; i++)
{
@@ -7234,7 +7215,6 @@ VOID AsicAddSharedKeyEntry(
RTMP_IO_WRITE8(pAd, offset + i, pRxMic[i]);
}
}
-#endif // RT2860 //
//
@@ -7409,9 +7389,7 @@ VOID AsicAddKeyEntry(
PUCHAR pTxtsc = pCipherKey->TxTsc;
UCHAR CipherAlg = pCipherKey->CipherAlg;
SHAREDKEY_MODE_STRUC csr1;
-#ifdef RT2860
UCHAR i;
-#endif // RT2860 //
DBGPRINT(RT_DEBUG_TRACE, ("==> AsicAddKeyEntry\n"));
//
@@ -7426,7 +7404,6 @@ VOID AsicAddKeyEntry(
// 2.) Set Key to Asic
//
//for (i = 0; i < KeyLen; i++)
-#ifdef RT2860
for (i = 0; i < MAX_LEN_OF_PEER_KEY; i++)
{
RTMP_IO_WRITE8(pAd, offset + i, pKey[i]);
@@ -7452,7 +7429,6 @@ VOID AsicAddKeyEntry(
RTMP_IO_WRITE8(pAd, offset + i, pRxMic[i]);
}
}
-#endif // RT2860 //
//
@@ -7461,7 +7437,6 @@ VOID AsicAddKeyEntry(
//
if (bTxKey)
{
-#ifdef RT2860
offset = MAC_IVEIV_TABLE_BASE + (WCID * HW_IVEIV_ENTRY_SIZE);
//
// Write IV
@@ -7484,7 +7459,6 @@ VOID AsicAddKeyEntry(
{
RTMP_IO_WRITE8(pAd, offset + i, pTxtsc[i + 2]);
}
-#endif // RT2860 //
AsicUpdateWCIDAttribute(pAd, WCID, BssIndex, CipherAlg, bUsePairewiseKeyTable);
}
@@ -7550,12 +7524,10 @@ VOID AsicAddPairwiseKeyEntry(
// EKEY
offset = PAIRWISE_KEY_TABLE_BASE + (WCID * HW_KEY_ENTRY_SIZE);
-#ifdef RT2860
for (i=0; i<MAX_LEN_OF_PEER_KEY; i++)
{
RTMP_IO_WRITE8(pAd, offset + i, pKey[i]);
}
-#endif // RT2860 //
for (i=0; i<MAX_LEN_OF_PEER_KEY; i+=4)
{
UINT32 Value;
@@ -7567,22 +7539,18 @@ VOID AsicAddPairwiseKeyEntry(
// MIC KEY
if (pTxMic)
{
-#ifdef RT2860
for (i=0; i<8; i++)
{
RTMP_IO_WRITE8(pAd, offset+i, pTxMic[i]);
}
-#endif // RT2860 //
}
offset += 8;
if (pRxMic)
{
-#ifdef RT2860
for (i=0; i<8; i++)
{
RTMP_IO_WRITE8(pAd, offset+i, pRxMic[i]);
}
-#endif // RT2860 //
}
DBGPRINT(RT_DEBUG_TRACE,("AsicAddPairwiseKeyEntry: WCID #%d Alg=%s\n",WCID, CipherName[CipherAlg]));
@@ -7631,11 +7599,9 @@ BOOLEAN AsicSendCommandToMcu(
HOST_CMD_CSR_STRUC H2MCmd;
H2M_MAILBOX_STRUC H2MMailbox;
ULONG i = 0;
-#ifdef RT2860
#ifdef RALINK_ATE
static UINT32 j = 0;
#endif // RALINK_ATE //
-#endif // RT2860 //
do
{
RTMP_IO_READ32(pAd, H2M_MAILBOX_CSR, &H2MMailbox.word);
@@ -7647,7 +7613,6 @@ BOOLEAN AsicSendCommandToMcu(
if (i >= 100)
{
-#ifdef RT2860
#ifdef RALINK_ATE
if (pAd->ate.bFWLoading == TRUE)
{
@@ -7672,7 +7637,6 @@ BOOLEAN AsicSendCommandToMcu(
}
else
#endif // RALINK_ATE //
-#endif // RT2860 //
{
UINT32 Data;
@@ -7700,7 +7664,6 @@ BOOLEAN AsicSendCommandToMcu(
//return FALSE;
}
-#ifdef RT2860
#ifdef RALINK_ATE
else if (pAd->ate.bFWLoading == TRUE)
{
@@ -7710,7 +7673,6 @@ BOOLEAN AsicSendCommandToMcu(
j = 0;
}
#endif // RALINK_ATE //
-#endif // RT2860 //
H2MMailbox.field.Owner = 1; // pass ownership to MCU
H2MMailbox.field.CmdToken = Token;
@@ -7729,7 +7691,6 @@ BOOLEAN AsicSendCommandToMcu(
return TRUE;
}
-#ifdef RT2860
BOOLEAN AsicCheckCommanOk(
IN PRTMP_ADAPTER pAd,
IN UCHAR Command)
@@ -7794,7 +7755,6 @@ BOOLEAN AsicCheckCommanOk(
return FALSE;
}
-#endif // RT2860 //
/*
========================================================================
@@ -8206,10 +8166,8 @@ VOID AsicEvaluateRxAnt(
}
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
#ifdef CONFIG_STA_SUPPORT
-#ifdef RT2860
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
pAd->StaCfg.BBPR3 = BBPR3;
-#endif // RT2860 //
#endif // CONFIG_STA_SUPPORT //
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
)
@@ -8321,9 +8279,7 @@ VOID AsicRxAntEvalTimeout(
BBPR3 |= (0x0);
}
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
-#ifdef RT2860
- pAd->StaCfg.BBPR3 = BBPR3;
-#endif // RT2860 //
+ pAd->StaCfg.BBPR3 = BBPR3;
}
#endif // CONFIG_STA_SUPPORT //
@@ -8549,10 +8505,7 @@ VOID AsicStaBbpTuning(
&& (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
)
&& !(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
-#ifdef RT2860
- && (pAd->bPCIclkOff == FALSE)
-#endif // RT2860 //
- )
+ && (pAd->bPCIclkOff == FALSE))
{
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66, &OrigR66Value);
R66 = OrigR66Value;
--- a/drivers/staging/rt2860/common/rtmp_init.c
+++ b/drivers/staging/rt2860/common/rtmp_init.c
@@ -149,9 +149,7 @@ RTMP_REG_PAIR MACRegTable[] = {
{GF20_PROT_CFG, 0x01744004}, // set 19:18 --> Short NAV for MIMO PS
{GF40_PROT_CFG, 0x03F44084},
{MM20_PROT_CFG, 0x01744004},
-#ifdef RT2860
{MM40_PROT_CFG, 0x03F54084},
-#endif // RT2860 //
{TXOP_CTRL_CFG, 0x0000583f, /*0x0000243f*/ /*0x000024bf*/}, //Extension channel backoff.
{TX_RTS_CFG, 0x00092b20},
{EXP_ACK_TIME, 0x002400ca}, // default value
@@ -188,9 +186,7 @@ RTMP_REG_PAIR STAMACRegTable[] = {
#define FIRMWAREIMAGEV1_LENGTH 0x1000
#define FIRMWAREIMAGEV2_LENGTH 0x1000
-#ifdef RT2860
#define FIRMWARE_MINOR_VERSION 2
-#endif // RT2860 //
/*
@@ -248,9 +244,7 @@ NDIS_STATUS RTMPAllocAdapterBlock(
// Init spin locks
NdisAllocateSpinLock(&pAd->MgmtRingLock);
-#ifdef RT2860
NdisAllocateSpinLock(&pAd->RxRingLock);
-#endif // RT2860 //
for (index =0 ; index < NUM_OF_TX_RING; index++)
{
@@ -1555,10 +1549,7 @@ VOID NICInitAsicFromEEPROM(
pAd->LedCntl.word = 0x01;
pAd->Led1 = 0x5555;
pAd->Led2 = 0x2221;
-
-#ifdef RT2860
pAd->Led3 = 0xA9F8;
-#endif // RT2860 //
}
AsicSendCommandToMcu(pAd, 0x52, 0xff, (UCHAR)pAd->Led1, (UCHAR)(pAd->Led1 >> 8));
@@ -1594,12 +1585,10 @@ VOID NICInitAsicFromEEPROM(
else
{
RTMPSetLED(pAd, LED_RADIO_ON);
-#ifdef RT2860
AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x02);
AsicSendCommandToMcu(pAd, 0x31, PowerWakeCID, 0x00, 0x00);
// 2-1. wait command ok.
AsicCheckCommanOk(pAd, PowerWakeCID);
-#endif // RT2860 //
}
}
#endif // CONFIG_STA_SUPPORT //
@@ -1677,10 +1666,8 @@ NDIS_STATUS NICInitializeAdapter(
{
NDIS_STATUS Status = NDIS_STATUS_SUCCESS;
WPDMA_GLO_CFG_STRUC GloCfg;
-#ifdef RT2860
UINT32 Value;
DELAY_INT_CFG_STRUC IntCfg;
-#endif // RT2860 //
ULONG i =0, j=0;
AC_TXOP_CSR0_STRUC csr0;
@@ -1719,11 +1706,9 @@ retry:
// asic simulation sequence put this ahead before loading firmware.
// pbf hardware reset
-#ifdef RT2860
RTMP_IO_WRITE32(pAd, WPDMA_RST_IDX, 0x1003f); // 0x10000 for reset rx, 0x3f resets all 6 tx rings.
RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0xe1f);
RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0xe00);
-#endif // RT2860 //
// Initialze ASIC for TX & Rx operation
if (NICInitializeAsic(pAd , bHardReset) != NDIS_STATUS_SUCCESS)
@@ -1737,7 +1722,6 @@ retry:
}
-#ifdef RT2860
// Write AC_BK base address register
Value = RTMP_GetPhysicalAddressLow(pAd->TxRing[QID_AC_BK].Cell[0].AllocPa);
RTMP_IO_WRITE32(pAd, TX_BASE_PTR1, Value);
@@ -1810,7 +1794,6 @@ retry:
// Write RX_RING_CSR register
Value = RX_RING_SIZE;
RTMP_IO_WRITE32(pAd, RX_MAX_CNT, Value);
-#endif // RT2860 //
// WMM parameter
@@ -1829,7 +1812,6 @@ retry:
RTMP_IO_WRITE32(pAd, WMM_TXOP1_CFG, csr0.word);
-#ifdef RT2860
// 3. Set DMA global configuration except TX_DMA_EN and RX_DMA_EN bits:
i = 0;
do
@@ -1848,7 +1830,6 @@ retry:
IntCfg.word = 0;
RTMP_IO_WRITE32(pAd, DELAY_INT_CFG, IntCfg.word);
-#endif // RT2860 //
// reset action
@@ -1889,7 +1870,6 @@ NDIS_STATUS NICInitializeAsic(
DBGPRINT(RT_DEBUG_TRACE, ("--> NICInitializeAsic\n"));
-#ifdef RT2860
if (bHardReset == TRUE)
{
RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x3);
@@ -1914,7 +1894,6 @@ NDIS_STATUS NICInitializeAsic(
}
}
#endif // CONFIG_STA_SUPPORT //
-#endif // RT2860 //
//
@@ -3153,12 +3132,10 @@ VOID UserCfgInit(
pAd->CommonCfg.BBPCurrentBW = BW_20;
pAd->LedCntl.word = 0;
-#ifdef RT2860
pAd->LedIndicatorStregth = 0;
pAd->RLnkCtrlOffset = 0;
pAd->HostLnkCtrlOffset = 0;
pAd->CheckDmaBusyCount = 0;
-#endif // RT2860 //
pAd->bAutoTxAgcA = FALSE; // Default is OFF
pAd->bAutoTxAgcG = FALSE; // Default is OFF
@@ -3418,9 +3395,7 @@ VOID UserCfgInit(
pAd->ate.bRxFer = 0;
pAd->ate.bQATxStart = FALSE;
pAd->ate.bQARxStart = FALSE;
-#ifdef RT2860
pAd->ate.bFWLoading = FALSE;
-#endif // RT2860 //
#ifdef RALINK_28xx_QA
//pAd->ate.Repeat = 0;
pAd->ate.TxStatus = 0;
@@ -3430,9 +3405,7 @@ VOID UserCfgInit(
pAd->CommonCfg.bWiFiTest = FALSE;
-#ifdef RT2860
- pAd->bPCIclkOff = FALSE;
-#endif // RT2860 //
+ pAd->bPCIclkOff = FALSE;
RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
DBGPRINT(RT_DEBUG_TRACE, ("<-- UserCfgInit\n"));
--- a/drivers/staging/rt2860/config.mk
+++ b/drivers/staging/rt2860/config.mk
@@ -108,10 +108,6 @@ ifeq ($(HAS_EXT_BUILD_CHANNEL_LIST),y)
WFLAGS += -DEXT_BUILD_CHANNEL_LIST
endif
-ifeq ($(CHIPSET),2860)
-WFLAGS +=-DRT2860
-endif
-
ifeq ($(CHIPSET),2870)
WFLAGS +=-DRT2870
endif
--- a/drivers/staging/rt2860/Makefile
+++ b/drivers/staging/rt2860/Makefile
@@ -2,7 +2,6 @@ obj-$(CONFIG_RT2860) += rt2860sta.o
# TODO: all of these should be removed
EXTRA_CFLAGS += -DLINUX -DAGGREGATION_SUPPORT -DPIGGYBACK_SUPPORT -DWMM_SUPPORT
-EXTRA_CFLAGS += -DRT2860
EXTRA_CFLAGS += -DCONFIG_STA_SUPPORT
EXTRA_CFLAGS += -DDBG
EXTRA_CFLAGS += -DDOT11_N_SUPPORT
--- a/drivers/staging/rt2860/rt28xx.h
+++ b/drivers/staging/rt2860/rt28xx.h
@@ -1670,11 +1670,9 @@ typedef struct _HW_WCID_ENTRY { // 8-by
#define E2PROM_CSR 0x0004
#define IO_CNTL_CSR 0x77d0
-#ifdef RT2860
// 8051 firmware image for RT2860 - base address = 0x4000
#define FIRMWARE_IMAGE_BASE 0x2000
#define MAX_FIRMWARE_IMAGE_SIZE 0x2000 // 8kbyte
-#endif // RT2860 //
// ================================================================
@@ -2029,7 +2027,6 @@ typedef struct PACKED _TXWI_STRUC {
//
// Rx descriptor format, Rx Ring
//
-#ifdef RT2860
#ifdef RT_BIG_ENDIAN
typedef struct PACKED _RXD_STRUC {
// Word 0
@@ -2098,7 +2095,6 @@ typedef struct PACKED _RXD_STRUC {
UINT32 Rsv1:13;
} RXD_STRUC, *PRXD_STRUC, RT28XX_RXD_STRUC, *PRT28XX_RXD_STRUC;
#endif
-#endif // RT2860 //
//
// RXWI wireless information format, in PBF. invisible in driver.
//
--- a/drivers/staging/rt2860/rt_ate.c
+++ b/drivers/staging/rt2860/rt_ate.c
@@ -68,7 +68,6 @@ static int CheckMCSValid(
IN UCHAR Mode,
IN UCHAR Mcs);
-#ifdef RT2860
static VOID ATEWriteTxWI(
IN PRTMP_ADAPTER pAd,
IN PTXWI_STRUC pOutTxWI,
@@ -87,7 +86,6 @@ static VOID ATEWriteTxWI(
IN UCHAR Txopmode,
IN BOOLEAN CfAck,
IN HTTRANSMIT_SETTING *pTransmit);
-#endif // RT2860 //
static VOID SetJapanFilter(
@@ -95,7 +93,6 @@ static VOID SetJapanFilter(
/*=========================end of prototype=========================*/
-#ifdef RT2860
static INT TxDmaBusy(
IN PRTMP_ADAPTER pAd)
{
@@ -153,7 +150,6 @@ static VOID RtmpDmaEnable(
return;
}
-#endif // RT2860 //
static VOID BbpSoftReset(
@@ -488,7 +484,6 @@ static INT ATETxPwrHandler(
TRUE if all parameters are OK, FALSE otherwise
==========================================================================
*/
-#ifdef RT2860
static INT ATECmdHandler(
IN PRTMP_ADAPTER pAd,
IN PUCHAR arg)
@@ -1297,7 +1292,6 @@ static INT ATECmdHandler(
return TRUE;
}
-#endif // RT2860 //
/* */
/* */
/*=======================End of RT2860=======================*/
@@ -2907,7 +2901,6 @@ VOID ATEAsicAdjustTxPower(
None
========================================================================
*/
-#ifdef RT2860
static VOID ATEWriteTxWI(
IN PRTMP_ADAPTER pAd,
IN PTXWI_STRUC pOutTxWI,
@@ -2972,7 +2965,6 @@ static VOID ATEWriteTxWI(
return;
}
-#endif // RT2860 //
/*
========================================================================
@@ -3249,13 +3241,11 @@ VOID RTMPStationStart(
IN PRTMP_ADAPTER pAd)
{
ATEDBGPRINT(RT_DEBUG_TRACE, ("==> RTMPStationStart\n"));
-#ifdef RT2860
- pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
+epAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
//
// We did not cancel this timer when entering ATE mode.
//
// RTMPSetTimer(&pAd->Mlme.PeriodicTimer, MLME_TASK_EXEC_INTV);
-#endif // RT2860 //
ATEDBGPRINT(RT_DEBUG_TRACE, ("<== RTMPStationStart\n"));
}
#endif // CONFIG_STA_SUPPORT //
@@ -3268,7 +3258,6 @@ VOID RTMPStationStart(
This routine should only be used in ATE mode.
==========================================================================
*/
-#ifdef RT2860
static INT ATESetUpFrame(
IN PRTMP_ADAPTER pAd,
IN UINT32 TxIdx)
@@ -3455,7 +3444,6 @@ static INT ATESetUpFrame(
/* */
/* */
/*=======================End of RT2860=======================*/
-#endif // RT2860 //
VOID rt_ee_read_all(PRTMP_ADAPTER pAd, USHORT *Data)
@@ -4578,9 +4566,7 @@ VOID RtmpDoAte(
{
if (pAdapter->ate.TxCount == 0)
{
-#ifdef RT2860
pAdapter->ate.TxCount = 0xFFFFFFFF;
-#endif // RT2860 //
}
ATEDBGPRINT(RT_DEBUG_TRACE,("START TXFRAME\n"));
pAdapter->ate.bQATxStart = TRUE;
@@ -5375,7 +5361,6 @@ TX_START_ERROR:
memcpy((PUCHAR)&value, (PUCHAR)&(pRaCfg->status), 2);
value = ntohs(value);
-#ifdef RT2860
/* TX_FRAME_COUNT == 0 means tx infinitely */
if (value == 0)
{
@@ -5387,7 +5372,6 @@ TX_START_ERROR:
}
else
-#endif // RT2860 //
{
sprintf((PCHAR)str, "%d", value);
Set_ATE_TX_COUNT_Proc(pAdapter, str);
--- a/drivers/staging/rt2860/rt_ate.h
+++ b/drivers/staging/rt2860/rt_ate.h
@@ -31,12 +31,10 @@
#ifndef UCOS
#define ate_print printk
#define ATEDBGPRINT DBGPRINT
-#ifdef RT2860
#define EEPROM_SIZE 0x200
#ifdef CONFIG_STA_SUPPORT
#define EEPROM_BIN_FILE_NAME "/etc/Wireless/RT2860STA/e2p.bin"
#endif // CONFIG_STA_SUPPORT //
-#endif // RT2860 //
#else // !UCOS //
#define fATE_LOAD_EEPROM 0x0C43
@@ -69,7 +67,6 @@ do{ int (*org_remote_display)(char *)
#define ATE_ON(_p) (((_p)->ate.Mode) != ATE_STOP)
/* RT2880_iNIC will define "RT2860". */
-#ifdef RT2860
#define ATE_BBP_IO_READ8_BY_REG_ID(_A, _I, _pV) \
{ \
BBP_CSR_CFG_STRUC BbpCsr; \
@@ -131,10 +128,8 @@ do{ int (*org_remote_display)(char *)
ATEDBGPRINT(RT_DEBUG_ERROR, ("BBP write R%d fail\n", _I)); \
} \
}
-#endif // RT2860 //
/* RT2880_iNIC will define RT2860. */
-#ifdef RT2860
#define EEPROM_SIZE 0x200
/* iNIC has its own EEPROM_BIN_FILE_NAME */
#ifndef UCOS
@@ -142,7 +137,6 @@ do{ int (*org_remote_display)(char *)
#define EEPROM_BIN_FILE_NAME "/etc/Wireless/RT2860STA/e2p.bin"
#endif // CONFIG_STA_SUPPORT //
#endif // !UCOS //
-#endif // RT2860 //
--- a/drivers/staging/rt2860/rt_config.h
+++ b/drivers/staging/rt2860/rt_config.h
@@ -53,9 +53,7 @@
#include "rtmp_def.h"
#include "rt28xx.h"
-#ifdef RT2860
#include "rt2860.h"
-#endif // RT2860 //
#include "oid.h"
--- a/drivers/staging/rt2860/rt_linux.c
+++ b/drivers/staging/rt2860/rt_linux.c
@@ -48,10 +48,8 @@ BUILD_TIMER_FUNCTION(LeapAuthTimeout);
#endif
BUILD_TIMER_FUNCTION(StaQuickResponeForRateUpExec);
BUILD_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc);
-#ifdef RT2860
BUILD_TIMER_FUNCTION(PsPollWakeExec);
BUILD_TIMER_FUNCTION(RadioOnExec);
-#endif // RT2860 //
#ifdef QOS_DLS_SUPPORT
BUILD_TIMER_FUNCTION(DlsTimeoutAction);
#endif // QOS_DLS_SUPPORT //
@@ -293,9 +291,7 @@ VOID RTMPFreeAdapter(
NdisFreeSpinLock(&pAd->MgmtRingLock);
-#ifdef RT2860
NdisFreeSpinLock(&pAd->RxRingLock);
-#endif // RT2860 //
for (index =0 ; index < NUM_OF_TX_RING; index++)
{
--- a/drivers/staging/rt2860/rt_linux.h
+++ b/drivers/staging/rt2860/rt_linux.h
@@ -89,7 +89,6 @@ typedef int (*HARD_START_XMIT_FUNC)(stru
// add by kathy
#ifdef CONFIG_STA_SUPPORT
-#ifdef RT2860
#define STA_PROFILE_PATH "/etc/Wireless/RT2860STA/RT2860STA.dat"
#define STA_RTMP_FIRMWARE_FILE_NAME "/etc/Wireless/RT2860STA/RT2860STA.bin"
#define STA_NIC_DEVICE_NAME "RT2860STA"
@@ -97,18 +96,15 @@ typedef int (*HARD_START_XMIT_FUNC)(stru
#ifdef MULTIPLE_CARD_SUPPORT
#define CARD_INFO_PATH "/etc/Wireless/RT2860STA/RT2860STACard.dat"
#endif // MULTIPLE_CARD_SUPPORT //
-#endif // RT2860 //
#endif // CONFIG_STA_SUPPORT //
-#ifdef RT2860
#ifndef PCI_DEVICE
#define PCI_DEVICE(vend,dev) \
.vendor = (vend), .device = (dev), \
.subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID
#endif // PCI_DEVICE //
-#endif // RT2860 //
#define RTMP_TIME_AFTER(a,b) \
(typecheck(unsigned long, (unsigned long)a) && \
@@ -174,11 +170,9 @@ struct os_lock {
struct os_cookie {
-#ifdef RT2860
struct pci_dev *pci_dev;
struct pci_dev *parent_pci_dev;
dma_addr_t pAd_pa;
-#endif // RT2860 //
struct tasklet_struct rx_done_task;
@@ -189,9 +183,7 @@ struct os_cookie {
struct tasklet_struct ac3_dma_done_task;
struct tasklet_struct hcca_dma_done_task;
struct tasklet_struct tbtt_task;
-#ifdef RT2860
struct tasklet_struct fifo_statistic_full_task;
-#endif // RT2860 //
unsigned long apd_pid; //802.1x daemon pid
@@ -246,7 +238,6 @@ void linux_pci_unmap_single(void *handle
#define RT2860_PCI_DEVICE_ID 0x0601
-#ifdef RT2860
#define PCI_MAP_SINGLE(_handle, _ptr, _size, _sd_idx, _dir) \
linux_pci_map_single(_handle, _ptr, _size, _sd_idx, _dir)
@@ -261,7 +252,6 @@ void linux_pci_unmap_single(void *handle
#define DEV_ALLOC_SKB(_length) \
dev_alloc_skb(_length)
-#endif // RT2860 //
@@ -381,7 +371,6 @@ extern ULONG RTDebugLevel;
spin_unlock_irqrestore((spinlock_t *)(__lock), ((unsigned long)__irqflag)); \
}
-#ifdef RT2860
#if defined(INF_TWINPASS) || defined(INF_DANUBE) || defined(IKANOS_VX_1X0)
//Patch for ASIC turst read/write bug, needs to remove after metel fix
#define RTMP_IO_READ32(_A, _R, _pV) \
@@ -483,7 +472,6 @@ extern ULONG RTDebugLevel;
writew((_V), (PUSHORT)((_A)->CSRBaseAddress + (_R))); \
}
#endif
-#endif // RT2860 //
#ifndef wait_event_interruptible_timeout
@@ -535,7 +523,6 @@ typedef void (*TIMER_FUNCTION)(unsigned
#define MlmeAllocateMemory(_pAd, _ppVA) os_alloc_mem(_pAd, _ppVA, MGMT_DMA_BUFFER_SIZE)
#define MlmeFreeMemory(_pAd, _pVA) os_free_mem(_pAd, _pVA)
-#ifdef RT2860
#define BUILD_TIMER_FUNCTION(_func) \
void linux_##_func(unsigned long data) \
{ \
@@ -545,7 +532,6 @@ void linux_##_func(unsigned long data)
if (pTimer->Repeat) \
RTMP_OS_Add_Timer(&pTimer->TimerObj, pTimer->TimerValue); \
}
-#endif // RT2860 //
@@ -898,7 +884,6 @@ int rt28xx_packet_xmit(struct sk_buff *s
void rtmp_os_thread_init(PUCHAR pThreadName, PVOID pNotify);
-#ifdef RT2860
#if !defined(PCI_CAP_ID_EXP)
#define PCI_CAP_ID_EXP 0x10
#endif
@@ -912,6 +897,5 @@ void rtmp_os_thread_init(PUCHAR pThreadN
#endif
#define PCIBUS_INTEL_VENDOR 0x8086
-#endif // RT2860 //
--- a/drivers/staging/rt2860/rt_main_dev.c
+++ b/drivers/staging/rt2860/rt_main_dev.c
@@ -71,9 +71,7 @@ extern void ba_reordering_resource_relea
#endif // DOT11_N_SUPPORT //
extern NDIS_STATUS NICLoadRateSwitchingParams(IN PRTMP_ADAPTER pAd);
-#ifdef RT2860
extern void init_thread_task(PRTMP_ADAPTER pAd);
-#endif // RT2860 //
// public function prototype
INT __devinit rt28xx_probe(IN void *_dev_p, IN void *_dev_id_p,
@@ -310,9 +308,7 @@ int rt28xx_close(IN PNET_DEV dev)
#endif // WPA_SUPPLICANT_SUPPORT //
MlmeRadioOff(pAd);
-#ifdef RT2860
pAd->bPCIclkOff = FALSE;
-#endif // RT2860 //
}
#endif // CONFIG_STA_SUPPORT //
@@ -346,7 +342,6 @@ int rt28xx_close(IN PNET_DEV dev)
TpcReqTabExit(pAd);
-#ifdef RT2860
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE))
{
NICDisableInterrupt(pAd);
@@ -362,7 +357,6 @@ int rt28xx_close(IN PNET_DEV dev)
RT28XX_IRQ_RELEASE(net_dev)
RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_IN_USE);
}
-#endif // RT2860 //
// Free Ring or USB buffers
@@ -426,12 +420,10 @@ static int rt28xx_init(IN struct net_dev
// Disable interrupts here which is as soon as possible
// This statement should never be true. We might consider to remove it later
-#ifdef RT2860
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE))
{
NICDisableInterrupt(pAd);
}
-#endif // RT2860 //
Status = RTMPAllocTxRxRingMemory(pAd);
if (Status != NDIS_STATUS_SUCCESS)
@@ -720,10 +712,8 @@ int rt28xx_open(IN PNET_DEV dev)
}
#ifdef CONFIG_STA_SUPPORT
-#ifdef RT2860
IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
RTMPInitPCIeLinkCtrlValue(pAd);
-#endif // RT2860 //
#endif // CONFIG_STA_SUPPORT //
return (retval);
@@ -1203,9 +1193,7 @@ INT __devinit rt28xx_probe(
PRTMP_ADAPTER pAd = (PRTMP_ADAPTER) NULL;
INT status;
PVOID handle;
-#ifdef RT2860
struct pci_dev *dev_p = (struct pci_dev *)_dev_p;
-#endif // RT2860 //
#ifdef CONFIG_STA_SUPPORT
--- a/drivers/staging/rt2860/rtmp_def.h
+++ b/drivers/staging/rt2860/rtmp_def.h
@@ -111,7 +111,6 @@
// Entry number for each DMA descriptor ring
//
-#ifdef RT2860
#define TX_RING_SIZE 64 //64
#define MGMT_RING_SIZE 128
#define RX_RING_SIZE 128 //64
@@ -119,7 +118,6 @@
#define MAX_DMA_DONE_PROCESS TX_RING_SIZE
#define MAX_TX_DONE_PROCESS TX_RING_SIZE //8
#define LOCAL_TXBUF_SIZE 2
-#endif // RT2860 //
#ifdef MULTIPLE_CARD_SUPPORT
--- a/drivers/staging/rt2860/rtmp.h
+++ b/drivers/staging/rt2860/rtmp.h
@@ -203,9 +203,7 @@ typedef struct _ATE_INFO {
BOOLEAN bRxFer;
BOOLEAN bQATxStart; // Have compiled QA in and use it to ATE tx.
BOOLEAN bQARxStart; // Have compiled QA in and use it to ATE rx.
-#ifdef RT2860
BOOLEAN bFWLoading; // Reload firmware when ATE is done.
-#endif // RT2860 //
UINT32 RxTotalCnt;
UINT32 RxCntPerSec;
@@ -485,7 +483,6 @@ typedef struct _QUEUE_HEADER {
//
#define MAX_BUSY_COUNT 100 // Number of retry before failing access BBP & RF indirect register
//
-#ifdef RT2860
#define RTMP_RF_IO_WRITE32(_A, _V) \
{ \
PHY_CSR4_STRUC Value; \
@@ -649,7 +646,6 @@ typedef struct _QUEUE_HEADER {
} \
} \
}
-#endif // RT2860 //
#define MAP_CHANNEL_ID_TO_KHZ(ch, khz) { \
@@ -901,7 +897,6 @@ typedef struct _RTMP_SCATTER_GATHER_LIST
// Enqueue this frame to MLME engine
// We need to enqueue the whole frame because MLME need to pass data type
// information from 802.11 header
-#ifdef RT2860
#define REPORT_MGMT_FRAME_TO_MLME(_pAd, Wcid, _pFrame, _FrameSize, _Rssi0, _Rssi1, _Rssi2, _PlcpSignal) \
{ \
UINT32 High32TSF, Low32TSF; \
@@ -909,7 +904,6 @@ typedef struct _RTMP_SCATTER_GATHER_LIST
RTMP_IO_READ32(_pAd, TSF_TIMER_DW0, &Low32TSF); \
MlmeEnqueueForRecv(_pAd, Wcid, High32TSF, Low32TSF, (UCHAR)_Rssi0, (UCHAR)_Rssi1,(UCHAR)_Rssi2,_FrameSize, _pFrame, (UCHAR)_PlcpSignal); \
}
-#endif // RT2860 //
#define NDIS_QUERY_BUFFER(_NdisBuf, _ppVA, _pBufLen) \
NdisQueryBuffer(_NdisBuf, _ppVA, _pBufLen)
@@ -1008,9 +1002,7 @@ typedef struct _RTMP_REORDERBUF
UCHAR DataOffset;
USHORT Datasize;
ULONG AllocSize;
-#ifdef RT2860
NDIS_PHYSICAL_ADDRESS AllocPa; // TxBuf physical address
-#endif // RT2860 //
} RTMP_REORDERBUF, *PRTMP_REORDERBUF;
//
@@ -1445,11 +1437,9 @@ typedef struct _MLME_STRUCT {
RALINK_TIMER_STRUCT APSDPeriodicTimer;
RALINK_TIMER_STRUCT LinkDownTimer;
RALINK_TIMER_STRUCT LinkUpTimer;
-#ifdef RT2860
UCHAR bPsPollTimerRunning;
RALINK_TIMER_STRUCT PsPollTimer;
RALINK_TIMER_STRUCT RadioOnOffTimer;
-#endif // RT2860 //
ULONG PeriodicRound;
ULONG OneSecPeriodicRound;
@@ -2237,9 +2227,7 @@ typedef struct _STA_ADMIN_CONFIG {
RT_HT_PHY_INFO DesiredHtPhyInfo;
BOOLEAN bAutoTxRateSwitch;
-#ifdef RT2860
UCHAR BBPR3;
-#endif // RT2860 //
#ifdef EXT_BUILD_CHANNEL_LIST
UCHAR IEEE80211dClientMode;
@@ -2672,7 +2660,6 @@ typedef struct _RTMP_ADAPTER
PNET_DEV net_dev;
ULONG VirtualIfCnt;
-#ifdef RT2860
USHORT LnkCtrlBitMask;
USHORT RLnkCtrlConfiguration;
USHORT RLnkCtrlOffset;
@@ -2699,7 +2686,6 @@ typedef struct _RTMP_ADAPTER
RTMP_DMABUF RxDescRing; // Shared memory for RX descriptors
RTMP_DMABUF TxDescRing[NUM_OF_TX_RING]; // Shared memory for Tx descriptors
RTMP_TX_RING TxRing[NUM_OF_TX_RING]; // AC0~4 + HCCA
-#endif // RT2860 //
NDIS_SPIN_LOCK irq_lock;
@@ -2732,10 +2718,8 @@ typedef struct _RTMP_ADAPTER
/* Rx related parameters */
/*****************************************************************************************/
-#ifdef RT2860
RTMP_RX_RING RxRing;
NDIS_SPIN_LOCK RxRingLock; // Rx Ring spinlock
-#endif // RT2860 //
@@ -3193,7 +3177,6 @@ typedef struct _TX_BLK_
//------------------------------------------------------------------------------------------
-#ifdef RT2860
//
// Enable & Disable NIC interrupt via writing interrupt mask register
// Since it use ADAPTER structure, it have to be put after structure definition.
@@ -3226,7 +3209,6 @@ __inline VOID NICEnableInterrupt(
//RTMP_IO_WRITE32(pAd, PBF_INT_ENA, 0x00000030); // 1 : enable
RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_INTERRUPT_ACTIVE);
}
-#endif // RT2860 //
#ifdef RT_BIG_ENDIAN
static inline VOID WriteBackToDescriptor(
@@ -3303,7 +3285,6 @@ static inline VOID RTMPWIEndianChange(
Call this function when read or update descriptor
========================================================================
*/
-#ifdef RT2860
static inline VOID RTMPDescriptorEndianChange(
IN PUCHAR pData,
IN ULONG DescriptorType)
@@ -3313,7 +3294,6 @@ static inline VOID RTMPDescriptorEndianC
*((UINT32 *)(pData +12)) = SWAP32(*((UINT32 *)(pData + 12))); // Byte 12~15
*((UINT32 *)(pData + 4)) = SWAP32(*((UINT32 *)(pData + 4))); // Byte 4~7, this must be swapped last
}
-#endif // RT2860 //
/*
========================================================================
@@ -4319,11 +4299,9 @@ BOOLEAN AsicSendCommandToMcu(
IN UCHAR Arg0,
IN UCHAR Arg1);
-#ifdef RT2860
BOOLEAN AsicCheckCommanOk(
IN PRTMP_ADAPTER pAd,
IN UCHAR Command);
-#endif // RT2860 //
VOID MacAddrRandomBssid(
IN PRTMP_ADAPTER pAd,
@@ -6993,7 +6971,6 @@ void kill_thread_task(PRTMP_ADAPTER pAd)
void tbtt_tasklet(unsigned long data);
-#ifdef RT2860
//
// Function Prototype in cmm_data_2860.c
//
@@ -7108,7 +7085,6 @@ VOID RT28xxPciMlmeRadioOn(
VOID RT28xxPciMlmeRadioOFF(
IN PRTMP_ADAPTER pAd);
-#endif // RT2860 //
VOID AsicTurnOffRFClk(
IN PRTMP_ADAPTER pAd,
--- a/drivers/staging/rt2860/sta/connect.c
+++ b/drivers/staging/rt2860/sta/connect.c
@@ -1275,7 +1275,6 @@ VOID LinkUp(
//rt2860b. Don't know why need this
SwitchBetweenWepAndCkip(pAd);
-#ifdef RT2860
// Before power save before link up function, We will force use 1R.
// So after link up, check Rx antenna # again.
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
@@ -1293,7 +1292,6 @@ VOID LinkUp(
}
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
pAd->StaCfg.BBPR3 = Value;
-#endif // RT2860 //
if (BssType == BSS_ADHOC)
{
@@ -1341,9 +1339,7 @@ VOID LinkUp(
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
Value &= (~0x20);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
-#ifdef RT2860
pAd->StaCfg.BBPR3 = Value;
-#endif // RT2860 //
RTMP_IO_READ32(pAd, TX_BAND_CFG, &Data);
Data &= 0xfffffffe;
@@ -1378,9 +1374,7 @@ VOID LinkUp(
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
Value |= (0x20);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
-#ifdef RT2860
pAd->StaCfg.BBPR3 = Value;
-#endif // RT2860 //
if (pAd->MACVersion == 0x28600100)
{
@@ -1411,9 +1405,7 @@ VOID LinkUp(
RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
Value &= (~0x20);
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
-#ifdef RT2860
pAd->StaCfg.BBPR3 = Value;
-#endif // RT2860 //
if (pAd->MACVersion == 0x28600100)
{
@@ -2001,7 +1993,6 @@ VOID LinkDown(
DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK DOWN !!!\n"));
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_AGGREGATION_INUSED);
-#ifdef RT2860
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
{
BOOLEAN Cancelled;
@@ -2018,7 +2009,6 @@ VOID LinkDown(
}
pAd->bPCIclkOff = FALSE;
-#endif // RT2860 //
if (ADHOC_ON(pAd)) // Adhoc mode link down
{
DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK DOWN 1!!!\n"));
@@ -2533,7 +2523,6 @@ VOID AuthParmFill(
==========================================================================
*/
-#ifdef RT2860
VOID ComposePsPoll(
IN PRTMP_ADAPTER pAd)
{
@@ -2557,7 +2546,6 @@ VOID ComposeNullFrame(
COPY_MAC_ADDR(pAd->NullFrame.Addr2, pAd->CurrentAddress);
COPY_MAC_ADDR(pAd->NullFrame.Addr3, pAd->CommonCfg.Bssid);
}
-#endif // RT2860 //
--- a/drivers/staging/rt2860/sta/dls.c
+++ b/drivers/staging/rt2860/sta/dls.c
@@ -1419,7 +1419,6 @@ BOOLEAN RTMPRcvFrameDLSCheck(
//AsicAddKeyEntry(pAd, (USHORT)(i + 2), BSS0, 0, &PairwiseKey, TRUE, TRUE); // reserve 0 for multicast, 1 for unicast
//AsicUpdateRxWCIDTable(pAd, (USHORT)(i + 2), pAddr);
// Add Pair-wise key to Asic
-#ifdef RT2860
AsicAddPairwiseKeyEntry(pAd,
pAd->StaCfg.DLSEntry[i].MacAddr,
(UCHAR)pAd->StaCfg.DLSEntry[i].MacTabMatchWCID,
@@ -1431,7 +1430,6 @@ BOOLEAN RTMPRcvFrameDLSCheck(
PairwiseKey.CipherAlg,
pEntry);
-#endif // RT2860 //
NdisMoveMemory(&pEntry->PairwiseKey, &PairwiseKey, sizeof(CIPHER_KEY));
DBGPRINT(RT_DEBUG_TRACE,("DLS - Receive STAKey Message-1 (Peer STA MAC Address STAKey) \n"));
@@ -1477,7 +1475,6 @@ BOOLEAN RTMPRcvFrameDLSCheck(
//AsicAddKeyEntry(pAd, (USHORT)(i + 2), BSS0, 0, &PairwiseKey, TRUE, TRUE); // reserve 0 for multicast, 1 for unicast
//AsicUpdateRxWCIDTable(pAd, (USHORT)(i + 2), pAddr);
// Add Pair-wise key to Asic
-#ifdef RT2860
AsicAddPairwiseKeyEntry(pAd,
pAd->StaCfg.DLSEntry[i].MacAddr,
(UCHAR)pAd->StaCfg.DLSEntry[i].MacTabMatchWCID,
@@ -1488,7 +1485,6 @@ BOOLEAN RTMPRcvFrameDLSCheck(
0,
PairwiseKey.CipherAlg,
pEntry);
-#endif // RT2860 //
NdisMoveMemory(&pEntry->PairwiseKey, &PairwiseKey, sizeof(CIPHER_KEY));
DBGPRINT(RT_DEBUG_TRACE,("DLS - Receive STAKey Message-1 (Initiator STA MAC Address STAKey)\n"));
--- a/drivers/staging/rt2860/sta/rtmp_data.c
+++ b/drivers/staging/rt2860/sta/rtmp_data.c
@@ -75,7 +75,6 @@ VOID STARxEAPOLFrameIndicate(
if (pAd->StaCfg.DesireSharedKey[idx].KeyLen > 0)
{
-#ifdef RT2860
MAC_TABLE_ENTRY *pEntry = &pAd->MacTab.Content[BSSID_WCID];
// Set key material and cipherAlg to Asic
@@ -89,7 +88,6 @@ VOID STARxEAPOLFrameIndicate(
pAd->IndicateMediaState = NdisMediaStateConnected;
pAd->ExtraInfo = GENERAL_LINK_UP;
-#endif // RT2860 //
// For Preventing ShardKey Table is cleared by remove key procedure.
pAd->SharedKey[BSS0][idx].CipherAlg = CipherAlg;
pAd->SharedKey[BSS0][idx].KeyLen = pAd->StaCfg.DesireSharedKey[idx].KeyLen;
@@ -693,14 +691,12 @@ BOOLEAN STARxDoneInterruptHandle(
break;
}
-#ifdef RT2860
if (RxProcessed++ > MAX_RX_PROCESS_CNT)
{
// need to reschedule rx handle
bReschedule = TRUE;
break;
}
-#endif // RT2860 //
RxProcessed ++; // test
@@ -1227,7 +1223,6 @@ NDIS_STATUS STASendPacket(
========================================================================
*/
-#ifdef RT2860
NDIS_STATUS RTMPFreeTXDRequest(
IN PRTMP_ADAPTER pAd,
IN UCHAR QueIdx,
@@ -1271,7 +1266,6 @@ NDIS_STATUS RTMPFreeTXDRequest(
return (Status);
}
-#endif // RT2860 //
--- a/drivers/staging/rt2860/sta/sync.c
+++ b/drivers/staging/rt2860/sta/sync.c
@@ -228,7 +228,6 @@ VOID MlmeScanReqAction(
// Increase the scan retry counters.
pAd->StaCfg.ScanCnt++;
-#ifdef RT2860
if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) &&
(IDLE_ON(pAd)) &&
(pAd->StaCfg.bRadio == TRUE) &&
@@ -236,7 +235,6 @@ VOID MlmeScanReqAction(
{
RT28xxPciAsicRadioOn(pAd, GUI_IDLE_POWER_SAVE);
}
-#endif // RT2860 //
// first check the parameter sanity
if (MlmeScanReqSanity(pAd,
@@ -349,7 +347,6 @@ VOID MlmeJoinReqAction(
DBGPRINT(RT_DEBUG_TRACE, ("SYNC - MlmeJoinReqAction(BSS #%ld)\n", pInfo->BssIdx));
-#ifdef RT2860
if ((OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE)) &&
(IDLE_ON(pAd)) &&
(pAd->StaCfg.bRadio == TRUE) &&
@@ -357,7 +354,6 @@ VOID MlmeJoinReqAction(
{
RT28xxPciAsicRadioOn(pAd, GUI_IDLE_POWER_SAVE);
}
-#endif // RT2860 //
// reset all the timers
RTMPCancelTimer(&pAd->MlmeAux.ScanTimer, &TimerCancelled);
@@ -1532,12 +1528,10 @@ VOID PeerBeacon(
// 5. otherwise, put PHY back to sleep to save battery.
if (MessageToMe)
{
-#ifdef RT2860
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
{
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, pAd->StaCfg.BBPR3);
}
-#endif // RT2860 //
if (pAd->CommonCfg.bAPSDCapable && pAd->CommonCfg.APEdcaParm.bAPSDCapable &&
pAd->CommonCfg.bAPSDAC_BE && pAd->CommonCfg.bAPSDAC_BK && pAd->CommonCfg.bAPSDAC_VI && pAd->CommonCfg.bAPSDAC_VO)
{
@@ -1548,12 +1542,10 @@ VOID PeerBeacon(
}
else if (BcastFlag && (DtimCount == 0) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM))
{
-#ifdef RT2860
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
{
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, pAd->StaCfg.BBPR3);
}
-#endif // RT2860 //
}
else if ((pAd->TxSwQueue[QID_AC_BK].Number != 0) ||
(pAd->TxSwQueue[QID_AC_BE].Number != 0) ||
@@ -1567,12 +1559,10 @@ VOID PeerBeacon(
{
// TODO: consider scheduled HCCA. might not be proper to use traditional DTIM-based power-saving scheme
// can we cheat here (i.e. just check MGMT & AC_BE) for better performance?
-#ifdef RT2860
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_ADVANCE_POWER_SAVE_PCIE_DEVICE))
{
RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, pAd->StaCfg.BBPR3);
}
-#endif // RT2860 //
}
else
{
--- a/drivers/staging/rt2860/sta_ioctl.c
+++ b/drivers/staging/rt2860/sta_ioctl.c
@@ -583,9 +583,7 @@ rt_ioctl_giwname(struct net_device *dev,
{
// PRTMP_ADAPTER pAdapter = dev->ml_priv;
-#ifdef RT2860
strncpy(name, "RT2860 Wireless", IFNAMSIZ);
-#endif // RT2860 //
return 0;
}
@@ -5321,7 +5319,6 @@ INT RTMPQueryInformation(
case RT_OID_802_11_PRODUCTID:
DBGPRINT(RT_DEBUG_TRACE, ("Query::RT_OID_802_11_PRODUCTID \n"));
-#ifdef RT2860
{
USHORT device_id;
@@ -5331,7 +5328,6 @@ INT RTMPQueryInformation(
DBGPRINT(RT_DEBUG_TRACE, (" pci_dev = NULL\n"));
sprintf(tmp, "%04x %04x\n", NIC_PCI_VENDOR_ID, device_id);
}
-#endif // RT2860 //
wrq->u.data.length = strlen(tmp);
Status = copy_to_user(wrq->u.data.pointer, tmp, wrq->u.data.length);
break;
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/