[tip:x86/setup] x86: remove additional vestiges of the zImage/bzImage split
From: H. Peter Anvin
Date: Thu Mar 12 2009 - 16:00:31 EST
Commit-ID: f9c5107c2bcad91dd56d23888653d7bfa1a9696e
Gitweb: http://git.kernel.org/tip/f9c5107c2bcad91dd56d23888653d7bfa1a9696e
Author: H. Peter Anvin <hpa@xxxxxxxxx>
AuthorDate: Thu, 12 Mar 2009 12:50:33 -0700
Commit: H. Peter Anvin <hpa@xxxxxxxxx>
CommitDate: Thu, 12 Mar 2009 12:50:33 -0700
x86: remove additional vestiges of the zImage/bzImage split
Impact: cleanup
Remove targets that were used for zImage only, and Makefile
infrastructure that was there to support the zImage/bzImage split.
Reported-by: Paul Bolle <pebolle@xxxxxxxxxx>
LKML-Reference: <1236879901.24144.26.camel@xxxxxxxxxxxxxxxx>
Signed-off-by: H. Peter Anvin <hpa@xxxxxxxxx>
---
arch/x86/Makefile | 27 ++++++++-------------------
arch/x86/boot/Makefile | 29 ++++++++++++++++-------------
2 files changed, 24 insertions(+), 32 deletions(-)
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 1836191..43bd89c 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -153,34 +153,23 @@ endif
boot := arch/x86/boot
-PHONY += zImage bzImage compressed zlilo bzlilo \
- zdisk bzdisk fdimage fdimage144 fdimage288 isoimage install
+BOOT_TARGETS = bzlilo bzdisk fdimage fdimage144 fdimage288 isoimage install
+
+PHONY += bzImage $(BOOT_TARGETS)
# Default kernel to build
all: bzImage
# KBUILD_IMAGE specify target image being built
- KBUILD_IMAGE := $(boot)/bzImage
-zImage zlilo zdisk: KBUILD_IMAGE := $(boot)/zImage
+KBUILD_IMAGE := $(boot)/bzImage
-zImage bzImage: vmlinux
+bzImage: vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(KBUILD_IMAGE)
$(Q)mkdir -p $(objtree)/arch/$(UTS_MACHINE)/boot
$(Q)ln -fsn ../../x86/boot/bzImage $(objtree)/arch/$(UTS_MACHINE)/boot/$@
-compressed: zImage
-
-zlilo bzlilo: vmlinux
- $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zlilo
-
-zdisk bzdisk: vmlinux
- $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) zdisk
-
-fdimage fdimage144 fdimage288 isoimage: vmlinux
- $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) $@
-
-install:
- $(Q)$(MAKE) $(build)=$(boot) BOOTIMAGE=$(KBUILD_IMAGE) install
+$(BOOT_TARGETS): vmlinux
+ $(Q)$(MAKE) $(build)=$(boot) $@
PHONY += vdso_install
vdso_install:
@@ -208,4 +197,4 @@ endef
CLEAN_FILES += arch/x86/boot/fdimage \
arch/x86/boot/image.iso \
- arch/x86/boot/mtools.conf
+ arch/x86/boot/mtools.conf
\ No newline at end of file
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index 57a29fe..2a3db75 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -109,9 +109,11 @@ $(obj)/setup.bin: $(obj)/setup.elf FORCE
$(obj)/compressed/vmlinux: FORCE
$(Q)$(MAKE) $(build)=$(obj)/compressed $@
-# Set this if you want to pass append arguments to the zdisk/fdimage/isoimage kernel
+# Set this if you want to pass append arguments to the
+# bzdisk/fdimage/isoimage kernel
FDARGS =
-# Set this if you want an initrd included with the zdisk/fdimage/isoimage kernel
+# Set this if you want an initrd included with the
+# bzdisk/fdimage/isoimage kernel
FDINITRD =
image_cmdline = default linux $(FDARGS) $(if $(FDINITRD),initrd=initrd.img,)
@@ -120,7 +122,7 @@ $(obj)/mtools.conf: $(src)/mtools.conf.in
sed -e 's|@OBJ@|$(obj)|g' < $< > $@
# This requires write access to /dev/fd0
-zdisk: $(BOOTIMAGE) $(obj)/mtools.conf
+bzdisk: $(obj)/bzImage $(obj)/mtools.conf
MTOOLSRC=$(obj)/mtools.conf mformat a: ; sync
syslinux /dev/fd0 ; sync
echo '$(image_cmdline)' | \
@@ -128,10 +130,10 @@ zdisk: $(BOOTIMAGE) $(obj)/mtools.conf
if [ -f '$(FDINITRD)' ] ; then \
MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' a:initrd.img ; \
fi
- MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) a:linux ; sync
+ MTOOLSRC=$(obj)/mtools.conf mcopy $(obj)/bzImage a:linux ; sync
# These require being root or having syslinux 2.02 or higher installed
-fdimage fdimage144: $(BOOTIMAGE) $(obj)/mtools.conf
+fdimage fdimage144: $(obj)/bzImage $(obj)/mtools.conf
dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=1440
MTOOLSRC=$(obj)/mtools.conf mformat v: ; sync
syslinux $(obj)/fdimage ; sync
@@ -140,9 +142,9 @@ fdimage fdimage144: $(BOOTIMAGE) $(obj)/mtools.conf
if [ -f '$(FDINITRD)' ] ; then \
MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' v:initrd.img ; \
fi
- MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) v:linux ; sync
+ MTOOLSRC=$(obj)/mtools.conf mcopy $(obj)/bzImage v:linux ; sync
-fdimage288: $(BOOTIMAGE) $(obj)/mtools.conf
+fdimage288: $(obj)/bzImage $(obj)/mtools.conf
dd if=/dev/zero of=$(obj)/fdimage bs=1024 count=2880
MTOOLSRC=$(obj)/mtools.conf mformat w: ; sync
syslinux $(obj)/fdimage ; sync
@@ -151,9 +153,9 @@ fdimage288: $(BOOTIMAGE) $(obj)/mtools.conf
if [ -f '$(FDINITRD)' ] ; then \
MTOOLSRC=$(obj)/mtools.conf mcopy '$(FDINITRD)' w:initrd.img ; \
fi
- MTOOLSRC=$(obj)/mtools.conf mcopy $(BOOTIMAGE) w:linux ; sync
+ MTOOLSRC=$(obj)/mtools.conf mcopy $(obj)/bzImage w:linux ; sync
-isoimage: $(BOOTIMAGE)
+isoimage: $(obj)/bzImage
-rm -rf $(obj)/isoimage
mkdir $(obj)/isoimage
for i in lib lib64 share end ; do \
@@ -163,7 +165,7 @@ isoimage: $(BOOTIMAGE)
fi ; \
if [ $$i = end ] ; then exit 1 ; fi ; \
done
- cp $(BOOTIMAGE) $(obj)/isoimage/linux
+ cp $(obj)/bzImage $(obj)/isoimage/linux
echo '$(image_cmdline)' > $(obj)/isoimage/isolinux.cfg
if [ -f '$(FDINITRD)' ] ; then \
cp '$(FDINITRD)' $(obj)/isoimage/initrd.img ; \
@@ -174,12 +176,13 @@ isoimage: $(BOOTIMAGE)
isohybrid $(obj)/image.iso 2>/dev/null || true
rm -rf $(obj)/isoimage
-zlilo: $(BOOTIMAGE)
+bzlilo: $(obj)/bzImage
if [ -f $(INSTALL_PATH)/vmlinuz ]; then mv $(INSTALL_PATH)/vmlinuz $(INSTALL_PATH)/vmlinuz.old; fi
if [ -f $(INSTALL_PATH)/System.map ]; then mv $(INSTALL_PATH)/System.map $(INSTALL_PATH)/System.old; fi
- cat $(BOOTIMAGE) > $(INSTALL_PATH)/vmlinuz
+ cat $(obj)/bzImage > $(INSTALL_PATH)/vmlinuz
cp System.map $(INSTALL_PATH)/
if [ -x /sbin/lilo ]; then /sbin/lilo; else /etc/lilo/install; fi
install:
- sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)"
+ sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(obj)/bzImage \
+ System.map "$(INSTALL_PATH)"
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/