[PATCH] Fix Bug 10504 - losetup possible circular locking

[Nikanth Karthikesan]

With CONFIG_PROVE_LOCKING enabled

$ losetup /dev/loop0 file
$ losetup -o 32256 /dev/loop1 /dev/loop0 

$ losetup -d /dev/loop1
$ losetup -d /dev/loop0

triggers a [ INFO: possible circular locking dependency detected ]

I think this warning is a false positive. 

Open/close on a loop device acquires bd_mutex of the device before
acquiring lo_ctl_mutex of the same device. For ioctl(LOOP_CLR_FD) after
acquiring lo_ctl_mutex, fput on the backing_file might acquire the bd_mutex of
a device, if backing file is a device and this is the last reference to the
file being dropped . But it is guaranteed that it is impossible to have a
circular list of backing devices.(say loop2->loop1->loop0->loop2 is not
possible), which guarantees that this can never deadlock.

So this warning should be suppressed. It is very difficult to annotate lockdep
not to warn here in the correct way. A simple way to silence lockdep could be
to mark the lo_ctl_mutex in ioctl to be a sub class, but this might mask some
other real bugs.

--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -1164,7 +1164,7 @@ static int lo_ioctl(struct block_device *bdev, fmode_t mode,
 	struct loop_device *lo = bdev->bd_disk->private_data;
 	int err;
 
-	mutex_lock(&lo->lo_ctl_mutex);
+	mutex_lock_nested(&lo->lo_ctl_mutex, 1);
 	switch (cmd) {
 	case LOOP_SET_FD:
 		err = loop_set_fd(lo, mode, bdev, arg);

Or actually marking the bd_mutex after lo_ctl_mutex as a sub class could be 
a better solution.

Luckily it is easy to avoid calling fput on backing file with lo_ctl_mutex
held, so no lockdep annotation is required. 

If you do not like the special handling of the lo_ctl_mutex just for the
LOOP_CLR_FD ioctl in lo_ioctl(), the mutex handling could be moved inside
each of the individual ioctl handlers and I could send you another patch.

Thanks
Nikanth Karthikesan

Signed-off-by: Nikanth Karthikesan <knikanth@xxxxxxx>

---

Fix Bug 10504 - losetup possible circular locking

Avoid triggering a circular dependency warning by calling fput on the backing 
file with lo_ctl_mutex held. If the backing file is a device, fput might try 
to acquire bd_mutex of a that device which triggers a circular dependency 
warning.

diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index edbaac6..5588f67 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -942,11 +942,18 @@ static int loop_clr_fd(struct loop_device *lo, struct block_device *bdev)
 		bd_set_size(bdev, 0);
 	mapping_set_gfp_mask(filp->f_mapping, gfp);
 	lo->lo_state = Lo_unbound;
-	fput(filp);
 	/* This is safe: open() is still holding a reference. */
 	module_put(THIS_MODULE);
 	if (max_part > 0)
 		ioctl_by_bdev(bdev, BLKRRPART, 0);
+	mutex_unlock(&lo->lo_ctl_mutex);
+	/*
+	 * Need not hold lo_ctl_mutex to fput backing file.
+	 * Calling fput holding lo_ctl_mutex triggers a circular
+	 * lock dependency possibility warning as fput can take
+	 * bd_mutex which is usually taken before lo_ctl_mutex.
+	 */
+	fput(filp);
 	return 0;
 }
 
@@ -1173,7 +1180,10 @@ static int lo_ioctl(struct block_device *bdev, fmode_t mode,
 		err = loop_change_fd(lo, bdev, arg);
 		break;
 	case LOOP_CLR_FD:
+		/* loop_clr_fd would have unlocked lo_ctl_mutex on success */
 		err = loop_clr_fd(lo, bdev);
+		if (!err)
+			goto out_unlocked;
 		break;
 	case LOOP_SET_STATUS:
 		err = loop_set_status_old(lo, (struct loop_info __user *) arg);
@@ -1191,6 +1201,8 @@ static int lo_ioctl(struct block_device *bdev, fmode_t mode,
 		err = lo->ioctl ? lo->ioctl(lo, cmd, arg) : -EINVAL;
 	}
 	mutex_unlock(&lo->lo_ctl_mutex);
+
+out_unlocked:
 	return err;
 }
 


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/