Re: dmesg of yesterday released Mac Mini
From: Justin Mattock
Date: Thu Mar 12 2009 - 03:42:15 EST
On Thu, Mar 12, 2009 at 12:21 AM, Thomas Glanzmann <thomas@xxxxxxxxxxxx> wrote:
> Hello,
> here is the output of (dmesg; lspci; lspci -n)
>
> [ 0.000000] Initializing cgroup subsys cpuset
> [ 0.000000] Initializing cgroup subsys cpu
> [ 0.000000] Linux version 2.6.26-1-686 (Debian 2.6.26-13) (waldi@xxxxxxxxxx) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-24)) #1 SMP Sat Jan 10 18:29:31 UTC 2009
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> [ 0.000000] BIOS-e820: 0000000000100000 - 0000000080000000 (usable)
> [ 0.000000] BIOS-e820: 0000000080000000 - 0000000090000000 (reserved)
> [ 0.000000] BIOS-e820: 0000000090000000 - 00000000be4b7000 (usable)
> [ 0.000000] BIOS-e820: 00000000be4b7000 - 00000000be6b8000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 00000000be6b8000 - 00000000be86b000 (ACPI data)
> [ 0.000000] BIOS-e820: 00000000be86b000 - 00000000be86d000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 00000000be86d000 - 00000000be86e000 (ACPI data)
> [ 0.000000] BIOS-e820: 00000000be86e000 - 00000000be870000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 00000000be870000 - 00000000bfec6000 (ACPI data)
> [ 0.000000] BIOS-e820: 00000000bfec6000 - 00000000bfec8000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 00000000bfec8000 - 00000000bfec9000 (ACPI data)
> [ 0.000000] BIOS-e820: 00000000bfec9000 - 00000000bfecb000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 00000000bfecb000 - 00000000bfecd000 (ACPI data)
> [ 0.000000] BIOS-e820: 00000000bfecd000 - 00000000bfedf000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 00000000bfedf000 - 00000000bfef9000 (ACPI data)
> [ 0.000000] BIOS-e820: 00000000bfef9000 - 00000000bfeff000 (reserved)
> [ 0.000000] BIOS-e820: 00000000bfeff000 - 00000000bff00000 (ACPI data)
> [ 0.000000] BIOS-e820: 00000000d3400000 - 00000000d3401000 (reserved)
> [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> [ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
> [ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
> [ 0.000000] Warning only 4GB will be used.
> [ 0.000000] Use a HIGHMEM64G enabled kernel.
> [ 0.000000] 3200MB HIGHMEM available.
> [ 0.000000] 896MB LOWMEM available.
> [ 0.000000] Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
> [ 0.000000] Zone PFN ranges:
> [ 0.000000] DMA 0 -> 4096
> [ 0.000000] Normal 4096 -> 229376
> [ 0.000000] HighMem 229376 -> 1048576
> [ 0.000000] Movable zone start PFN for each node
> [ 0.000000] early_node_map[1] active PFN ranges
> [ 0.000000] 0: 0 -> 1048576
> [ 0.000000] On node 0 totalpages: 1048576
> [ 0.000000] DMA zone: 32 pages used for memmap
> [ 0.000000] DMA zone: 0 pages reserved
> [ 0.000000] DMA zone: 4064 pages, LIFO batch:0
> [ 0.000000] Normal zone: 1760 pages used for memmap
> [ 0.000000] Normal zone: 223520 pages, LIFO batch:31
> [ 0.000000] HighMem zone: 6400 pages used for memmap
> [ 0.000000] HighMem zone: 812800 pages, LIFO batch:31
> [ 0.000000] Movable zone: 0 pages used for memmap
> [ 0.000000] DMI 2.4 present.
> [ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE )
> [ 0.000000] ACPI: XSDT BFEEE1C0, 0074 (r1 APPLE Apple00 81 1000013)
> [ 0.000000] ACPI: FACP BFEEC000, 00F4 (r3 APPLE Apple00 81 Loki 5F)
> [ 0.000000] ACPI: DSDT BFEE0000, 50B8 (r1 APPLE Macmini 30001 INTL 20061109)
> [ 0.000000] ACPI: FACS BFECD000, 0040
> [ 0.000000] ACPI: HPET BFEEB000, 0038 (r1 APPLE Apple00 1 Loki 5F)
> [ 0.000000] ACPI: APIC BFEEA000, 0068 (r1 APPLE Apple00 1 Loki 5F)
> [ 0.000000] ACPI: MCFG BFEE9000, 003C (r1 APPLE Apple00 1 Loki 5F)
> [ 0.000000] ACPI: ASF! BFEE8000, 00A5 (r32 APPLE Apple00 1 Loki 5F)
> [ 0.000000] ACPI: SBST BFEE7000, 0030 (r1 APPLE Apple00 1 Loki 5F)
> [ 0.000000] ACPI: ECDT BFEE6000, 0053 (r1 APPLE Apple00 1 Loki 5F)
> [ 0.000000] ACPI: SSDT BFEC8000, 04DC (r1 APPLE CpuPm 3000 INTL 20061109)
> [ 0.000000] ACPI: SSDT BFEDF000, 00A5 (r1 SataRe SataPri 1000 INTL 20061109)
> [ 0.000000] ACPI: SSDT BFECC000, 009F (r1 SataRe SataSec 1000 INTL 20061109)
> [ 0.000000] ACPI: DMI detected: Apple
> [ 0.000000] ACPI: PM-Timer IO Port: 0x408
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
> [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
> [ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.000000] Allocating PCI resources starting at d4000000 (gap: d3401000:1cbff000)
> [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
> [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
> [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
> [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
> [ 0.000000] PERCPU: Allocating 37960 bytes of per cpu data
> [ 0.000000] NR_CPUS: 8, nr_cpu_ids: 2
> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040384
> [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.26-1-686 root=/dev/sda3 ro
> [ 0.000000] mapped APIC to ffffb000 (fee00000)
> [ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
> [ 0.000000] Enabling fast FPU save and restore... done.
> [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
> [ 0.000000] Initializing CPU#0
> [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
> [ 0.000000] Extended CMOS year: 2000
> [ 0.000000] Detected 2255.324 MHz processor.
> [ 0.004000] spurious 8259A interrupt: IRQ7.
> [ 0.004000] Console: colour VGA+ 80x25
> [ 0.004000] console [tty0] enabled
> [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> [ 0.004000] Memory: 2811424k/4194304k available (1769k kernel code, 42976k reserved, 752k data, 244k init, 1938140k highmem)
> [ 0.004000] virtual kernel memory layout:
> [ 0.004000] fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB)
> [ 0.004000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> [ 0.004000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
> [ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
> [ 0.004000] .init : 0xc037f000 - 0xc03bc000 ( 244 kB)
> [ 0.004000] .data : 0xc02ba4ab - 0xc0376620 ( 752 kB)
> [ 0.004000] .text : 0xc0100000 - 0xc02ba4ab (1769 kB)
> [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
> [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
> [ 0.004000] hpet clockevent registered
> [ 0.083985] Calibrating delay using timer specific routine.. 4516.14 BogoMIPS (lpj=9032298)
> [ 0.084005] Security Framework initialized
> [ 0.084005] SELinux: Disabled at boot.
> [ 0.084005] Capability LSM initialized
> [ 0.084005] Mount-cache hash table entries: 512
> [ 0.084005] Initializing cgroup subsys ns
> [ 0.084005] Initializing cgroup subsys cpuacct
> [ 0.084005] Initializing cgroup subsys devices
> [ 0.084005] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.084005] CPU: L2 cache: 3072K
> [ 0.084005] CPU: Physical Processor ID: 0
> [ 0.084005] CPU: Processor Core ID: 0
> [ 0.084005] Intel machine check architecture supported.
> [ 0.084005] Intel machine check reporting enabled on CPU#0.
> [ 0.084005] using mwait in idle threads.
> [ 0.084005] Checking 'hlt' instruction... OK.
> [ 0.100006] ACPI: Core revision 20080321
> [ 0.108214] ENABLING IO-APIC IRQs
> [ 0.108481] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.148271] CPU0: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 0a
> [ 0.152009] Booting processor 1/1 ip 6000
> [ 0.160010] Initializing CPU#1
> [ 0.160010] Calibrating delay using timer specific routine.. 4510.62 BogoMIPS (lpj=9021257)
> [ 0.160010] CPU: L1 I cache: 32K, L1 D cache: 32K
> [ 0.160010] CPU: L2 cache: 3072K
> [ 0.160010] CPU: Physical Processor ID: 0
> [ 0.160010] CPU: Processor Core ID: 1
> [ 0.160010] Intel machine check architecture supported.
> [ 0.160010] Intel machine check reporting enabled on CPU#1.
> [ 0.240015] CPU1: Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz stepping 0a
> [ 0.240015] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
> [ 0.244015] Brought up 2 CPUs
> [ 0.244015] Total of 2 processors activated (9026.77 BogoMIPS).
> [ 0.244015] CPU0 attaching sched-domain:
> [ 0.244015] domain 0: span 0-1
> [ 0.244015] groups: 0 1
> [ 0.244015] CPU1 attaching sched-domain:
> [ 0.244015] domain 0: span 0-1
> [ 0.244015] groups: 1 0
> [ 0.244015] net_namespace: 660 bytes
> [ 0.244015] Booting paravirtualized kernel on bare hardware
> [ 0.244015] NET: Registered protocol family 16
> [ 0.244015] ACPI: bus type pci registered
> [ 0.244015] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
> [ 0.244015] PCI: Not using MMCONFIG.
> [ 0.245738] PCI: Using configuration type 1 for base access
> [ 0.245812] Setting up standard PCI resources
> [ 0.253200] ACPI: EC: EC description table is found, configuring boot EC
> [ 0.253460] ACPI: EC: non-query interrupt received, switching to interrupt mode
> [ 0.270548] ACPI: BIOS _OSI(Linux) query ignored via DMI
> [ 0.271323] ACPI: Interpreter enabled
> [ 0.271384] ACPI: (supports S0 S3 S4 S5)
> [ 0.271636] ACPI: Using IOAPIC for interrupt routing
> [ 0.271774] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 255
> [ 0.279389] PCI: BIOS Bug: MCFG area at f0000000 is not reserved in ACPI motherboard resources
> [ 0.279465] PCI: Not using MMCONFIG.
> [ 0.292018] ACPI: EC: GPE = 0x3f, I/O: command/status = 0x66, data = 0x62
> [ 0.292018] ACPI: EC: driver started in interrupt mode
> [ 0.292018] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [ 0.296018] PCI: Transparent bridge - 0000:00:09.0
> [ 0.296018] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 0.296018] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
> [ 0.373485] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled.
> [ 0.373485] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 11 14 15) *0, disabled.
> [ 0.373485] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled.
> [ 0.373485] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
> [ 0.373485] ACPI: PCI Interrupt Link [Z003] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
> [ 0.374421] ACPI: PCI Interrupt Link [Z004] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
> [ 0.377485] ACPI: PCI Interrupt Link [Z005] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
> [ 0.378418] ACPI: PCI Interrupt Link [Z006] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
> [ 0.379348] ACPI: PCI Interrupt Link [Z007] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
> [ 0.380283] ACPI: PCI Interrupt Link [Z008] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
> [ 0.381213] ACPI: PCI Interrupt Link [Z009] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
> [ 0.382142] ACPI: PCI Interrupt Link [Z00A] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
> [ 0.383071] ACPI: PCI Interrupt Link [Z00B] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
> [ 0.385919] ACPI: PCI Interrupt Link [Z00C] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
> [ 0.386849] ACPI: PCI Interrupt Link [Z00D] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
> [ 0.387781] ACPI: PCI Interrupt Link [Z00E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
> [ 0.388711] ACPI: PCI Interrupt Link [Z00F] (IRQs 16 17 18 19 20 21 22 23) *10
> [ 0.389594] ACPI: PCI Interrupt Link [Z00G] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
> [ 0.390525] ACPI: PCI Interrupt Link [Z00H] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
> [ 0.391455] ACPI: PCI Interrupt Link [Z00I] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
> [ 0.392389] ACPI: PCI Interrupt Link [Z00J] (IRQs 16 17 18 19 20 21 22 23) *7
> [ 0.393267] ACPI: PCI Interrupt Link [Z00K] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
> [ 0.394197] ACPI: PCI Interrupt Link [Z00L] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
> [ 0.395129] ACPI: PCI Interrupt Link [Z00M] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
> [ 0.396064] ACPI: PCI Interrupt Link [Z00N] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
> [ 0.396994] ACPI: PCI Interrupt Link [Z00O] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
> [ 0.397922] ACPI: PCI Interrupt Link [Z00P] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
> [ 0.398852] ACPI: PCI Interrupt Link [Z00Q] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
> [ 0.399785] ACPI: PCI Interrupt Link [Z00R] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
> [ 0.400716] ACPI: PCI Interrupt Link [Z00S] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
> [ 0.401644] ACPI: PCI Interrupt Link [Z00T] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
> [ 0.402572] ACPI: PCI Interrupt Link [Z00U] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
> [ 0.403500] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *15
> [ 0.404387] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11
> [ 0.405271] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *10
> [ 0.406155] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *14
> [ 0.407040] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *15
> [ 0.407929] ACPI: PCI Interrupt Link [LGPU] (IRQs 16 17 18 19 20 21 22 23) *11
> [ 0.408813] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
> [ 0.409746] ACPI: PCI Interrupt Link [LSI0] (IRQs 16 17 18 19 20 21 22 23) *11
> [ 0.410633] ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
> [ 0.411565] ACPI: PCI Interrupt Link [Z000] (IRQs 16 17 18 19 20 21 22 23) *7
> [ 0.412447] ACPI: PCI Interrupt Link [Z001] (IRQs 16 17 18 19 20 21 22 23) *5
> [ 0.413324] ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *14
> [ 0.415619] Linux Plug and Play Support v0.97 (c) Adam Belay
> [ 0.415619] pnp: PnP ACPI init
> [ 0.415619] ACPI: bus type pnp registered
> [ 0.419214] pnp: PnP ACPI: found 8 devices
> [ 0.419275] ACPI: ACPI bus type pnp unregistered
> [ 0.419337] PnPBIOS: Disabled by ACPI PNP
> [ 0.420022] PCI: Using ACPI for IRQ routing
> [ 0.420022] PCI: Cannot allocate resource region 0 of device 0000:00:03.5
> [ 0.427828] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
> [ 0.428022] hpet0: 4 64-bit timers, 25000000 Hz
> [ 0.430619] system 00:01: iomem range 0xf0000000-0xf3ffffff could not be reserved
> [ 0.430699] system 00:04: iomem range 0xfed00000-0xfed003ff has been reserved
> [ 0.430767] system 00:06: ioport range 0x400-0x47f has been reserved
> [ 0.430830] system 00:06: ioport range 0x480-0x4ff has been reserved
> [ 0.430894] system 00:06: ioport range 0x500-0x57f has been reserved
> [ 0.430957] system 00:06: ioport range 0x580-0x5ff has been reserved
> [ 0.431020] system 00:06: ioport range 0x800-0x87f has been reserved
> [ 0.431079] system 00:06: ioport range 0x880-0x8ff has been reserved
> [ 0.431143] system 00:06: ioport range 0x2140-0x217f has been reserved
> [ 0.431206] system 00:06: ioport range 0x2100-0x213f has been reserved
> [ 0.431269] system 00:06: ioport range 0x4d0-0x4d1 has been reserved
> [ 0.431332] system 00:06: ioport range 0x295-0x296 has been reserved
> [ 0.461639] PCI: Bridge: 0000:00:09.0
> [ 0.461639] IO window: disabled.
> [ 0.461639] MEM window: 0xd3300000-0xd33fffff
> [ 0.461639] PREFETCH window: disabled.
> [ 0.461639] PCI: Bridge: 0000:00:10.0
> [ 0.461639] IO window: 1000-1fff
> [ 0.461639] MEM window: 0xd2000000-0xd30fffff
> [ 0.461639] PREFETCH window: 0x00000000c0000000-0x00000000d1ffffff
> [ 0.461639] PCI: Bridge: 0000:00:15.0
> [ 0.461639] IO window: disabled.
> [ 0.461639] MEM window: 0xd3200000-0xd32fffff
> [ 0.461639] PREFETCH window: disabled.
> [ 0.461639] PCI: Bridge: 0000:00:16.0
> [ 0.461700] IO window: disabled.
> [ 0.461768] MEM window: 0xd3100000-0xd31fffff
> [ 0.461833] PREFETCH window: disabled.
> [ 0.461910] pci 0000:00:09.0: enabling device (0000 -> 0002)
> [ 0.461975] PCI: Setting latency timer of device 0000:00:09.0 to 64
> [ 0.461988] PCI: Setting latency timer of device 0000:00:10.0 to 64
> [ 0.462478] ACPI: PCI Interrupt Link [Z00F] enabled at IRQ 23
> [ 0.462542] ACPI: PCI Interrupt 0000:00:15.0[A] -> Link [Z00F] -> GSI 23 (level, low) -> IRQ 23
> [ 0.462714] PCI: Setting latency timer of device 0000:00:15.0 to 64
> [ 0.463198] ACPI: PCI Interrupt Link [Z00J] enabled at IRQ 22
> [ 0.463261] ACPI: PCI Interrupt 0000:00:16.0[A] -> Link [Z00J] -> GSI 22 (level, low) -> IRQ 22
> [ 0.465639] PCI: Setting latency timer of device 0000:00:16.0 to 64
> [ 0.465668] NET: Registered protocol family 2
> [ 0.479940] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> [ 0.480233] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> [ 0.480681] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> [ 0.480935] TCP: Hash tables configured (established 131072 bind 65536)
> [ 0.480998] TCP reno registered
> [ 0.483947] NET: Registered protocol family 1
> [ 0.484114] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
> [ 0.511884] Switched to high resolution mode on CPU 0
> [ 0.763822] it is
> [ 1.060918] Freeing initrd memory: 6018k freed
> [ 1.060998] audit: initializing netlink socket (disabled)
> [ 1.060998] type=2000 audit(1236841380.048:1): initialized
> [ 1.060999] highmem bounce pool size: 64 pages
> [ 1.060999] Total HugeTLB memory allocated, 0
> [ 1.060999] VFS: Disk quotas dquot_6.5.1
> [ 1.060999] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> [ 1.060999] msgmni has been set to 1719
> [ 1.060999] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
> [ 1.060999] io scheduler noop registered
> [ 1.060999] io scheduler anticipatory registered
> [ 1.060999] io scheduler deadline registered
> [ 1.061073] io scheduler cfq registered (default)
> [ 1.077599] pci 0000:02:00.0: Boot video device
> [ 1.079998] PCI: Setting latency timer of device 0000:00:15.0 to 64
> [ 1.079998] assign_interrupt_mode Found MSI capability
> [ 1.079998] Allocate Port Service[0000:00:15.0:pcie00]
> [ 1.079998] PCI: Setting latency timer of device 0000:00:16.0 to 64
> [ 1.080062] assign_interrupt_mode Found MSI capability
> [ 1.080239] Allocate Port Service[0000:00:16.0:pcie00]
> [ 1.080999] isapnp: Scanning for PnP cards...
> [ 1.434561] isapnp: No Plug & Play device found
> [ 1.440994] hpet_resources: 0xfed00000 is busy
> [ 1.440994] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> [ 1.440994] brd: module loaded
> [ 1.440994] PNP: No PS/2 controller found. Probing ports directly.
> [ 1.440994] i8042.c: No controller found.
> [ 1.440994] mice: PS/2 mouse device common for all mice
> [ 1.440994] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
> [ 1.440994] rtc0: alarms up to one year, y3k
> [ 1.440994] cpuidle: using governor ladder
> [ 1.440994] cpuidle: using governor menu
> [ 1.440994] No iBFT detected.
> [ 1.441486] TCP cubic registered
> [ 1.441547] NET: Registered protocol family 17
> [ 1.441613] Using IPI No-Shortcut mode
> [ 1.444993] registered taskstats version 1
> [ 1.444993] rtc_cmos 00:07: setting system clock to 2009-03-12 07:03:01 UTC (1236841381)
> [ 1.444993] Freeing unused kernel memory: 244k freed
> [ 1.533501] ACPI: SSDT BFECAC98, 0238 (r1 APPLE Cpu0Ist 3000 INTL 20061109)
> [ 1.533501] ACPI: SSDT BFEC9C18, 02AD (r1 APPLE Cpu0Cst 3001 INTL 20061109)
> [ 1.533501] Monitor-Mwait will be used to enter C-1 state
> [ 1.533501] Monitor-Mwait will be used to enter C-2 state
> [ 1.533501] Monitor-Mwait will be used to enter C-3 state
> [ 1.537501] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
> [ 1.537501] ACPI: ACPI0007:00 is registered as cooling_device0
> [ 1.537501] ACPI: Processor [CPU0] (supports 8 throttling states)
> [ 1.537501] ACPI: SSDT BFECAF18, 00C8 (r1 APPLE Cpu1Ist 3000 INTL 20061109)
> [ 1.537501] ACPI: SSDT BFEC9F18, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20061109)
> [ 1.537501] Marking TSC unstable due to: TSC halts in idle.
> [ 1.537501] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
> [ 1.537501] ACPI: ACPI0007:01 is registered as cooling_device1
> [ 1.537501] ACPI: Processor [CPU1] (supports 8 throttling states)
> [ 1.770566] usbcore: registered new interface driver usbfs
> [ 1.770566] usbcore: registered new interface driver hub
> [ 1.770566] usbcore: registered new device driver usb
> [ 1.771610] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
> [ 1.772141] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 21
> [ 1.772207] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [LUS0] -> GSI 21 (level, low) -> IRQ 21
> [ 1.773236] PCI: Setting latency timer of device 0000:00:04.0 to 64
> [ 1.773239] ohci_hcd 0000:00:04.0: OHCI Host Controller
> [ 1.773420] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 1
> [ 1.773506] ohci_hcd 0000:00:04.0: irq 21, io mem 0xd3488000
> [ 1.822537] Uniform Multi-Platform E-IDE driver
> [ 1.825717] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> [ 1.830818] usb usb1: configuration #1 chosen from 1 choice
> [ 1.830912] hub 1-0:1.0: USB hub found
> [ 1.830978] hub 1-0:1.0: 7 ports detected
> [ 1.934701] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
> [ 1.934768] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 1.934842] usb usb1: Product: OHCI Host Controller
> [ 1.934901] usb usb1: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
> [ 1.934963] usb usb1: SerialNumber: 0000:00:04.0
> [ 1.936747] ACPI: PCI Interrupt Link [Z000] enabled at IRQ 20
> [ 1.936747] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [Z000] -> GSI 20 (level, low) -> IRQ 20
> [ 1.936747] PCI: Setting latency timer of device 0000:00:06.0 to 64
> [ 1.936747] ohci_hcd 0000:00:06.0: OHCI Host Controller
> [ 1.936747] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 2
> [ 1.936747] ohci_hcd 0000:00:06.0: irq 20, io mem 0xd3487000
> [ 1.992745] usb usb2: configuration #1 chosen from 1 choice
> [ 1.992745] hub 2-0:1.0: USB hub found
> [ 1.992745] hub 2-0:1.0: 5 ports detected
> [ 2.093998] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
> [ 2.094063] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 2.094136] usb usb2: Product: OHCI Host Controller
> [ 2.094196] usb usb2: Manufacturer: Linux 2.6.26-1-686 ohci_hcd
> [ 2.094259] usb usb2: SerialNumber: 0000:00:06.0
> [ 2.096745] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 19
> [ 2.096745] ACPI: PCI Interrupt 0000:00:04.1[B] -> Link [LUS2] -> GSI 19 (level, low) -> IRQ 19
> [ 2.096745] PCI: Setting latency timer of device 0000:00:04.1 to 64
> [ 2.096745] ehci_hcd 0000:00:04.1: EHCI Host Controller
> [ 2.096745] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 3
> [ 2.096745] ehci_hcd 0000:00:04.1: debug port 1
> [ 2.096745] PCI: cache line size of 32 is not supported by device 0000:00:04.1
> [ 2.096745] ehci_hcd 0000:00:04.1: irq 19, io mem 0xd3489200
> [ 2.238383] usb 1-3: new low speed USB device using ohci_hcd and address 2
> [ 2.250231] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> [ 2.250367] usb usb3: configuration #1 chosen from 1 choice
> [ 2.250457] hub 3-0:1.0: USB hub found
> [ 2.250520] hub 3-0:1.0: 7 ports detected
> [ 2.306042] hub 1-0:1.0: unable to enumerate USB device on port 3
> [ 2.354007] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
> [ 2.354071] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 2.354144] usb usb3: Product: EHCI Host Controller
> [ 2.354205] usb usb3: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
> [ 2.354264] usb usb3: SerialNumber: 0000:00:04.1
> [ 2.356747] ACPI: PCI Interrupt Link [Z001] enabled at IRQ 18
> [ 2.356747] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [Z001] -> GSI 18 (level, low) -> IRQ 18
> [ 2.356747] PCI: Setting latency timer of device 0000:00:06.1 to 64
> [ 2.356747] ehci_hcd 0000:00:06.1: EHCI Host Controller
> [ 2.356747] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 4
> [ 2.356747] ehci_hcd 0000:00:06.1: debug port 1
> [ 2.356747] PCI: cache line size of 32 is not supported by device 0000:00:06.1
> [ 2.356747] ehci_hcd 0000:00:06.1: irq 18, io mem 0xd3489100
> [ 2.365646] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> [ 2.365787] usb usb4: configuration #1 chosen from 1 choice
> [ 2.365877] hub 4-0:1.0: USB hub found
> [ 2.365941] hub 4-0:1.0: 5 ports detected
> [ 2.470453] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
> [ 2.470518] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 2.470589] usb usb4: Product: EHCI Host Controller
> [ 2.470648] usb usb4: Manufacturer: Linux 2.6.26-1-686 ehci_hcd
> [ 2.470710] usb usb4: SerialNumber: 0000:00:06.1
> [ 2.473460] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
> [ 2.473460] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 17
> [ 2.473460] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LMAC] -> GSI 17 (level, low) -> IRQ 17
> [ 2.473460] PCI: Setting latency timer of device 0000:00:0a.0 to 64
> [ 2.990624] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:23:df:7e:d4:46
> [ 2.990698] forcedeth 0000:00:0a.0: highdma csum pwrctl mgmt timirq gbit lnktim msi desc-v3
> [ 2.993461] ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [Z00J] -> GSI 22 (level, low) -> IRQ 22
> [ 2.993461] PCI: Setting latency timer of device 0000:04:00.0 to 64
> [ 3.045435] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22] MMIO=[d3100000-d31007ff] Max Packet=[4096] IR/IT contexts=[8/8]
> [ 3.057284] No dock devices found.
> [ 3.063051] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [Z00F] -> GSI 23 (level, low) -> IRQ 23
> [ 3.063412] PCI: Setting latency timer of device 0000:03:00.0 to 64
> [ 3.065434] SCSI subsystem initialized
> [ 3.088950] libata version 3.00 loaded.
> [ 3.103443] ssb: WARNING: Invalid SPROM CRC (corrupt SPROM)
> [ 3.121544] ssb: Sonics Silicon Backplane found on PCI device 0000:03:00.0
> [ 3.125615] ahci 0000:00:0b.0: version 3.0
> [ 3.126124] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 16
> [ 3.126124] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LSI0] -> GSI 16 (level, low) -> IRQ 16
> [ 4.131548] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3 impl IDE mode
> [ 4.131624] ahci 0000:00:0b.0: flags: 64bit ncq sntf pm led pmp pio slum part
> [ 4.131698] PCI: Setting latency timer of device 0000:00:0b.0 to 64
> [ 4.135528] scsi0 : ahci
> [ 4.135621] scsi1 : ahci
> [ 4.135698] scsi2 : ahci
> [ 4.135698] scsi3 : ahci
> [ 4.136585] scsi4 : ahci
> [ 4.136585] scsi5 : ahci
> [ 4.136585] ata1: SATA max UDMA/133 abar m8192@0xd3484000 port 0xd3484100 irq 221
> [ 4.136585] ata2: SATA max UDMA/133 abar m8192@0xd3484000 port 0xd3484180 irq 221
> [ 4.136585] ata3: DUMMY
> [ 4.136585] ata4: DUMMY
> [ 4.136585] ata5: DUMMY
> [ 4.136585] ata6: DUMMY
> [ 4.332044] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0023dffffe7ed446]
> [ 4.388185] usb 2-1: new full speed USB device using ohci_hcd and address 2
> [ 4.608044] usb 2-1: configuration #1 chosen from 1 choice
> [ 4.610612] hub 2-1:1.0: USB hub found
> [ 4.615838] hub 2-1:1.0: 3 ports detected
> [ 4.620739] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 4.624720] ata1.00: ATA-8: Hitachi HTS543232L9SA02, FB4AC50F, max UDMA/133
> [ 4.624720] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
> [ 4.624720] ata1.00: configured for UDMA/133
> [ 4.733242] usb 2-1: New USB device found, idVendor=0a5c, idProduct=4500
> [ 4.733305] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 4.733369] usb 2-1: Product: BCM2045B2
> [ 4.733429] usb 2-1: Manufacturer: Broadcom
> [ 5.034280] usb 2-4: new full speed USB device using ohci_hcd and address 3
> [ 5.121273] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
> [ 5.121259] ata2.00: ATAPI: PIONEER DVD-RW DVRTS08, Q81B, max UDMA/33, ATAPI AN
> [ 5.123477] ata2.00: configured for UDMA/33
> [ 5.141156] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54323 FB4A PQ: 0 ANSI: 5
> [ 5.144194] scsi 1:0:0:0: CD-ROM PIONEER DVD-RW DVRTS08 Q81B PQ: 0 ANSI: 5
> [ 5.158966] Driver 'sd' needs updating - please use bus_type methods
> [ 5.158966] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
> [ 5.158966] sd 0:0:0:0: [sda] Write Protect is off
> [ 5.158966] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 5.158966] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 5.158966] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
> [ 5.158966] sd 0:0:0:0: [sda] Write Protect is off
> [ 5.158966] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 5.158966] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 5.158966] sda:<4>Driver 'sr' needs updating - please use bus_type methods
> [ 5.211193] sda1 sda2 sda3 sda4
> [ 5.211193] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 5.211193] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
> [ 5.211193] Uniform CD-ROM driver Revision: 3.20
> [ 5.211193] sr 1:0:0:0: Attached scsi CD-ROM sr0
> [ 5.224555] sd 0:0:0:0: Attached scsi generic sg0 type 0
> [ 5.224555] sr 1:0:0:0: Attached scsi generic sg1 type 5
> [ 5.268674] usb 2-4: configuration #1 chosen from 1 choice
> [ 5.281684] usb 2-4: New USB device found, idVendor=04e6, idProduct=5116
> [ 5.281684] usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=5
> [ 5.281684] usb 2-4: Product: SCR3310 USB Smart Card Reader
> [ 5.281684] usb 2-4: Manufacturer: SCM Microsystems Inc.
> [ 5.281684] usb 2-4: SerialNumber: 21120703393088
> [ 5.584620] usb 1-3: new low speed USB device using ohci_hcd and address 3
> [ 5.794785] usb 1-3: configuration #1 chosen from 1 choice
> [ 5.797505] usb 1-3: New USB device found, idVendor=0566, idProduct=4006
> [ 5.797569] usb 1-3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
> [ 5.797633] usb 1-3: Product: USB Mouse
> [ 6.100353] usb 1-5: new low speed USB device using ohci_hcd and address 4
> [ 6.314314] usb 1-5: configuration #1 chosen from 1 choice
> [ 6.321006] usb 1-5: New USB device found, idVendor=05ac, idProduct=8242
> [ 6.321006] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 6.321006] usb 1-5: Product: IR Receiver
> [ 6.321006] usb 1-5: Manufacturer: Apple Computer, Inc.
> [ 6.623007] usb 1-7: new full speed USB device using ohci_hcd and address 5
> [ 6.835497] usb 1-7: configuration #1 chosen from 1 choice
> [ 6.837972] hub 1-7:1.0: USB hub found
> [ 6.842870] hub 1-7:1.0: 4 ports detected
> [ 6.968751] usb 1-7: New USB device found, idVendor=0430, idProduct=100e
> [ 6.968815] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [ 7.181119] usb 2-1.1: new full speed USB device using ohci_hcd and address 4
> [ 7.303119] usb 2-1.1: configuration #1 chosen from 1 choice
> [ 7.305599] usb 2-1.1: New USB device found, idVendor=05ac, idProduct=8216
> [ 7.305599] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [ 7.305599] usb 2-1.1: Product: Bluetooth USB Host Controller
> [ 7.305599] usb 2-1.1: Manufacturer: Apple, Inc.
> [ 7.305599] usb 2-1.1: SerialNumber: 002436EB7CF7
> [ 7.518353] usb 2-1.2: new full speed USB device using ohci_hcd and address 5
> [ 7.627571] usb 2-1.2: configuration #1 chosen from 1 choice
> [ 7.630061] usb 2-1.2: New USB device found, idVendor=05ac, idProduct=820a
> [ 7.630061] usb 2-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [ 7.845670] usb 2-1.3: new full speed USB device using ohci_hcd and address 6
> [ 7.955920] usb 2-1.3: configuration #1 chosen from 1 choice
> [ 7.957938] usb 2-1.3: New USB device found, idVendor=05ac, idProduct=820b
> [ 7.957938] usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [ 8.180911] usb 1-7.4: new full speed USB device using ohci_hcd and address 6
> [ 8.301216] usb 1-7.4: configuration #1 chosen from 1 choice
> [ 8.304193] usb 1-7.4: New USB device found, idVendor=0430, idProduct=00a2
> [ 8.304258] usb 1-7.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
> [ 8.304331] usb 1-7.4: Product: Sun USB Keyboard
> [ 8.309034] usbcore: registered new interface driver hiddev
> [ 8.315259] input: USB Mouse as /class/input/input0
> [ 8.319046] input,hidraw0: USB HID v1.11 Mouse [USB Mouse] on usb-0000:00:04.0-3
> [ 8.329698] hiddev96hidraw1: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:04.0-5
> [ 8.338620] input: HID 05ac:820a as /class/input/input1
> [ 8.339085] input,hidraw2: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:06.0-1.2
> [ 8.342882] input: HID 05ac:820b as /class/input/input2
> [ 8.342882] input,hidraw3: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:06.0-1.3
> [ 8.347998] input: Sun USB Keyboard as /class/input/input3
> [ 8.348156] input,hidraw4: USB HID v1.10 Keyboard [Sun USB Keyboard] on usb-0000:00:04.0-7.4
> [ 8.348156] usbcore: registered new interface driver usbhid
> [ 8.348156] usbhid: v2.6:USB HID core driver
> [ 8.445003] PM: Starting manual resume from disk
> [ 8.506041] kjournald starting. Commit interval 5 seconds
> [ 8.506041] EXT3-fs: mounted filesystem with ordered data mode.
> [ 10.244500] udevd version 125 started
> [ 10.995314] input: Power Button (FF) as /class/input/input4
> [ 11.050580] ACPI: Power Button (FF) [PWRF]
> [ 11.050700] input: Power Button (CM) as /class/input/input5
> [ 11.090137] ACPI: Power Button (CM) [PWRB]
> [ 11.090264] input: Sleep Button (CM) as /class/input/input6
> [ 11.154178] ACPI: Sleep Button (CM) [SLPB]
> [ 11.386649] Bluetooth: Core ver 2.11
> [ 11.401169] NET: Registered protocol family 31
> [ 11.401169] Bluetooth: HCI device and connection manager initialized
> [ 11.401169] Bluetooth: HCI socket layer initialized
> [ 11.440143] Bluetooth: HCI USB driver ver 2.9
> [ 11.442413] usbcore: registered new interface driver hci_usb
> [ 11.448571] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> [ 11.460065] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> [ 11.579307] input: PC Speaker as /class/input/input7
> [ 11.610642] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
> [ 11.610708] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LAZA] -> GSI 23 (level, low) -> IRQ 23
> [ 11.610895] PCI: Setting latency timer of device 0000:00:08.0 to 64
> [ 11.646898] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
> [ 11.660741] Error: Driver 'pcspkr' is already registered, aborting...
> [ 12.685669] Adding 2654852k swap on /dev/sda4. Priority:-1 extents:1 across:2654852k
> [ 13.299232] EXT3 FS on sda3, internal journal
> [ 13.567540] loop: module loaded
> [ 30.591819] Clocksource tsc unstable (delta = -97407605 ns)
> [ 59.628638] NET: Registered protocol family 10
> [ 59.629100] lo: Disabled Privacy Extensions
> 00:00.0 Host bridge: nVidia Corporation Device 0a82 (rev b1)
> 00:00.1 RAM memory: nVidia Corporation Device 0a88 (rev b1)
> 00:03.0 ISA bridge: nVidia Corporation Device 0aae (rev b2)
> 00:03.1 RAM memory: nVidia Corporation Device 0aa4 (rev b1)
> 00:03.2 SMBus: nVidia Corporation Device 0aa2 (rev b1)
> 00:03.3 RAM memory: nVidia Corporation Device 0a89 (rev b1)
> 00:03.4 RAM memory: nVidia Corporation Device 0a98 (rev b1)
> 00:03.5 Co-processor: nVidia Corporation Device 0aa3 (rev b1)
> 00:04.0 USB Controller: nVidia Corporation Device 0aa5 (rev b1)
> 00:04.1 USB Controller: nVidia Corporation Device 0aa6 (rev b1)
> 00:06.0 USB Controller: nVidia Corporation Device 0aa7 (rev b1)
> 00:06.1 USB Controller: nVidia Corporation Device 0aa9 (rev b1)
> 00:08.0 Audio device: nVidia Corporation Device 0ac0 (rev b1)
> 00:09.0 PCI bridge: nVidia Corporation Device 0aab (rev b1)
> 00:0a.0 Ethernet controller: nVidia Corporation MCP79 Ethernet (rev b1)
> 00:0b.0 IDE interface: nVidia Corporation Device 0ab5 (rev b1)
> 00:10.0 PCI bridge: nVidia Corporation Device 0aa0 (rev b1)
> 00:15.0 PCI bridge: nVidia Corporation Device 0ac6 (rev b1)
> 00:16.0 PCI bridge: nVidia Corporation Device 0ac7 (rev b1)
> 02:00.0 VGA compatible controller: nVidia Corporation Device 0861 (rev b1)
> 03:00.0 Network controller: Broadcom Corporation BCM4328 802.11a/b/g/n (rev 05)
> 04:00.0 FireWire (IEEE 1394): Agere Systems Device 5901 (rev 07)
> 00:00.0 0600: 10de:0a82 (rev b1)
> 00:00.1 0500: 10de:0a88 (rev b1)
> 00:03.0 0601: 10de:0aae (rev b2)
> 00:03.1 0500: 10de:0aa4 (rev b1)
> 00:03.2 0c05: 10de:0aa2 (rev b1)
> 00:03.3 0500: 10de:0a89 (rev b1)
> 00:03.4 0500: 10de:0a98 (rev b1)
> 00:03.5 0b40: 10de:0aa3 (rev b1)
> 00:04.0 0c03: 10de:0aa5 (rev b1)
> 00:04.1 0c03: 10de:0aa6 (rev b1)
> 00:06.0 0c03: 10de:0aa7 (rev b1)
> 00:06.1 0c03: 10de:0aa9 (rev b1)
> 00:08.0 0403: 10de:0ac0 (rev b1)
> 00:09.0 0604: 10de:0aab (rev b1)
> 00:0a.0 0200: 10de:0ab0 (rev b1)
> 00:0b.0 0101: 10de:0ab5 (rev b1)
> 00:10.0 0604: 10de:0aa0 (rev b1)
> 00:15.0 0604: 10de:0ac6 (rev b1)
> 00:16.0 0604: 10de:0ac7 (rev b1)
> 02:00.0 0300: 10de:0861 (rev b1)
> 03:00.0 0280: 14e4:4328 (rev 05)
> 04:00.0 0c00: 11c1:5901 (rev 07)
>
> Debian Lenny installed on this one out of the box, but you have to keep
> the following in mind to install:
>
> - Don't delete the EFI partition (obvious)
> - If you use the Lenny installer, the EFI and MSDOS Partition
> Table are out of sync (Lenny seems only to update the EFI).
> However that doesnn't allow you to boot from it using the
> legacy efi bios. However if you install refit (google for it)
> and enable it, you can sync the partitions using the
> partitioner in the refit menu using boot time. Simply say
> ,,yes'' after calling it.
> - To avoid the above hassle, use the MAC OS X (if you want to
> keep it around for firmware updates) partitioner during
> installation to create the partitions for Linux and just use
> the partitions in the debian isntaller (without
> repartitioning). Network card works, graphic card works
> (however I look if the rotation for 1920x1200 works as well,
> will report back). The sound card doesn't seem to recognize.
> Compared to the last time I installed Linux on the mac mini
> this is a walk in the park.
>
> Thomas
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
Looks good,
a bit concerned about
the efi stuff.(grub2 here works
like a charm for the macbook pro);
that is using dd to clear the mbr,
and used fdisk to partition(ext3), and
then create the mbr.
As for the wireless(say it isn't so),
I take it I have to load another
proprietary thing(module).
With the macbook pro(ATI gpu) being proprietary
free is so nice.
regards;
--
Justin P. Mattock
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/