Re: Very old IDE hard drive (240 MB) detected as 1.1 TB

[Mark Lord]

Sergei Shtylyov wrote:
> Hello.
>
> Hanno BÃck wrote:
>
> > > That would be worth investigating, yes.. If you can provide the dmesg
> > > output from bootup, as well as the output of hdparm --Istdout on the
> > > disk device, that would be useful..
> > >     
> >
> > That (and a bit more, normal hdparm output, smartctl output) here:
> > http://files.hboeck.de/conner/
> >   
>
>   It has the current capacity in words 57-58 swapped:
>
> /dev/sdb:
> 0c5a 037f 0000 000a 8723 0275 0037 0030
> 000a 0000 2020 2020 2020 2020 2020 424d
> 3948 4d31 5020 2020 0003 0040 0004 302e
> 3336 2020 2020 436f 6e6e 6572 2050 6572
> 6970 6865 7261 6c73 2032 3430 4d42 202d
> 2043 5033 3032 3534 2020 2020 2020 8010
> 0000 0001 0000 0200 0202 0001 037f 000a
> 0037 0007 82da 0000 0000 0000 0000 0000
>
>
>   It must be 82da 0007, not 0007 82da.
>   IIRC, the IDE core doesn't trust the value reported in these words 
..

That's right.  I wrote the IDE code that way
*specifically* due to a (different) Conner drive
I had here at the time.

Cheers
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/