Re: REALLY SOLVED support of touchscreen reported as eGalax but isnot working

[Max Weninger]

Hi

On Sun, 8 Feb 2009 17:01:57 +0100
Daniel Ritz <daniel.ritz-ml@xxxxxxxxxxxxxx> wrote:

> On Wednesday 04 February 2009 22:59:42 Max Weninger wrote:
> > Hi
> > 
> > On Wed, 4 Feb 2009 00:44:11 +0100
> > Daniel Ritz <daniel.ritz-ml@xxxxxxxxxxxxxx> wrote:
> > 
> > > On Tuesday 03 February 2009 07:59:29 Andrew Morton wrote:
> > > > On Sat, 31 Jan 2009 23:09:01 +0100 Max Weninger
> > > > <max.weninger@xxxxxxxxx> wrote:
> > > [snip]
> > > > > > > After comparing the usbtouchscreen.c sources between the
> > > > > > > different versions I got it working by commenting the
> > > > > > > follwoing lines
> > > > > > > 
> > > > > > > ...
> > > > > > > #ifdef CONFIG_TOUCHSCREEN_USB_EGALAX
> > > > > > >         /* ignore the HID capable devices, handled by
> > > > > > > usbhid */ {USB_DEVICE_HID_CLASS(0x0eef,
> > > > > > > 0x0001), .driver_info = DEVTYPE_IGNORE},
> > > > > > > {USB_DEVICE_HID_CLASS(0x0eef, 0x0002), .driver_info =
> > > > > > > DEVTYPE_IGNORE}, ...
> > > > > > > 
> > > > > > > Now the entry in /proc/bus/input/devices is created as in
> > > > > > > the older versions.
> > > > > > > 
> > > > > > > So it seems that usbhid is not correctly handling my type
> > > > > > > of touchscreen if I understand the comment there correctly
> > > > > > > 
> > > > > > 
> > > > > > So... how do we fix this for real?
> > > > > 
> > > > > Well I am really not an expert in kernel programming :-)
> > > > > I found out that these lines where added based on this thread
> > > > > from 2008
> > > > > 
> > > > > http://kerneltrap.org/mailarchive/linux-kernel/2008/6/28/2286264/thread
> > > > > 
> > > > > So all I can do is to provide any help in testing if needed
> > > > > 
> > > > 
> > > > (optimistically cc'ing Daniel).
> > > 
> > > looks like it worked :)
> > > 
> > > ermm, that ignoring code...seems like i was just a little bit
> > > stupid when i wrote it...
> > > 
> > > Max, please try the attached patch...
> > 
> > I patched usbtouchscreen.c in my 2.6.28.2 kernel
> > 
> > But if I look in /proc/bus/usb/devices
> > the touchscreen is now managed from the usbhid driver
> > so usbtouchscreen is again ignoring my device
> > 
> [...]
> > So sorry no success here
> > 
> [...]
> 
> errm, forget the patch i sent you...it just couldn't work:
> instead of the flag USB_DEVICE_ID_MATCH_INT_PROTOCOL i took
> USB_DEVICE_ID_MATCH_DEV_PROTOCOL which is just wrong wrong wrong :)
> 
> fixed patch attached.

Now it works! :-)

Thanks a lot

Regards

Max

> rgds
> -daniel, looking for that brown paper bag
> 
> ----------
> [PATCH] usbtouchscreen: fix eGalax HID ignoring
> 
> Fix the eGalax/EETI HID device ignoring by adding a match for the
> protocol too. This is what the marco USB_DEVICE_HID_CLASS() was
> supposed to do anyways.
> 
> Devices confirmed to be real HID have the class set to HID and the
> protocol set to 'mouse'.  Some have HID class but protocol set to
> 'none'. Those are not HID and should be driven by usbtouchscreen.
> 
> Signed-off-by: Daniel Ritz <daniel.ritz@xxxxxx>
> 
> diff --git a/drivers/input/touchscreen/usbtouchscreen.c
> b/drivers/input/touchscreen/usbtouchscreen.c index 5080b26..b383625
> 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c
> +++ b/drivers/input/touchscreen/usbtouchscreen.c
> @@ -118,6 +118,7 @@ enum {
>  
>  #define USB_DEVICE_HID_CLASS(vend, prod) \
>  	.match_flags = USB_DEVICE_ID_MATCH_INT_CLASS \
> +		| USB_DEVICE_ID_MATCH_INT_PROTOCOL \
>  		| USB_DEVICE_ID_MATCH_DEVICE, \
>  	.idVendor = (vend), \
>  	.idProduct = (prod), \
> 
> 
>

Attachment: signature.asc
Description: PGP signature