Re: [2.6.29-rc2] ALi USB OHCI enables interrupts during power down in suspend.

From: Rafael J. Wysocki
Date: Mon Jan 19 2009 - 14:14:47 EST

Next message: Pavel Machek: "Re: Suspend/resume works in 2.6.29-0.19.rc0.git9.fc11.i686, butfails in later versions"
Previous message: Pavel Machek: "Re: introduce delayed-leds.h to reduce code duplication"
In reply to: Andrey Borzenkov: "[2.6.29-rc2] ALi USB OHCI enables interrupts during power down in suspend."
Next in thread: Andrey Borzenkov: "Re: [2.6.29-rc2] ALi USB OHCI enables interrupts during power down in suspend."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Monday 19 January 2009, Andrey Borzenkov wrote:
> On 19 ÑÐÐÐÑÑ 2009 12:51:12 Rafael J. Wysocki wrote:
> > On Monday 19 January 2009, Andrey Borzenkov wrote:
> > > On 19 ÑÐÐÐÑÑ 2009 03:17:49 Rafael J. Wysocki wrote:
> > > > On Sunday 18 January 2009, Andrey Borzenkov wrote:
> > > > > On 18 ÑÐÐÐÑÑ 2009 23:21:24 Rafael J. Wysocki wrote:
> > > > > > > > As far as I can tell, timekeeping_resume is called via
> > > > > > > > class ->resume method; and according to comments in
> > > > > > > > sysdev_resume() and device_power_up(), they are called
> > > > > > > > with interrupts disabled.
> > > > > > > >
> > > > > > > > Looking at suspend_enter, irqs *are* disabled at this
> > > > > > > > point.
> > > > > > > >
> > > > > > > > So it actually looks like something (may be some driver)
> > > > > > > > unconditionally enabled irqs in resume path.
> > > > > > > >
> > > > > > > > I believe the patch should be hold back until this is
> > > > > > > > clarified.
> > > > > > >
> > > > > > > That's a nice theory!
> > > > > >
> > > > > > That would be a bad bug.
> [...]
> >
> > However, I suspect the problem is somewhere else.
> >
>
> Right.
>
> > Can you apply the patch I sent earlier in this thread
> > (http://lkml.org/lkml/2009/1/18/183) and retest?
> >
>
> I did and it was silent. But with patch below I get:
>
> [ 152.526550] Freezing user space processes ... (elapsed 0.01 seconds)
> done.
> [ 152.544162] Freezing remaining freezable tasks ... (elapsed 0.00 seconds)
> done.
> [ 152.544854] Suspending console(s) (use no_console_suspend to debug)
> [ 152.556234] sd 0:0:0:0: [sda] Synchronizing SCSI cache
> [ 152.907091] sd 0:0:0:0: [sda] Stopping disk
> [ 153.579824] pci 0000:01:00.0: power state changed by ACPI to D3
> [ 153.594449] e100 0000:00:0a.0: PME# enabled
> [ 153.594688] e100 0000:00:0a.0: wake-up capability enabled by ACPI
> [ 153.594855] e100 0000:00:0a.0: PCI INT A disabled
> [ 153.650834] ALI 5451 0000:00:06.0: PCI INT A disabled
> [ 153.663826] ALI 5451 0000:00:06.0: power state changed by ACPI to D3
> [ 154.417072] pata_ali 0000:00:04.0: can't derive routing for PCI INT A
> [ 154.430275] ohci_hcd 0000:00:02.0: PME# enabled
> [ 154.430490] ohci_hcd 0000:00:02.0: wake-up capability enabled by ACPI
> [ 154.430520] ohci_hcd 0000:00:02.0: PCI INT A disabled
> [ 154.446867] ACPI: Preparing to enter system sleep state S3
> [ 154.460237] ------------[ cut here ]------------
> [ 154.460250] WARNING: at /home/bor/src/linux-
> git/drivers/base/power/main.c:579 device_power_down+0x18f/0x1e0()
> [ 154.460259] Hardware name: PORTEGE 4000
> [ 154.460265] Interrupts enabled after 0000:00:02.0!
>
> The device is
>
> {pts/2}% lspci -nnv -s 00:02.0
> 00:02.0 USB Controller [0c03]: ALi Corporation USB 1.1 Controller
> [10b9:5237] (rev 03) (prog-if 10 [OHCI])
> Subsystem: Toshiba America Info Systems Device [1179:0004]
> Flags: bus master, medium devsel, latency 64, IRQ 11
> Memory at f7eff000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: <access denied>
> Kernel driver in use: ohci_hcd
> Kernel modules: ohci-hcd
>
> and this does not surprise me at all given all the problems I had with this
> USB controller.
>
> Suspicious is
>
> ohci_hcd 0000:00:02.0: wake-up capability enabled by ACPI
>
> this controller has history of broken wake up functionality.

Ah.

Can you please check if the appended patch fixes the issue for you?

Rafael

---
drivers/usb/core/hcd-pci.c | 116 ++++++++++----------------------------------
drivers/usb/core/hcd.h | 1
drivers/usb/host/ehci-pci.c | 1
drivers/usb/host/ohci-pci.c | 1
drivers/usb/host/uhci-hcd.c | 1
5 files changed, 27 insertions(+), 93 deletions(-)

Index: linux-2.6/drivers/usb/core/hcd-pci.c
===================================================================
--- linux-2.6.orig/drivers/usb/core/hcd-pci.c
+++ linux-2.6/drivers/usb/core/hcd-pci.c
@@ -200,6 +200,7 @@ int usb_hcd_pci_suspend(struct pci_dev *
struct usb_hcd *hcd = pci_get_drvdata(dev);
int retval = 0;
int wake, w;
+ int has_pci_pm;

/* Root hub suspend should have stopped all downstream traffic,
* and all bus master traffic. And done so for both the interface
@@ -229,6 +230,15 @@ int usb_hcd_pci_suspend(struct pci_dev *

synchronize_irq(dev->irq);

+ /* Downstream ports from this root hub should already be quiesced, so
+ * there will be no DMA activity. Now we can shut down the upstream
+ * link (except maybe for PME# resume signaling) and enter some PCI
+ * low power state, if the hardware allows.
+ */
+ pci_disable_device(dev);
+
+ pci_save_state(dev);
+
/* Don't fail on error to enable wakeup. We rely on pci code
* to reject requests the hardware can't implement, rather
* than coding the same thing.
@@ -240,35 +250,6 @@ int usb_hcd_pci_suspend(struct pci_dev *
wake = w;
dev_dbg(&dev->dev, "wakeup: %d\n", wake);

- /* Downstream ports from this root hub should already be quiesced, so
- * there will be no DMA activity. Now we can shut down the upstream
- * link (except maybe for PME# resume signaling) and enter some PCI
- * low power state, if the hardware allows.
- */
- pci_disable_device(dev);
- done:
- return retval;
-}
-EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);
-
-/**
- * usb_hcd_pci_suspend_late - suspend a PCI-based HCD after IRQs are disabled
- * @dev: USB Host Controller being suspended
- * @message: Power Management message describing this state transition
- *
- * Store this function in the HCD's struct pci_driver as .suspend_late.
- */
-int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t message)
-{
- int retval = 0;
- int has_pci_pm;
-
- /* We might already be suspended (runtime PM -- not yet written) */
- if (dev->current_state != PCI_D0)
- goto done;
-
- pci_save_state(dev);
-
/* Don't change state if we don't need to */
if (message.event == PM_EVENT_FREEZE ||
message.event == PM_EVENT_PRETHAW) {
@@ -314,7 +295,7 @@ int usb_hcd_pci_suspend_late(struct pci_
done:
return retval;
}
-EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_late);
+EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend);

/**
* usb_hcd_pci_resume_early - resume a PCI-based HCD before IRQs are enabled
@@ -324,65 +305,8 @@ EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_la
*/
int usb_hcd_pci_resume_early(struct pci_dev *dev)
{
- int retval = 0;
- pci_power_t state = dev->current_state;
-
-#ifdef CONFIG_PPC_PMAC
- /* Reenable ASIC clocks for USB */
- if (machine_is(powermac)) {
- struct device_node *of_node;
-
- of_node = pci_device_to_OF_node(dev);
- if (of_node)
- pmac_call_feature(PMAC_FTR_USB_ENABLE,
- of_node, 0, 1);
- }
-#endif
-
- /* NOTE: chip docs cover clean "real suspend" cases (what Linux
- * calls "standby", "suspend to RAM", and so on). There are also
- * dirty cases when swsusp fakes a suspend in "shutdown" mode.
- */
- if (state != PCI_D0) {
-#ifdef DEBUG
- int pci_pm;
- u16 pmcr;
-
- pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM);
- pci_read_config_word(dev, pci_pm + PCI_PM_CTRL, &pmcr);
- pmcr &= PCI_PM_CTRL_STATE_MASK;
- if (pmcr) {
- /* Clean case: power to USB and to HC registers was
- * maintained; remote wakeup is easy.
- */
- dev_dbg(&dev->dev, "resume from PCI D%d\n", pmcr);
- } else {
- /* Clean: HC lost Vcc power, D0 uninitialized
- * + Vaux may have preserved port and transceiver
- * state ... for remote wakeup from D3cold
- * + or not; HCD must reinit + re-enumerate
- *
- * Dirty: D0 semi-initialized cases with swsusp
- * + after BIOS init
- * + after Linux init (HCD statically linked)
- */
- dev_dbg(&dev->dev, "resume from previous PCI D%d\n",
- state);
- }
-#endif
-
- retval = pci_set_power_state(dev, PCI_D0);
- } else {
- /* Same basic cases: clean (powered/not), dirty */
- dev_dbg(&dev->dev, "PCI legacy resume\n");
- }
-
- if (retval < 0)
- dev_err(&dev->dev, "can't resume: %d\n", retval);
- else
- pci_restore_state(dev);
-
- return retval;
+ pci_restore_state(dev);
+ return 0;
}
EXPORT_SYMBOL_GPL(usb_hcd_pci_resume_early);

@@ -397,6 +321,18 @@ int usb_hcd_pci_resume(struct pci_dev *d
struct usb_hcd *hcd;
int retval;

+#ifdef CONFIG_PPC_PMAC
+ /* Reenable ASIC clocks for USB */
+ if (machine_is(powermac)) {
+ struct device_node *of_node;
+
+ of_node = pci_device_to_OF_node(dev);
+ if (of_node)
+ pmac_call_feature(PMAC_FTR_USB_ENABLE,
+ of_node, 0, 1);
+ }
+#endif
+
hcd = pci_get_drvdata(dev);
if (hcd->state != HC_STATE_SUSPENDED) {
dev_dbg(hcd->self.controller,
@@ -404,6 +340,8 @@ int usb_hcd_pci_resume(struct pci_dev *d
return 0;
}

+ pci_enable_wake(dev, PCI_D0, false);
+
retval = pci_enable_device(dev);
if (retval < 0) {
dev_err(&dev->dev, "can't re-enable after resume, %d!\n",
Index: linux-2.6/drivers/usb/core/hcd.h
===================================================================
--- linux-2.6.orig/drivers/usb/core/hcd.h
+++ linux-2.6/drivers/usb/core/hcd.h
@@ -257,7 +257,6 @@ extern void usb_hcd_pci_remove(struct pc

#ifdef CONFIG_PM
extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t msg);
-extern int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t msg);
extern int usb_hcd_pci_resume_early(struct pci_dev *dev);
extern int usb_hcd_pci_resume(struct pci_dev *dev);
#endif /* CONFIG_PM */
Index: linux-2.6/drivers/usb/host/ehci-pci.c
===================================================================
--- linux-2.6.orig/drivers/usb/host/ehci-pci.c
+++ linux-2.6/drivers/usb/host/ehci-pci.c
@@ -432,7 +432,6 @@ static struct pci_driver ehci_pci_driver

#ifdef CONFIG_PM
.suspend = usb_hcd_pci_suspend,
- .suspend_late = usb_hcd_pci_suspend_late,
.resume_early = usb_hcd_pci_resume_early,
.resume = usb_hcd_pci_resume,
#endif
Index: linux-2.6/drivers/usb/host/ohci-pci.c
===================================================================
--- linux-2.6.orig/drivers/usb/host/ohci-pci.c
+++ linux-2.6/drivers/usb/host/ohci-pci.c
@@ -487,7 +487,6 @@ static struct pci_driver ohci_pci_driver

#ifdef CONFIG_PM
.suspend = usb_hcd_pci_suspend,
- .suspend_late = usb_hcd_pci_suspend_late,
.resume_early = usb_hcd_pci_resume_early,
.resume = usb_hcd_pci_resume,
#endif
Index: linux-2.6/drivers/usb/host/uhci-hcd.c
===================================================================
--- linux-2.6.orig/drivers/usb/host/uhci-hcd.c
+++ linux-2.6/drivers/usb/host/uhci-hcd.c
@@ -942,7 +942,6 @@ static struct pci_driver uhci_pci_driver

#ifdef CONFIG_PM
.suspend = usb_hcd_pci_suspend,
- .suspend_late = usb_hcd_pci_suspend_late,
.resume_early = usb_hcd_pci_resume_early,
.resume = usb_hcd_pci_resume,
#endif /* PM */

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

Next message: Pavel Machek: "Re: Suspend/resume works in 2.6.29-0.19.rc0.git9.fc11.i686, butfails in later versions"
Previous message: Pavel Machek: "Re: introduce delayed-leds.h to reduce code duplication"
In reply to: Andrey Borzenkov: "[2.6.29-rc2] ALi USB OHCI enables interrupts during power down in suspend."
Next in thread: Andrey Borzenkov: "Re: [2.6.29-rc2] ALi USB OHCI enables interrupts during power down in suspend."
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]