Re: PROBLEM: Can't boot a (HZ = 1000) kernel using an AMD Phenom-IIprocessor

From: Mark Hounschell
Date: Mon Jan 19 2009 - 03:48:33 EST

Mark Hounschell wrote:
> I upgraded from a Phenom to a Phenom-II processor and I could no longer boot.
>
> I have tried kernels from 2.6.26 through 2.6.28.
>
> I _can_ however boot these kernels when they are configured for HZ = 250. I
> haven't tried HZ = 300. But certainly if HZ = 1000 the boot hangs at the spot
> indicated below in the dmesg output.
>
> The machine is up and stable running 2.6.26.8 with a (HZ = 1000) configured kernel.
>

The machine is up and stable running 2.6.26.8 with a (HZ = 250) configured
kernel. Sorry.

> While running a 2.6.26.8 kernel configured for HZ = 250:
>
> /proc/version:
>
> Linux version 2.6.26.8 (root@harley) (gcc version 4.3.1 20080507 (prerelease)
> [gcc-4_3-branch revision 135036] (SUSE Linux) ) #2 SMP PREEMPT Sat Jan 17
> 16:37:58 EST 2009
>
>
> scripts/ver_linux:
>
> If some fields are empty or look unusual you may have an old version.
> Compare to the current minimal requirements in Documentation/Changes.
>
> Linux harley 2.6.26.8 #2 SMP PREEMPT Sat Jan 17 16:37:58 EST 2009 i686 athlon
> i386 GNU/Linux
>
> Gnu C 4.3
> Gnu make 3.81
> binutils 11.0
> 2.18.50.20080409
> 11.1
> util-linux 2.13.1
> mount 2.13.1
> module-init-tools 3.4
> e2fsprogs 1.40.8
> reiserfsprogs 3.6.19
> PPP 2.4.4
> Linux C Library 2.8
> Dynamic linker (ldd) 2.8
> Procps 3.2.7
> Net-tools 1.60
> Kbd 1.12
> Sh-utils 6.11
> udev 120
> wireless-tools 29
> Modules Loaded ip6t_LOG xt_tcpudp xt_pkttype ipt_LOG xt_limit
> snd_pcm_oss snd_mixer_oss snd_seq snd_seq_device appletalk ax25 ipx p8023
> ip6t_REJECT nf_conntrack_ipv6 ipt_REJECT xt_state iptable_mangle iptable_nat
> nf_nat iptable_filter ip6table_mangle nf_conntrack_netbios_ns nf_conntrack_ipv4
> nf_conntrack ip_tables ip6table_filter ip6_tables x_tables ipv6 fuse loop dm_mod
> snd_hda_intel snd_pcm snd_timer ati_agp nvidia snd ppdev rtc_cmos ide_cd_mod
> i2c_piix4 parport_pc rtc_core usb_storage usblp soundcore cdrom agpgart
> snd_page_alloc parport rtc_lib e1000e ide_disk i2c_core sg ehci_hcd ohci_hcd
> sd_mod usbcore ssb e1000 sky2 edd ext3 mbcache jbd aic7xxx scsi_transport_spi
> atiixp ide_core ahci pata_jmicron libata scsi_mod dock
>
>
> /proc/cpuinfo:
>
> processor : 0
> vendor_id : AuthenticAMD
> cpu family : 16
> model : 4
> model name : AMD Processor model unknown
> stepping : 2
> cpu MHz : 3000.306
> cache size : 512 KB
> physical id : 0
> siblings : 4
> core id : 0
> cpu cores : 4
> apicid : 0
> initial apicid : 0
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 5
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
> pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp
> lm 3dnowext 3dnow constant_tsc pni monitor cx16 popcnt lahf_lm cmp_legacy svm
> extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
> bogomips : 3956.73
> clflush size : 64
> power management: ts ttp tm stc 100mhzsteps hwpstate
>
> processor : 1
> vendor_id : AuthenticAMD
> cpu family : 16
> model : 4
> model name : AMD Processor model unknown
> stepping : 2
> cpu MHz : 3000.306
> cache size : 512 KB
> physical id : 0
> siblings : 4
> core id : 2
> cpu cores : 4
> apicid : 2
> initial apicid : 2
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 5
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
> pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp
> lm 3dnowext 3dnow constant_tsc pni monitor cx16 popcnt lahf_lm cmp_legacy svm
> extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
> bogomips : 6000.60
> clflush size : 64
> power management: ts ttp tm stc 100mhzsteps hwpstate
>
> processor : 2
> vendor_id : AuthenticAMD
> cpu family : 16
> model : 4
> model name : AMD Processor model unknown
> stepping : 2
> cpu MHz : 3000.306
> cache size : 512 KB
> physical id : 0
> siblings : 4
> core id : 1
> cpu cores : 4
> apicid : 1
> initial apicid : 1
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 5
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
> pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp
> lm 3dnowext 3dnow constant_tsc pni monitor cx16 popcnt lahf_lm cmp_legacy svm
> extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
> bogomips : 6000.47
> clflush size : 64
> power management: ts ttp tm stc 100mhzsteps hwpstate
>
> processor : 3
> vendor_id : AuthenticAMD
> cpu family : 16
> model : 4
> model name : AMD Processor model unknown
> stepping : 2
> cpu MHz : 3000.306
> cache size : 512 KB
> physical id : 0
> siblings : 4
> core id : 3
> cpu cores : 4
> apicid : 3
> initial apicid : 3
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 5
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov
> pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp
> lm 3dnowext 3dnow constant_tsc pni monitor cx16 popcnt lahf_lm cmp_legacy svm
> extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt
> bogomips : 6000.47
> clflush size : 64
> power management: ts ttp tm stc 100mhzsteps hwpstate
>
>
> dmesg:
>
> Initializing cgroup subsys cpuset
> Linux version 2.6.26.8-lcrs (root@harley) (gcc version 4.3.1 20080507
> (prerelease) [gcc-4_3-branch revision 135036] (SUSE Linux) ) #2 SMP PREEMPT Sat
> Jan 17 16:37:58 EST 2009
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable)
> BIOS-e820: 00000000bffe0000 - 00000000bffe3000 (ACPI NVS)
> BIOS-e820: 00000000bffe3000 - 00000000bfff0000 (ACPI data)
> BIOS-e820: 00000000bfff0000 - 00000000c0000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
> x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
> Warning only 4GB will be used.
> Use a HIGHMEM64G enabled kernel.
> 3264MB HIGHMEM available.
> 832MB LOWMEM available.
> found SMP MP-table at [c00f3f00] 000f3f00
> Entering add_active_range(0, 0, 1048576) 0 entries of 256 used
> Zone PFN ranges:
> DMA 0 -> 4096
> Normal 4096 -> 212992
> HighMem 212992 -> 1048576
> Movable zone start PFN for each node
> early_node_map[1] active PFN ranges
> 0: 0 -> 1048576
> On node 0 totalpages: 1048576
> DMA zone: 32 pages used for memmap
> DMA zone: 0 pages reserved
> DMA zone: 4064 pages, LIFO batch:0
> Normal zone: 1632 pages used for memmap
> Normal zone: 207264 pages, LIFO batch:31
> HighMem zone: 6528 pages used for memmap
> HighMem zone: 829056 pages, LIFO batch:31
> Movable zone: 0 pages used for memmap
> DMI 2.5 present.
> ACPI: RSDP 000F7FB0, 0024 (r2 RX780 )
> ACPI: XSDT BFFE3080, 004C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
> ACPI: FACP BFFE8C80, 00F4 (r3 RX780 AWRDACPI 42302E31 AWRD 0)
> ACPI: DSDT BFFE3200, 5A71 (r1 RX780 AWRDACPI 1000 MSFT 100000E)
> ACPI: FACS BFFE0000, 0040
> ACPI: SSDT BFFE8E40, 088C (r1 PTLTD POWERNOW 1 LTP 1)
> ACPI: HPET BFFE9700, 0038 (r1 RX780 AWRDACPI 42302E31 AWRD 98)
> ACPI: MCFG BFFE9740, 003C (r1 RX780 AWRDACPI 42302E31 AWRD 0)
> ACPI: APIC BFFE8D80, 0084 (r1 RX780 AWRDACPI 42302E31 AWRD 0)
> ATI board detected. Disabling timer routing over 8254.
> ACPI: PM-Timer IO Port: 0x4008
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Enabling APIC mode: Flat. Using 1 I/O APICs
> ACPI: HPET id: 0x10b9a201 base: 0xfed00000
> Using ACPI (MADT) for SMP configuration information
> Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
> SMP: Allowing 4 CPUs, 0 hotplug CPUs
> PERCPU: Allocating 38788 bytes of per cpu data
> NR_CPUS: 32, nr_cpu_ids: 4
> Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040384
> Kernel command line: root=/dev/sda5 hwprobe=-modules.pata apm=off selinux=0
> noresume splash=silent bigphysarea=0x4000 vmalloc=192M vga=0x317
> mapped APIC to ffffb000 (fee00000)
> mapped IOAPIC to ffffa000 (fec00000)
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Initializing CPU#0
> Preemptible RCU implementation.
> PID hash table entries: 4096 (order: 12, 16384 bytes)
> Detected 3000.306 MHz processor.
> Console: colour dummy device 80x25
> console [tty0] enabled
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Memory: 3031940k/4194304k available (1748k kernel code, 112564k reserved, 732k
> data, 216k init, 2293632k highmem)
> virtual kernel memory layout:
> fixmap : 0xffe15000 - 0xfffff000 (1960 kB)
> pkmap : 0xff800000 - 0xffc00000 (4096 kB)
> vmalloc : 0xf4800000 - 0xff7fe000 ( 175 MB)
> lowmem : 0xc0000000 - 0xf4000000 ( 832 MB)
> .init : 0xc0373000 - 0xc03a9000 ( 216 kB)
> .data : 0xc02b5336 - 0xc036c6d0 ( 732 kB)
> .text : 0xc0100000 - 0xc02b5336 (1748 kB)
> Checking if this processor honours the WP bit even in supervisor mode...Ok.
>
>
> The 2.6.26.8 kernel hangs up right here.
>
>
> CPA: page pool initialized 1 of 1 pages preallocated
> SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
> hpet clockevent registered
> calibrate_delay_direct() failed to get a good estimate for loops_per_jiffy.
> Probably due to long platform interrupts. Consider using "lpj=" boot option.
> Calibrating delay loop... 3956.73 BogoMIPS (lpj=7913472)
> Security Framework initialized
> Capability LSM initialized
> Mount-cache hash table entries: 512
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> CPU 0(4) -> Core 0
> Checking 'hlt' instruction... OK.
> ACPI: Core revision 20080321
> ENABLING IO-APIC IRQs
> ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> CPU0: AMD Processor model unknown stepping 02
> Booting processor 1/1 ip 2000
> Initializing CPU#1
> Calibrating delay using timer specific routine.. 6000.60 BogoMIPS (lpj=12001200)
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> CPU 1(4) -> Core 2
> x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
> CPU1: AMD Processor model unknown stepping 02
> Booting processor 2/2 ip 2000
> Initializing CPU#2
> Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000950)
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> CPU 2(4) -> Core 1
> x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
> CPU2: AMD Processor model unknown stepping 02
> Booting processor 3/3 ip 2000
> Initializing CPU#3
> Calibrating delay using timer specific routine.. 6000.47 BogoMIPS (lpj=12000955)
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 512K (64 bytes/line)
> CPU 3(4) -> Core 3
> x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
> CPU3: AMD Processor model unknown stepping 02
> Brought up 4 CPUs
> Total of 4 processors activated (21958.28 BogoMIPS).
> net_namespace: 660 bytes
> NET: Registered protocol family 16
> ACPI: bus type pci registered
> PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
> PCI: MCFG area at e0000000 reserved in E820
> PCI: Using MMCONFIG for extended config space
> PCI: Using configuration type 1 for base access
> Setting up standard PCI resources
> ACPI: EC: Look up EC in DSDT
> ACPI: Interpreter enabled
> ACPI: (supports S0 S5)
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> pci 0000:00:12.0: set SATA to AHCI mode
> PCI: Transparent bridge - 0000:00:14.4
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> ACPI: bus type pnp registered
> pnp 00:0d: mem resource (0xfed00000-0xfed000ff) overlaps 0000:00:00.0 BAR 3
> (0xe0000000-0xffffffff), disabling
> pnp 00:0d: mem resource (0xffff0000-0xffffffff) overlaps 0000:00:00.0 BAR 3
> (0xe0000000-0xffffffff), disabling
> pnp 00:0d: mem resource (0xfec00000-0xfec00fff) overlaps 0000:00:00.0 BAR 3
> (0xe0000000-0xffffffff), disabling
> pnp 00:0d: mem resource (0xfee00000-0xfee00fff) overlaps 0000:00:00.0 BAR 3
> (0xe0000000-0xffffffff), disabling
> pnp 00:0d: mem resource (0xfff80000-0xfffeffff) overlaps 0000:00:00.0 BAR 3
> (0xe0000000-0xffffffff), disabling
> pnp: PnP ACPI: found 14 devices
> ACPI: ACPI bus type pnp unregistered
> PnPBIOS: Disabled by ACPI PNP
> PCI: Using ACPI for IRQ routing
> PCI: Cannot allocate resource region 3 of device 0000:00:00.0
> hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
> hpet0: 4 32-bit timers, 14318180 Hz
> ACPI: RTC can wake from S4
> Switched to high resolution mode on CPU 0
> Switched to high resolution mode on CPU 2
> Switched to high resolution mode on CPU 1
> Switched to high resolution mode on CPU 3
> system 00:01: ioport range 0x4100-0x411f has been reserved
> system 00:01: ioport range 0x228-0x22f has been reserved
> system 00:01: ioport range 0x40b-0x40b has been reserved
> system 00:01: ioport range 0x4d6-0x4d6 has been reserved
> system 00:01: ioport range 0xc00-0xc01 has been reserved
> system 00:01: ioport range 0xc14-0xc14 has been reserved
> system 00:01: ioport range 0xc50-0xc52 has been reserved
> system 00:01: ioport range 0xc6c-0xc6d has been reserved
> system 00:01: ioport range 0xc6f-0xc6f has been reserved
> system 00:01: ioport range 0xcd0-0xcd1 has been reserved
> system 00:01: ioport range 0xcd2-0xcd3 has been reserved
> system 00:01: ioport range 0xcd4-0xcdf has been reserved
> system 00:01: ioport range 0x4000-0x40fe has been reserved
> system 00:01: ioport range 0x4210-0x4217 has been reserved
> system 00:01: ioport range 0xb10-0xb1f has been reserved
> system 00:07: ioport range 0x4d0-0x4d1 has been reserved
> system 00:07: ioport range 0x220-0x225 has been reserved
> system 00:0d: iomem range 0xf0000-0xfffff could not be reserved
> system 00:0d: iomem range 0x0-0x1fffff could not be reserved
> system 00:0d: iomem range 0xbffe0000-0xbfffffff could not be reserved
> system 00:0d: iomem range 0x0-0x9ffff could not be reserved
> system 00:0d: iomem range 0x100000-0xbffdffff could not be reserved
> PCI: Bridge: 0000:00:02.0
> IO window: d000-dfff
> MEM window: 0xf8000000-0xfbffffff
> PREFETCH window: 0x00000000c0000000-0x00000000dfffffff
> PCI: Bridge: 0000:00:04.0
> IO window: c000-cfff
> MEM window: 0xfdc00000-0xfdcfffff
> PREFETCH window: 0x00000000fdb00000-0x00000000fdbfffff
> PCI: Bridge: 0000:00:06.0
> IO window: b000-bfff
> MEM window: 0xfda00000-0xfdafffff
> PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff
> PCI: Bridge: 0000:00:07.0
> IO window: e000-efff
> MEM window: 0xfde00000-0xfdefffff
> PREFETCH window: 0x00000000fdd00000-0x00000000fddfffff
> PCI: Bridge: 0000:00:14.4
> IO window: a000-afff
> MEM window: 0xfd900000-0xfd9fffff
> PREFETCH window: 0x00000000fd800000-0x00000000fd8fffff
> ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 18 (level, low) -> IRQ 18
> PCI: Setting latency timer of device 0000:00:02.0 to 64
> ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:00:04.0 to 64
> ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 18 (level, low) -> IRQ 18
> PCI: Setting latency timer of device 0000:00:06.0 to 64
> ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 19 (level, low) -> IRQ 19
> PCI: Setting latency timer of device 0000:00:07.0 to 64
> NET: Registered protocol family 2
> IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
> TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
> TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
> TCP: Hash tables configured (established 131072 bind 65536)
> TCP reno registered
> NET: Registered protocol family 1
> Unpacking initramfs... done
> Freeing initrd memory: 10039k freed
> audit: initializing netlink socket (disabled)
> type=2000 audit(1232260163.932:1): initialized
> highmem bounce pool size: 64 pages
> Total HugeTLB memory allocated, 0
> bigphysarea: Allocated 16384 pages at 0xc3038000.
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> msgmni has been set to 1462
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> pci 0000:01:00.0: Boot video device
> PCI: Setting latency timer of device 0000:00:02.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:02.0:pcie00]
> PCI: Setting latency timer of device 0000:00:04.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:04.0:pcie00]
> PCI: Setting latency timer of device 0000:00:06.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:06.0:pcie00]
> PCI: Setting latency timer of device 0000:00:07.0 to 64
> assign_interrupt_mode Found MSI capability
> Allocate Port Service[0000:00:07.0:pcie00]
> vesafb: framebuffer at 0xf9000000, mapped to 0xf4880000, using 3072k, total 14336k
> vesafb: mode is 1024x768x16, linelength=2048, pages=1
> vesafb: protected mode interface info at c000:b0a0
> vesafb: pmi: set display start = c00cb103, set palette = c00cb15e
> vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0
> 3d1 3d2 3d3 3d4 3d5 3da
> vesafb: scrolling: redraw
> vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
> Console: switching to colour frame buffer device 128x48
> fb0: VESA VGA frame buffer device
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> hpet_resources: 0xfed00000 is busy
> Serial: 8250/16550 driver $Revision: 1.1.1.1 $ 4 ports, IRQ sharing enabled
> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> serio: i8042 AUX port at 0x60,0x64 irq 12
> mice: PS/2 mouse device common for all mice
> input: AT Translated Set 2 keyboard as /class/input/input0
> input: PC Speaker as /class/input/input1
> logips2pp: Detected unknown logitech mouse model 11
> input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
> Using IPI No-Shortcut mode
> Freeing unused kernel memory: 216k freed
> No dock devices found.
> SCSI subsystem initialized
> libata version 3.00 loaded.
> pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
> ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 19 (level, low) -> IRQ 19
> PCI: Setting latency timer of device 0000:03:00.1 to 64
> scsi0 : pata_jmicron
> scsi1 : pata_jmicron
> ata1: PATA max UDMA/100 cmd 0xbf00 ctl 0xbe00 bmdma 0xbb00 irq 19
> ata2: PATA max UDMA/100 cmd 0xbd00 ctl 0xbc00 bmdma 0xbb08 irq 19
> ahci 0000:00:12.0: version 3.0
> ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22
> ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
> ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
> ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio
> scsi2 : ahci
> scsi3 : ahci
> scsi4 : ahci
> scsi5 : ahci
> ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
> ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
> ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
> ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
> ata3: softreset failed (device not ready)
> ata3: failed due to HW bug, retry pmp=0
> ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata3.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
> ata3.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
> ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
> ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
> ata3.00: configured for UDMA/133
> ata4: softreset failed (device not ready)
> ata4: failed due to HW bug, retry pmp=0
> ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata4.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
> ata4.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
> ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
> ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
> ata4.00: configured for UDMA/133
> ata5: softreset failed (device not ready)
> ata5: failed due to HW bug, retry pmp=0
> ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> ata5.00: ATA-7: ST3320620AS, 3.AAK, max UDMA/133
> ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
> ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
> ata5.00: SB600 AHCI: limiting to 255 sectors per cmd
> ata5.00: configured for UDMA/133
> ata6: SATA link down (SStatus 0 SControl 300)
> scsi 2:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
> scsi 3:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
> scsi 4:0:0:0: Direct-Access ATA ST3320620AS 3.AA PQ: 0 ANSI: 5
> ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18
> ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
> ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
> PCI: Setting latency timer of device 0000:03:00.0 to 64
> scsi6 : ahci
> scsi7 : ahci
> ata7: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe100 irq 18
> ata8: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe180 irq 18
> ata7: SATA link down (SStatus 0 SControl 300)
> ata8: SATA link down (SStatus 0 SControl 300)
> Uniform Multi-Platform E-IDE driver
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> SB600_PATA: IDE controller (0x1002:0x438c rev 0x00) at PCI slot 0000:00:14.1
> ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16
> SB600_PATA: not 100% native mode: will probe irqs later
> ide0: BM-DMA at 0xf900-0xf907
> Probing IDE interface ide0...
> hda: ST3120023A, ATA DISK drive
> hdb: TSSTcorpCD/DVDW TS-H552B, ATAPI CD/DVD-ROM drive
> hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> hda: UDMA/100 mode selected
> hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
> hdb: UDMA/33 mode selected
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 21 (level, low) -> IRQ 21
> scsi8 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
> <Adaptec 2930CU SCSI adapter>
> aic7860: Ultra Single Channel A, SCSI Id=7, 3/253 SCBs
>
> BIOS EDD facility v0.16 2004-Jun-25, 6 devices found
> ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 19 (level, low) -> IRQ 19
> PCI: Setting latency timer of device 0000:04:00.0 to 64
> sky2 0000:04:00.0: v1.21 addr 0xfdefc000 irq 19 Yukon-EC Ultra (0xb4) rev 5
> sky2 eth0: addr 00:e0:4d:7a:8c:ee
> Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
> Copyright (c) 1999-2006 Intel Corporation.
> usbcore: registered new interface driver usbfs
> usbcore: registered new interface driver hub
> Driver 'sd' needs updating - please use bus_type methods
> usbcore: registered new device driver usb
> sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
> sd 2:0:0:0: [sda] Write Protect is off
> sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
> or FUA
> ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
> ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16
> ohci_hcd 0000:00:13.0: OHCI Host Controller
> ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
> ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
> sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
> sd 2:0:0:0: [sda] Write Protect is off
> sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
> sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO
> or FUA
> sda: sda1 sda2 sda3 < sda5<6>usb usb1: configuration #1 chosen from 1 choice
> sda6<6>hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> sda7 sda8 sda9 sda10 >
> sd 2:0:0:0: [sda] Attached SCSI disk
> sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
> sd 3:0:0:0: [sdb] Write Protect is off
> sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO
> or FUA
> sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
> sd 3:0:0:0: [sdb] Write Protect is off
> sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
> sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO
> or FUA
> sdb: sdb1 sdb2 sdb3 <<6>usb usb1: New USB device found, idVendor=1d6b,
> idProduct=0001
> sdb5<6>usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb1: Product: OHCI Host Controller
> sdb6<6>usb usb1: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
> usb usb1: SerialNumber: 0000:00:13.0
> sdb7<6>ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19
> ehci_hcd 0000:00:13.5: EHCI Host Controller
> ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 2
> sdb8<6>ehci_hcd 0000:00:13.5: debug port 1
> ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
> sdb9<6>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb2: configuration #1 chosen from 1 choice
> sdb10 >
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 10 ports detected
> sd 3:0:0:0: [sdb] Attached SCSI disk
> sd 4:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
> sd 4:0:0:0: [sdc] Write Protect is off
> sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO
> or FUA
> sd 4:0:0:0: [sdc] 625142448 512-byte hardware sectors (320073 MB)
> sd 4:0:0:0: [sdc] Write Protect is off
> sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
> sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO
> or FUA
> sdc: sdc1
> sd 4:0:0:0: [sdc] Attached SCSI disk
> usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
> usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb2: Product: EHCI Host Controller
> usb usb2: Manufacturer: Linux 2.6.26.8-lcrs ehci_hcd
> usb usb2: SerialNumber: 0000:00:13.5
> ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17
> ohci_hcd 0000:00:13.1: OHCI Host Controller
> ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
> ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
> usb usb3: configuration #1 chosen from 1 choice
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb3: Product: OHCI Host Controller
> usb usb3: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
> usb usb3: SerialNumber: 0000:00:13.1
> ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18
> ohci_hcd 0000:00:13.2: OHCI Host Controller
> ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
> ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
> usb usb4: configuration #1 chosen from 1 choice
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> usb 2-1: new high speed USB device using ehci_hcd and address 2
> usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb4: Product: OHCI Host Controller
> usb usb4: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
> usb usb4: SerialNumber: 0000:00:13.2
> ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17
> ohci_hcd 0000:00:13.3: OHCI Host Controller
> ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
> ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
> usb 2-1: configuration #1 chosen from 1 choice
> usb 2-1: New USB device found, idVendor=03f0, idProduct=5111
> usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> usb 2-1: Product: Photosmart 3200 series
> usb usb5: configuration #1 chosen from 1 choice
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 2 ports detected
> usb 2-1: Manufacturer: HP
> usb 2-1: SerialNumber: MY5B98310Z045K
> usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb5: Product: OHCI Host Controller
> usb usb5: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
> usb usb5: SerialNumber: 0000:00:13.3
> ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18
> ohci_hcd 0000:00:13.4: OHCI Host Controller
> ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
> ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
> usb usb6: configuration #1 chosen from 1 choice
> hub 6-0:1.0: USB hub found
> hub 6-0:1.0: 2 ports detected
> usb 2-2: new high speed USB device using ehci_hcd and address 3
> usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
> usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> usb usb6: Product: OHCI Host Controller
> usb usb6: Manufacturer: Linux 2.6.26.8-lcrs ohci_hcd
> usb usb6: SerialNumber: 0000:00:13.4
> usb 2-2: configuration #1 chosen from 1 choice
> hub 2-2:1.0: USB hub found
> hub 2-2:1.0: 4 ports detected
> usb 2-2: New USB device found, idVendor=0424, idProduct=2504
> usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda5, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> sd 2:0:0:0: Attached scsi generic sg0 type 0
> sd 3:0:0:0: Attached scsi generic sg1 type 0
> sd 4:0:0:0: Attached scsi generic sg2 type 0
> hda: max request size: 128KiB
> hda: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=65535/16/63
> hda: cache flushes supported
> hda: hda1
> e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k2
> e1000e: Copyright (c) 1999-2008 Intel Corporation.
> ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
> PCI: Setting latency timer of device 0000:02:00.0 to 64
> Linux agpgart interface v0.103
> eth1: (PCI Express:2.5GB/s:Width x1) 00:1b:21:0f:09:1b
> eth1: Intel(R) PRO/1000 Network Connection
> eth1: MAC: 1, PHY: 4, PBA No: d50854-003
> usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x03F0 pid 0x5111
> usbcore: registered new interface driver usblp
> Initializing USB Mass Storage driver...
> scsi9 : SCSI emulation for USB Mass Storage devices
> usb-storage: device found at 2
> usb-storage: waiting for device to settle before scanning
> usbcore: registered new interface driver usb-storage
> USB Mass Storage support registered.
> IT8718 SuperIO detected.
> parport_pc 00:0a: reported by Plug and Play ACPI
> parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
> piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
> hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
> Uniform CD-ROM driver Revision: 3.20
> rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
> rtc0: alarms up to one month
> ppdev: user-space parallel port driver
> nvidia: module license 'NVIDIA' taints kernel.
> ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16
> hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
> ALSA sound/pci/hda/hda_codec.c:3021: autoconfig: line_outs=4
> (0x14/0x15/0x16/0x17/0x0)
> ALSA sound/pci/hda/hda_codec.c:3025: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> ALSA sound/pci/hda/hda_codec.c:3029: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
> ALSA sound/pci/hda/hda_codec.c:3030: mono: mono_out=0x0
> ALSA sound/pci/hda/hda_codec.c:3038: inputs: mic=0x18, fmic=0x19, line=0x1a,
> fline=0x0, cd=0x0, aux=0x0
> ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 18 (level, low) -> IRQ 18
> PCI: Setting latency timer of device 0000:01:00.0 to 64
> NVRM: loading NVIDIA UNIX x86 Kernel Module 177.82 Tue Nov 4 13:35:57 PST 2008
> Adding 8393952k swap on /dev/sda2. Priority:-1 extents:1 across:8393952k
> device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@xxxxxxxxxx
> scsi 9:0:0:0: Direct-Access HP Photosmart 3210 1.00 PQ: 0 ANSI: 2
> sd 9:0:0:0: [sdd] Attached SCSI removable disk
> sd 9:0:0:0: Attached scsi generic sg3 type 0
> usb-storage: device scan complete
> loop: module loaded
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda1, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda6, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda7, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda8, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda9, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda10, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on hda1, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sdc1, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> fuse init (API version 7.9)
> NET: Registered protocol family 10
> lo: Disabled Privacy Extensions
> ip6_tables: (C) 2000-2006 Netfilter Core Team
> ip_tables: (C) 2000-2006 Netfilter Core Team
> nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
> sky2 eth0: enabling interface
> ADDRCONF(NETDEV_UP): eth0: link is not ready
> ADDRCONF(NETDEV_UP): eth1: link is not ready
> sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
> ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
> eth0: no IPv6 routers present
> NET: Registered protocol family 4
> NET: Registered protocol family 3
> NET: Registered protocol family 5
> hda-intel: Invalid position buffer, using LPIB read method instead.
>
>
>
>
> Using a 2.6.28 kernel the dmesg is slightly different and it seems to get a
> little further. The last line on the screen is
>
> Using C1E aware idle routine.
>
> The BIOS on my MB doesn't recognize the processor type either BTW. At post it
> says it an AMD processor type undefined.
>
> Regards
> Mark
>
>
>
>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/