Re: [PATCH] mfd: DA9030 USB charge pump mode selection support

From: Mike Rapoport
Date: Mon Dec 15 2008 - 04:02:35 EST




Jonathan Cameron wrote:
> From: Jonathan Cameron <jic23@xxxxxxxxx>
>
> Add support for changing the mode of the da9030 usb charge pump
>
> Signed-off-by: Jonathan Cameron <jic23@xxxxxxxxx>
>
> --
> This simple driver is intended to allow board configs to control
> the mode in which the usb charge pump on th da9030 pmic is
> running (typically as part of usb enable callbacks).
>
> The 3 options are:
>
> auto - controlled entirely by hardware signals.
> 100mA charge pump manual enable
> 10mA current source manual enable
>
> Note this function is completely separate from the usb charging
> functionality (which will need a much more sophisticated driver).
>
> As ever, all comments welcomed.
>
> The main question on this is whether it should just be rolled into
> the core mfd driver. I'm inclined to keep it separate and decidedly
> optional as the fact it isn't already in the driver implies that
> it may not be commonly used. (Intel Stargate 2 does need this
> functionality though, hence the submission as I'm hoping to get
> the relevant board code in soonish.)

I'm for adding "da9030_set_usb_charge_pump_mode" to the core mfd driver.

> I don't have the da9034 data sheet, so not a clue if this is
> relevant for that as well?
>
> Signed-off-by: Jonathan Cameron <jic23@xxxxxxxxx>
> drivers/mfd/Kconfig | 7 +++
> drivers/mfd/Makefile | 3 +-
> drivers/mfd/da9030-usb.c | 79 ++++++++++++++++++++++++++++++++++++++
> include/linux/mfd/da9030-usbcp.h | 20 ++++++++++
> 4 files changed, 108 insertions(+), 1 deletions(-)
>
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 2572773..d53e82d 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -114,6 +114,13 @@ config PMIC_DA903X
> individual components like LCD backlight, voltage regulators,
> LEDs and battery-charger under the corresponding menus.
>
> +config PMIC_DA9030_USBCP
> + bool "DA9030 USB charge pump mode control"
> + depends on PMIC_DA903X
> + help
> + Say yes here to support control of the USB charge pump on
> + the DA9030 PMIC.
> +
> config MFD_WM8400
> tristate "Support Wolfson Microelectronics WM8400"
> depends on I2C
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index 9a5ad8a..eeb86c9 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -31,4 +31,5 @@ obj-$(CONFIG_MCP_UCB1200) += ucb1x00-assabet.o
> endif
> obj-$(CONFIG_UCB1400_CORE) += ucb1400_core.o
>
> -obj-$(CONFIG_PMIC_DA903X) += da903x.o
> \ No newline at end of file
> +obj-$(CONFIG_PMIC_DA903X) += da903x.o
> +obj-$(CONFIG_PMIC_DA9030_USBCP) += da9030-usb.o
> \ No newline at end of file
> diff --git a/drivers/mfd/da9030-usb.c b/drivers/mfd/da9030-usb.c
> new file mode 100644
> index 0000000..f1160c6
> --- /dev/null
> +++ b/drivers/mfd/da9030-usb.c
> @@ -0,0 +1,79 @@
> +/* mfd/da9030-usb.c
> + *
> + * Minimal control driver for the da9030 usb charge pump.
> + *
> + * Jonathan Cameron <jic23@xxxxxxxxx> 2008
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/interrupt.h>
> +#include <linux/platform_device.h>
> +#include <linux/mfd/da903x.h>
> +#include <linux/mfd/da9030-usbcp.h>
> +
> +/* Single device assumption */
> +struct device *da9030_mfd;
> +
> +int da9030_set_usb_charge_pump_mode(int mode)
> +{
> + uint8_t val = 0;
> +
> + switch (mode) {
> + case DA9030_USBPUMP_AUTO:
> + val = 0;
> + break;
> + case DA9030_USBPUMP_CHARGE_PUMP:
> + val = 0x40;
> + break;
> + case DA9030_USBPUMP_CURRENT_SOURCE:
> + val = 0x80;
> + break;
> + }
> +
> + return da903x_write(da9030_mfd, DA9030_USBPUMP_REG, val);
> +}
> +EXPORT_SYMBOL_GPL(da9030_set_usb_charge_pump_mode);
> +
> +static int __devinit da9030_usb_probe(struct platform_device *pdev)
> +{
> + da9030_mfd = pdev->dev.parent;
> +
> + return 0;
> +}
> +
> +static int __devexit da9030_usb_remove(struct platform_device *pdev)
> +{
> + da9030_mfd = NULL;
> + return 0;
> +}
> +
> +static struct platform_driver da9030_usb_driver = {
> + .driver = {
> + .name = "da9030-usb",
> + .owner = THIS_MODULE,
> + },
> + .probe = da9030_usb_probe,
> + .remove = __devexit_p(da9030_usb_remove),
> +};
> +
> +static int __init da9030_usb_init(void)
> +{
> + return platform_driver_register(&da9030_usb_driver);
> +}
> +module_init(da9030_usb_init);
> +
> +static void __exit da9030_usb_exit(void)
> +{
> + platform_driver_unregister(&da9030_usb_driver);
> +}
> +module_exit(da9030_usb_exit);
> +
> +MODULE_DESCRIPTION("USB charge pump control driver for Dialog DA9030");
> +MODULE_AUTHOR("Jonathan Cameron <jic23@xxxxxxxxx>");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform::da9030-usb");
> diff --git a/include/linux/mfd/da9030-usbcp.h b/include/linux/mfd/da9030-usbcp.h
> new file mode 100644
> index 0000000..62af5a7
> --- /dev/null
> +++ b/include/linux/mfd/da9030-usbcp.h
> @@ -0,0 +1,20 @@
> +/* linux/mfd/da9030-usbcp.h
> + *
> + * Minimal control driver for the da9030 usb charge pump.
> + *
> + * Jonathan Cameron <jic23@xxxxxxxxx> 2008
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +#define DA9030_USBPUMP_AUTO 1
> +#define DA9030_USBPUMP_CHARGE_PUMP 2
> +#define DA9030_USBPUMP_CURRENT_SOURCE 3
> +
> +#define DA9030_USBPUMP_REG 0x19
> +
> +int da9030_set_usb_charge_pump_mode(int mode);
> +
> +
>

--
Sincerely yours,
Mike.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/