Re: [PATCH] virtio: make PCI devices take a virtio_pci module ref

[Mark McLoughlin]

On Fri, 2008-12-05 at 14:17 +0100, Jiri Slaby wrote:
> Michael Tokarev napsal(a):
> > Jiri Slaby wrote:
> >> On 12/04/2008 01:44 PM, Mark McLoughlin wrote:
> >>> Nothing takes a ref on virtio_pci, so even if you have
> >>> devices in use, rmmod will attempt to unload the module.
> >> It unbinds the device properly as any other driver. So what's the problem here?
> > 
> > Here's what we get when rmmod'ing (a zero-refcounted but
> > in use) virtio_pci (I did it by a chance, cut-n-pasted
> > the wrong line):
> > 
> > WARNING: at drivers/base/core.c:122 device_release+0x5f/0x70()
> > Device 'virtio1' does not have a release() function, it is broken and must be fixed.
> > Modules linked in: ext3 jbd mbcache acpiphp dock pci_hotplug virtio_net virtio_blk virtio_pci(-) virtio_ring virtio
> > 
> > Pid: 361, comm: rmmod Tainted: G S        2.6.27-i686smp #2.6.27.7
> >  [<c012b81f>] warn_slowpath+0x6f/0xa0
> >  [<c0110030>] prepare_set+0x30/0x80
> >  [<c012067e>] __wake_up+0x3e/0x60
> >  [<c01d1d25>] release_sysfs_dirent+0x45/0xb0
> >  ...
> 
> So why don't you fix the root cause and add such a crap into the probe
> function (not even counting probe can fail later)?
> 
> Fix the virtio bus instead.

Yeah, the patch I posted wasn't meant as a fix for this traceback.
Here's one that does fix it.

Cheers,
Mark.

From: Mark McLoughlin <markmc@xxxxxxxxxx>
Subject: [PATCH] virtio: add device release() function

Add a release() function for virtio_pci devices so as to avoid:

  Device 'virtio0' does not have a release() function, it is broken and must be fixed

The struct device is embedded in the struct virtio_pci_device which
is freed by virtio_pci_remove(), so virtio_pci_release_dev() need
not actually do anything.

Signed-off-by: Mark McLoughlin <markmc@xxxxxxxxxx>
---
 drivers/virtio/virtio_pci.c |    6 ++++++
 1 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index c7dc37c..7d4899c 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -70,12 +70,17 @@ static struct pci_device_id virtio_pci_id_table[] = {
 
 MODULE_DEVICE_TABLE(pci, virtio_pci_id_table);
 
+static void virtio_pci_release_dev(struct device *dev)
+{
+}
+
 /* A PCI device has it's own struct device and so does a virtio device so
  * we create a place for the virtio devices to show up in sysfs.  I think it
  * would make more sense for virtio to not insist on having it's own device. */
 static struct device virtio_pci_root = {
 	.parent		= NULL,
 	.bus_id		= "virtio-pci",
+	.release	= virtio_pci_release_dev,
 };
 
 /* Convert a generic virtio device to our structure */
@@ -328,6 +333,7 @@ static int __devinit virtio_pci_probe(struct pci_dev *pci_dev,
 		return -ENOMEM;
 
 	vp_dev->vdev.dev.parent = &virtio_pci_root;
+	vp_dev->vdev.dev.release = virtio_pci_release_dev;
 	vp_dev->vdev.config = &virtio_pci_config_ops;
 	vp_dev->pci_dev = pci_dev;
 	INIT_LIST_HEAD(&vp_dev->virtqueues);
-- 
1.6.0.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/